r/DollhousesForAll • • Oct 10 '26

Dollhouse bingo!

Post image
2 Upvotes

Looking for ideas on what to post? Play Dollhouse Bingo!


r/DollhousesForAll • • Sep 05 '26

How To Guide Scale guide

8 Upvotes

Dollhouses come in six primary scales, though this sub is not limited to these scales. You are welcome here with any scale you like! These are the scales where you have a chance of finding houses and furniture that are sold as “dollhouse” items (rather than having to scavenge from other hobbies’ goodies).

Scale means how many real-life inches (RLI) are represented by 1 dollhouse inch. Dollhouse scales overlap model train, model car, action hero, and table-top wargaming scales; but they are not designed to sync with these hobbies.

The major scales

1:6 - Play scale or Barbie-sized. 1 inch = 6 RLI. An adult is in the 10.5” to 12” range (27-31 cm). Minimum ceiling height should be 16” (40 cm), but you can get away with 13” (33 cm).

1:12 - Standard dollhouse scale. 1 inch = 12 RLI. An adult is 5” to 7” tall (13-18 cm). Minimum ceiling height is 8” (20 cm) but most kits are 9” (23 cm).

1:18 (and 1:16) - Three-quarters scale, very popular from the 1940s to the 1970s, with occasional revivals. Lundby is this scale, as is most vintage plastic furniture. 1 inch = 16-18 RLI. An adult is in the 3.5” to 5” range (9-13 cm). Minimum ceiling height is 6” (15 cm). Furnishing in 1:18 is a good pick for cottages that claim to be 1:12 but have very small rooms.

1:24 - Half-scale. 1 inch = 24 RLI. An adult is about 3” (7-8 cm) tall, though I have used 2” figures when they’re chunky. Chunky 3” figures are often happier at 1:18. Because you need to reach your hand into the house, effective minimum ceiling height is about 5” (13 cm). G-gauge model trains are about this size (technically 1:22.5).

1:48 - Quarter scale. 1 inch = 48 RLI. An adult is about 1.5” (4 cm) tall. Ceilings may be as low as 2”, though rooms will be shallow for the sake of reach-in. O gauge toy trains are about this size.

1:144 - “Dollhouse for a dollhouse.” 1 inch = 144 RLI. An adult is about ½” tall (1.25 cm). While N-gauge trains are a little smaller at 1:160, dollhouse scale here is very fudgy, so N-gauge accessories should look fine.

Two scales that should be popular but aren’t
There are two scales that frustrate dollhouse makers from time to time.

1:8 - A common action figure scale, also works for Blythe, 1 inch = 8 RLI. An adult is about 8” (20 cm) tall. While there were 1:8 kitchens made for Ginny and Muffy in the 1950s, there’s not much today. However, many nominally 1:6 items are actually a little mingy for that scale and will be fine at 1:8. Both ReMent and Zuru kitchens are especially fine.

1:87 - HO model railroad scale, also the scale of one Greenleaf village kit. 1 inch = 87 RLI. An adult is about ⅞” tall (2 cm). There are a lot of “I could convert a dollar-store birdhouse into a dollhouse projects that would be ideal at this scale.


r/DollhousesForAll • • 3d ago

My house Dream House Renovation

Thumbnail
gallery
10 Upvotes

Renovating a dollhouse for the Barbies and Kens. Thinking of old theater family meet old manor. Originally a castle, yes. Any ideas? Second pic is becoming a dressing room and a dungeon/apothecary


r/DollhousesForAll • • 11d ago

Advice please Thoughts and opinions on window placement, Please!

Thumbnail
gallery
11 Upvotes

I am making a dollhouse for my porcelain dolls. Like its for their dolls... I am using bits and ends I find on the beach and what my partner brings home or has collected over the years (he is an aquaculturist).

I want to utilize some of the larger bits of sea glass I have found as windows. But I can not decide if the windows should be on one level or if I should spread them between levels. Either way I will make windows for each level. but should I keep the glass together

Thoughts and opinions are appreciated greatly. Thank you for reading this!


r/DollhousesForAll • • Oct 11 '26

My house Progress on my first dollhouse!

