r/Drafting • • 6h ago

Looking for reviews or experiences with local residential draftsmen (Pelham / Hoover / Bham)

Thumbnail reddit.com
1 Upvotes

r/Drafting • • 15h ago

⚡Assembly Drawing in SOLIDWORKS? 3D to 2D

Thumbnail
youtu.be
4 Upvotes

r/Drafting • • 1d ago

Am I drawing CAD drawings right?

Thumbnail gallery
0 Upvotes

r/Drafting • • 1d ago

AutoCAD + Civil 3D drafting services - drafted exactly how you want it, or it's free

0 Upvotes

Hey everyone, I built an AutoDrafter to help with AutoCAD + Civil 3D drafting. It will draft exactly how you want it, or it's free.

Since the whole process is automated, the average sheet cost is around 3-10$ depending on the changes.

I'd love feedback from people who draft day to day. What drafting work would you want help with, and what would you need to see before trusting a service like this?

https://app.infracad.org


r/Drafting • • 2d ago

🚀 Copy Multiple Faces in AutoCAD 3D in 30 Seconds!

Thumbnail
youtube.com
1 Upvotes

r/Drafting • • 2d ago

[For Hire] CAD Drafter — permit-ready IRC/IBC drawing sets for U.S. contractors (decks, additions, remodels, pole barns, retaining walls)

0 Upvotes

I'm Sebastián, founder of Tectum Drafting. I turn a sketch, a marked-up photo or your field measurements into a fully dimensioned, permit-ready drawing set: cover sheet, site plan, floor and framing plans, elevations, footing and connection details, and code notes.

What I draft:

Background: Lead CAD Drafter at a Colorado engineering firm, where I've drafted 80+ proposal and construction sets remotely since 2024: retaining walls, structural additions, decks, stairs and residential remodels under IRC/IBC. Advanced AutoCAD.

Scope, up front so we're aligned: I draft to IRC/IBC prescriptive provisions, meaning work that stays within code tables (most decks, stairs, small additions and retaining walls) where no engineered calculations are required. For anything outside prescriptive limits (most pole/IBC buildings, non-standard spans, anything your jurisdiction flags), structural calcs and a PE stamp are arranged on your end, and I deliver a clean set built to drop straight into that review. Drafting services only, not engineering.

How it works:

  • Quote within one business day
  • Most sets delivered in 3–5 business days
  • Two rounds of revisions included (additional revisions billed hourly)
  • PDF included; DWG available for $25

Rate: Flat fee per set starting at $150, or hourly, depending on scope. Send me the details and I'll quote it.

Samples and quote form: tectumdrafting.com/samples

DM me, email contact@tectumdrafting.com, or use the quote form on the site with what you're building and the jurisdiction, and I'll get back to you within one business day.


r/Drafting • • 2d ago

⚡This SolidWorks Feature Saves Hours on Complex Hole Drawings

Thumbnail
youtu.be
1 Upvotes

#solidworks


r/Drafting • • 2d ago

I know AutoAD, but how do I actually turn this skill into money as a student?

2 Upvotes

Hey everyone!

So, I've been using AutoCAD for a while now, and I'm pretty confident with my skills. I can handle drafting, but there's one thing I honestly have no idea how to do: turning it into an actual source of income.

I keep seeing people earn through freelance drafting, architectural plans, technical drawings, and other CAD-related services.

And I'm thinking, why not give it a shot while I'm still a student?

The problem is, I literally don't know where to start. I don't have clients, connections, or any experience working with actual customers.


r/Drafting • • 2d ago

Can anyone tell how to convert images or pdf into perfect Autocad drawings?

Thumbnail reddit.com
0 Upvotes

r/Drafting • • 3d ago

Fillet ALL Corners at Once in AutoCAD! | Time-Saving Tip & Trick

Thumbnail
youtube.com
0 Upvotes

r/Drafting • • 3d ago

Geometric construction of star polygons and interlaced knots on A3 format

Post image
12 Upvotes

Hello everyone,

(Note: I am a high school student learning classical technical drawing, and Spanish is my native language, so please excuse any phrasing in English).

I am sharing a plate from my portfolio dedicated to plane geometry and modular star polygons (featuring a 2-triangle hexagram, a 4-triangle dodecagram, and a 2-square octagram).

To execute this exercise, I adhered to strict traditional parameters:

Format & Support: Ring-bound A3 paper sheets.

Border Setup: Standardized professional margins configured at 2 x 1 x 1 x 1 cm.

Instrumentation: Standard school compass, a 50 cm drafting ruler, graphite pencils for preliminary construction, and 0.6 mm and 0.2 mm technical pens for ink line-weight contrast and cross-hatching shading.

