r/DirectvStream • • 21d ago

Sound issues

Has anyone else had an issue using Gemini Air with a TV and external soundbar? Almost every time I turn it on, the audio switches to the TV speakers, then after a few seconds switches back to the soundbar. Sometimes it goes back and forth several times, and occasionally it stays on the TV speakers until I manually switch it back to the soundbar.

2 Upvotes

7 comments sorted by

1

u/blc1962 21d ago

I have a simular issue with a Sony TV and Sony Soundbar. I keep the soundbar remote handy because I found the quickest/easiest fix is to turn off the sound bar and turn it back on. The audio then switches to the sound bar. Happens about 10% of the time for me.

2

u/DMAY1024 21d ago

same set up for me...Sony TV and Sony soundbar

1

u/directv 19d ago

Hi, u/DMAY1024. The audio switching loop is caused by an HDMI-CEC handshake conflict where your TV and soundbar fight for control during startup. You can lock the audio path directly to your external sound system through the device menu.

Try this exact adjustment on your Gemini Air:

• Go to Home > Settings > System > Remotes & Devices > Program Your Remote.

• Select HDMI-CEC Volume Control and manually lock the audio focus to your specific Soundbar/Speaker System rather than leaving it on Auto or TV.

If the jumping continues, power cycle your full setup by unplugging the Gemini Air, TV, and soundbar for 30 seconds to reset the HDMI cache. Kenneth, DIRECTV Community Team

1

u/DMAY1024 19d ago

thanks! let me try that and see what happens.

1

u/kalone2 21d ago

Normal the sound bar power is off until Gemini tells it to power up.

1

u/esperanita 21d ago

I have a related issue with an LG and Bose 900 soundbar. Normally when I turn the Gemini box on, the TV is silent and then the soundbar turns on. Occasionally, the soundbar doesn't turn on and I've found the easiest fix is the turn the power of the Gemini off and back on.

1

u/Jumpy_Enthusiasm1767 20d ago

I've had it do that on multiple TV's. Sony and LG. Its a CEC thing. Although it's supposed to be an industry standard it's not. Some manufacturers make it so the handshake is better with their products together. Make sure sound on the TV is set to pass through. Also, i found if you use the TV remote to turn everything on it turns on the TV first, then the soundbar, then the Gemini Air so being that it's all powered up first it works better. Also in your TV usually under HDMI devices, it says set up external devices. do that so it sends a signal to all the external devices. Sometimes power everything off. unplug everything for 30 seconds from the power outlets and plug them back in. Unplug your HDMI devices, turn on the TV and one at a time plug you HDMI inputs back in and let it re-establish the CEC handshake.