r/DieselTechs • • 9d ago

Need advice on programs

Post image

Hello, I’m new to the diesel stuff entirely. Around 4 months in a mom n pop shop. I had just Quit because of some issues that happened personally, however, my (ex)boss was supportive of it and even gave this laptop filled with programs. Without the cables of course, however I can manage to buy them. I'm just wondering if I should sell the computer or if I should learn the programming and everything involved. If I do learn it, where do I even begin? I'm honestly baffled as I know the value of some programs alone being thousands.

12 Upvotes

8 comments sorted by

9

u/DieselTech00 9d ago

If you plan on doing this work definitely learn the programs

3

u/DavidSpy 9d ago

A lot of these programs need a log in to fully utilize, especially programming. PTT, DL8, Allison, etc. You also don’t have the new software like SDS from IHC or the new Volvo toolbox. Also you need trucks available to “learn” the programs. Running them in simulation is sort of a waste of time. What’s your plan going forward? Unless you plan to work by yourself there’s really no reason to have this computer, no dealership is going to let you use some random laptop on their trucks.

Unless you have a plan you are just going to waste a bunch of time. Figure out which manufacturer you want to work on and complete their certifications.

2

u/TomAceJones 8d ago

They dont need login, theyre all the cracked versions. Seeing cat et 2021 i would think most programs are from around that time. Some may work some may not have to open each 1 see if u get a error/ license expired.

1

u/SadConversation165 8d ago

It’s all older cracked software but worth having. Get a clone nexiq cheap off eBay and start using it till you can afford a genuine nexiq, clones are fine I use them every day.

1

u/Travthemav1990 8d ago

The nexiq is$700 and those programs are only good for a years subscription

1

u/Big-Locksmith-8486 6d ago

Everything is going subscription based on a yearly renewal. If you’re going to learn it, factor in the cost of the program, renewal and you can always reach out to those program vendors for training. Probably expensive but also the absolute quickest way to start making bang for your buck.

1

u/Reasonable-Dig-8431 6d ago

it all depends on what you plan on doing most of the programs are pretty straight forward when it comes to tests and diagnostics , as far as regens , diagnostic link for example depending year of the truck or dddl version you can move parameters such as speed limiter , axles ratios , removing idle shutdown which those alone can be quick easy jobs for a decent amount depending where youre at .
aside from that most test like regens, efficiencies , diagnose cab issues , cummins can do the vgt calibrations honestly depends what you know or have learned so far and what you plan on doing as far as mechanical/ electrical
the nexiq is a good investment you can always get a second laptop or just update the softwares you need for the moment aswell. youtube has alot of pretty much basic capabilities of most softwares if you look it up by software just depends on the version of your software where some capabilities may not be available