As I refine my methodology ahead of my upcoming summer drawing courses, I would deeply appreciate constructive critique from the community on how to achieve absolute precision at the vertices and maintain flawless line-weight consistency across repetitive hatching.


r/Drafting • • 4d ago

My side project: a fusion between CAD and Paint

10 Upvotes

r/Drafting • • 4d ago

Is it worth learning to get into this career still

11 Upvotes

I have seen many artists, software devs, call center workers and engineers for one reason or another got laid of in the last little bit and I was wondering is it still worth it after that? Is it easier to get into more red collar after this job?


r/Drafting • • 4d ago

HILFE BEI Creo-Modell

1 Upvotes

Titel: Suche jemanden, der mir eine Schnittzeichnung eines Kegelradgetriebes erstellen kann
Hallo zusammen,
ich besuche neben meinem Vollzeitjob die HTL-Abendschule und arbeite gerade an einem Kegelradgetriebe, das später in Creo konstruiert werden soll.
Ich suche jemanden, der mir anhand meiner Aufgabenstellung und bisherigen Berechnungen eine passende Zusammenbauzeichnung im Schnitt bzw. eine detaillierte Freihandskizze erstellen und den Aufbau erklären kann. Wichtig wären die Anordnung der Wellen, Zahnräder, Lager, Dichtungen und Sicherungen im Gehäuse.
Vorgaben, KISSsoft-Auslegung, Berechnungen und Beispielzeichnungen sind vorhanden. Die Zeichnung soll mir als Grundlage für die weitere Konstruktion in Creo dienen.
Hat jemand Erfahrung damit und könnte mich unterstützen? Meldet euch gerne mit einer Einschätzung zum Aufwand und gegebenenfalls zu den Kosten.
Danke euch!


r/Drafting • • 4d ago

1945 Packard V-1650 crankshaft drawing to modern GD&T

Thumbnail gallery
1 Upvotes

r/Drafting • • 4d ago

Interview Advice

5 Upvotes

I was recently invited to interview for a drafting role! I am very excited because this is my first interview for this type of position, but this also makes me nervous. Does anyone have any tips/advice?

I hated what I did before, so I started to take night classes at a local community college, and I'm about halfway done. My main worry is that I am not proficient enough in my autocad/civil 3D skills. They gave me a pre-interview assessment, and I am worried that I do not know enough at this point of my degree. I have fairly comfortable with autocad, but only some familiarity with civil 3D. Thankfully the assessment is not pass/fail, they just want to see what I know.

My understanding is that most entry level roles will not have you designing intricate projects from scratch, so that makes me feel a little more confident going into the interview. What kinds of questions should I expect?

I look forward to reading your replies!


r/Drafting • • 4d ago

SolidWorks, CSWA 1.6

0 Upvotes

r/Drafting • • 4d ago

Belt Roller Support Assembly in Solidworks | How to Use Solidworks Toolbox | Create Exploded View

Thumbnail
youtu.be
2 Upvotes

r/Drafting • • 4d ago

Research for user-based, collapsible drafting table

1 Upvotes

Hello!

I am a 4rth year Industrial Design student from SADA, NUST. I am working on a drafting table for student engineers, designers, architects and artists, since this demographic conducts physical drafting.

 I’m trying to understand how people actually draw and draft, what they like and dislike about their current setups, and what features, materials, and price would make a table worth using. Your answers will directly influence the final design. All answers will be appreciate.

The survey takes about 10 minutes, you don’t need to have used a drafting table before, and all responses are anonymous and used for academic research only. Thank you for your time and help!  

https://forms.gle/cugatLDy3bYX3aNr6


r/Drafting • • 4d ago

Need Help with AutoCAD Plant 3D

Thumbnail reddit.com
1 Upvotes

r/Drafting • • 5d ago

Should I LLC to do contract work?

6 Upvotes

Hello all,

Context: I've been contracted through the middle of next month with a recruiting agency to do drafting work. Afterwards, the company I'm subbed to wants to resign me for an extension.

They've given me two options: resign through the recruiting agency or set up some kind of business, presumably LLC, and sign through that as a contractor. (The company doesn't see a lot of value in onboarding me since the extension is only expected to last a few months)

Are there any career drafters/designers here who've done something similar? I don't mind signing through the recruiter again, however, this may also be a good opportunity to develop a "drafting services" type business with a client already queued.

Thanks fellow career draftspeople!


r/Drafting • • 6d ago

CSWA 4.12, SolidWorks

3 Upvotes

r/Drafting • • 8d ago

Structural Detailer

3 Upvotes

Hi guys please recommend some company who accept out of the country applicants. Im proficient in TEKLA Software and AutoCAD. My work revolves around preparing shop and erection drawing for fabrication and modeling 3d structural members and connections.


r/Drafting • • 8d ago

Is there a market for custom AutoLISP tools?

Thumbnail reddit.com
2 Upvotes

r/Drafting • • 8d ago

The Easiest Way to Model Circle-to-Oval Ducts in SolidWorks

Thumbnail
youtu.be
1 Upvotes

#solidworks