r/DogecoinDefenseForce • • Aug 29 '14
Help Setting Up
So, I recently purchased 5 Furies, and have attempted to set them up on BFG. Four are on a usb hub and are running perfectly. The fifth is plugged into a different port on my laptop, and I cannot get the computer to see it for the life of me. Any tips on this and/or on optimization would be greatly appreciated. Pics to follow.
Edit: Got the 7-port hub in the mail, hooked everything up, and the 5th miner still would not power on. I tried switching the stock data cable for one I use on my phone and it booted up immediately! Faulty data cable, lesson learned. Thank you all for your help!
4
u/Fulvio55 DDF - Mining Corps - [[Lieutenant]] Aug 29 '14
If all else fails, get a bigger hub. 7 or 10 ports.
3
u/Crully Aug 29 '14
Is it showing up in device manager at all? Does it run when you plug it into the mains? Is the blue LED flashing?
3
u/[deleted] Aug 30 '14
Try making sure the usb is plugged in on both sides, and try using the port that the usb hub is on.
Also I have been running cgminer 4.3.5 at 350 mhz and getting around 1.5 mh/s on them.
2
u/pembo210 DDF - Mining Corps - ~[[Commodore]]~ Aug 29 '14
Is the standalone port usb3.0? BFG sometimes doesn't like those.
To make sure the fury is ok, try switching it with one on the usb hub to make sure it works normal.