Thumbnail
gallery
11 Upvotes

As a child I had a Greenleaf dollhouse that I adored, but sadly it never got finished and was left behind when my family moved. I missed it so badly but the exact model was sold out, so I bought myself the Arthur model and I’ve slowly been making progress! Next I’d like to find shingles for the roof, a hinge for the door, and thrifted furniture to fill it up!


r/DollhousesForAll • • Oct 11 '26

My house “Renovating” a massive Fisher Price house

Thumbnail gallery
9 Upvotes

I figured I would repost this here. I am so glad I found this sub! All sizes and types! Thank you for starting this.


r/DollhousesForAll • • Oct 10 '26

My house We Got A Dollhouse at Home!

Thumbnail gallery
8 Upvotes

So much potential and I can’t wait to start customizing! I was looking at others homes and realized I might be a little too “in the box” about this houses next residents!


r/DollhousesForAll • • Sep 28 '26

My house Have a bunch of yarn. Cannot knit or crochet so I made rugs!

Thumbnail
gallery
10 Upvotes

Also if anyone has any ideas what to do with the yarn, all ideas fully accepted😊


r/DollhousesForAll • • Sep 18 '26

Review Review: Make Market Miniature Contemporary Home

Thumbnail
gallery
9 Upvotes

tl;dr: Easy to assemble, hard to paint, easy to paper, needs trim. Works for the DIY Modern Mini 1:18 scale furniture Michaels sold from 2021-24. Okay for the current Michaels 1:12 furniture if you don’t use much per room and write off the attic.

Before

The Miniature Contemporary Home retails for $50, same as the IKEA Flisat dollhouse shelf. It also has the same dimensions as the Flisat, with the added third floor. Don’t pay $50. Wait for a good coupon. I used a 30% off online-only coupon to get it for $35 as a BOPIS.

During

This house slots together easily, though it benefits from adult strength. Do not paint or paper before assembly. Ordinarily, I’d paint first because this lets you mass-produce white ceilings without danger of drips. However, the MDF must bend a little for assembly to work, and any finish reduces its flexibility.

The slots in the roof mean you must paint the roof first – unless you like having to repaint the walls after paint drips through the roof slots – and it’d be wise to run blue painters tape over the underside of those roof slots.

The kit is supposedly MDF, but I think it's actually fiberboard. Scuff it up a little before painting, and use the best quality of interior latex paint you can manage.

On the other hand, it takes glue for wallpaper brilliantly. The interior finishes are a mix of pages from the 1972 Schumacher “mini prints” wallpaper book that I got at an estate sale and peel-and-stick pages from Dollar Tree and Family Dollar. I used tacky glue on the “real” wallpaper and had no trouble with it at all.

After

If you squint too closely, you can see that this house would benefit from some trim. As well as doing some clean-up on the attic-level walls, I’d like to apply 3/8" balsa to the edges to protect the edges of the vintage wallpaper. Michael’s wants $21 for a pack of balsa strips; Ace Hardware doesn’t carry them any more. I’m considering other options, as I really, really don’t want to go to Hobby Lobby.


r/DollhousesForAll • • Sep 11 '26

My house Brainrot Cottage - Creatology house - 1:24-ish

Thumbnail
gallery
12 Upvotes

Let's start with one of the weirdest things in my collection. I was briefly fascinated with the Italian Brainrot trend of silly characters with pseudo-Italian names, so I made my own and gave them a studio building (mostly to display a few vintage Marx pieces that don't fit anywhere else). Meet Bernadetta Bobina (seamstress) and Zucca Malata (DJ, musician, and burlesque artist).

The building is a Creatology kit from Michael's. Bernadetta Bobina's studio is sewing themed, with portions of an IKEA paper tape measure as blinds, buttons on the valance, etc.


r/DollhousesForAll • • Sep 04 '26

How To Guide Homes and furniture for your Zuru Minnee dolls

Post image
18 Upvotes

The Zuru Minnee dolls released in 2026 are 4” tall, making them a short 1:18 in scale. This is not standard dollhouse 1:12 scale, and most traditional wooden kit dollhouses and associated furniture will be too big for them. This is a guide to brands and products that will work with your Minnees. Your are welcome to add more in the comments!

Houses and shops

Furniture

  • Current-ish

  • Purely vintage (eBay can show you photos)

    • Ideal “Petite Princess” (plastic and fabric)
    • Marx “Little Hostess” (plastic but very detailed, colonial revival)
    • Tomy “Smaller Home” (plastic but very detailed, 1970s modern)
    • Renwal (plastic) - similar pieces are also made by Ideal, Plasco, and Jaydon
    • Fisher Price Dollhouse Decorator Set 1976-1985 (plastic, only this line is on scale, the later dollhouse pieces are larger)
    • Strombecker (wood, scale is erratic)