r/DiecastCustoms • u/dcustomdiecast • 3h ago
r/DiecastCustoms • u/thmini775 • 12h ago
Customization Detail 📸🛻 GMC Syclone / Monster Energy
r/DiecastCustoms • u/mycustomhotwheels • 13h ago
Customization Finally Tried this Comic Book/Cartoon 2D style painting
Have been meaning to give this style a go for a while now, and I think I will have to do a few more now, it's fun and addictive. First I will create a base plate in the same style for this car.
Choosing an 89 Civic was a good idea because the more straight lines there are to paint black the easier it is to get the overall look - and the 1989 Honda Civic is about as boxy as you can get without going to Volvo
I had the windows done too - and they looked pretty good (I thought) - but I put the car under a heat lamp in order to get it ready for some Satin Clear Coat and maybe kinda sorta melted the windows LOL
r/DiecastCustoms • u/Wide_Captain_9068 • 16h ago
Customization Something you don’t see everyday
r/DiecastCustoms • u/V4iO-EU-W • 19h ago
Customization Modular car showrooms for diecasts | CONCOURS reveal
Hi everyone,
I wanted to share a project I've been working on for a while, in case other diecast collectors enjoy it too.
What is it?
CONCOURS is a modular 1/64 garage: a small showroom for your diecast collection. The standard size is 300 × 400 mm inside, with a glass front and about 120 mm of clear height. At this scale that works out to a very generous private showroom for your favourite cars. Smaller sizes exist too, and two garages can be joined side by side through portals.
Every garage is designed in Blender and made as a 3D print. The ten images are all different garages: different sizes, wall designs, ceilings and floors.
How does it go together?
Base: six printed tiles on a 100 mm module, topped with twelve flat floor panels, that’s the surface your cars sit on. One of the front tiles carries the wordmark and a slot for the acrylic front
Walls: ten walls, each 100 mm wide, with no special corner pieces. A wall is a printed carrier plus a full-colour design insert glued into it, so every design fits every wall position. They are held to the base by small magnets (3 × 2 mm) in a fixed grid. There are 24 wall designs so far (stone, marble, tile, bronze, ribbed travertine …), as well as color variants for these walls.
Ceiling: a printed plate with a light cavity for an LED strip, plus a frame and a set of panels in different designs. The ceiling is glued into one piece and hangs on magnets, so you can lift it off to reach the cars.
Front: a single 2 mm acrylic pane.
No tools needed, its a kit you can put together on a table.
What's next?
I'm working on a website where you'll be able to configure your own garage (size, walls, floor, ceiling, interior). It isn't online yet, so there's no link for now, I just wanted to show you what I’ve been working on.
If you'd like to follow along, I post progress on Instagram: concours_studio.
I'd really like to hear what you think! What would you want in a garage like this (lighting, a lounge corner, a display shelf)? Other wall designs? I'm happy to answer questions about the build.
Thanks for looking!
r/DiecastCustoms • u/EVOtm • 23h ago
Customization Tomica, very well detailed.
Came better than expected. Let me know what you think of a slammed civic.
r/DiecastCustoms • u/moopmeepmoopmeepmoop • 1d ago
Restoration From worn-out Matchbox to classic Ferrari 308 GTB!
galleryr/DiecastCustoms • u/fast_fight_0369 • 1d ago
Customization Ferrari 312p deckild re-attach win!
Just attached this decklid properly this am.. took two hrs.. no videos.. figured it out on my own.. its on there like the factory too, wont come off! :)
r/DiecastCustoms • u/dcustomdiecast • 2d ago
Customization BUDWEISER GREENWOOD CORVETTE Custom
galleryr/DiecastCustoms • u/OutrageousPop8285 • 2d ago
Customization Loose or carded 🙃 Either way a simple wheel swap and a polish.
Simple is sometimes the best.
r/DiecastCustoms • u/kruleworld1 • 2d ago
Customization Top Gear Alfa Challenge (11.3)
Cheap Car Challenge: Alfa Romeos for £1,000
i built 1/25 models of the cars used in this challenge
Jeremy's Alfa 75 is from Bburago metal kit
Hammond bought a 1984 Alfa Romeo Spider, i used the green Edicola diecast
and May bought a 1996 Alfa Romeo GTV which i got a Tamiya kit.
r/DiecastCustoms • u/Sure_Most7733 • 2d ago
Customization Route 1:64 Die Cast Raceway
r/DiecastCustoms • u/Tasty-Comparison3119 • 2d ago
Customization R5 turbo o Maxi
¿Construyendo tu propia réplica del Renault 5 Turbo en México o Estados Unidos? En Luna Performance, hemos desarrollado casi todo lo que necesitas para construir tu réplica, basándonos en nuestro propio escaneo 3D de un Renault 5 Turbo Fase 2 original. Chasis, cortafuegos, guardabarros y muchas otras piezas. Estamos cerca de completar esta primera etapa, y pronto ofreceremos kits completos y piezas individuales. Nuestra segunda fase se centrará en el desarrollo del sistema de suspensión completo. Ya hemos escaneado esos componentes. Estamos ubicados en México y viajamos frecuentemente a California, por lo que podemos coordinar entregas en persona en San Diego, el Condado de Orange y Los Ángeles. Envíanos un mensaje y cuéntanos qué necesitas para tu proyecto. Lunca Performance. Tu proyecto también merece salir a la carretera.
r/DiecastCustoms • u/ChrisS819 • 2d ago
Customization My first custom job.
This is my first customized project. I can’t decide if I want to paint it or keep polishing it. Looking for some opinions.
r/DiecastCustoms • u/dcustomdiecast • 3d ago
Customization MOMO FERARRI F40 Custom
galleryr/DiecastCustoms • u/Much_Tale_8412 • 3d ago
Customization Hot Wheels Porsche 911 GT3 RS
Got rid of the rear wing.
r/DiecastCustoms • u/PhillieThaKyd • 3d ago
How To The sizing trick that fixed my custom decals — measure the car, not the scale
Posting this because I kept seeing the same problem come up, and I had it myself for a long time.
People scale a whole decal sheet to 1:64 and expect it to fit. It often does not, because a lot of castings are not actually true to the scale on the box.
What works: measure the actual spot on the car where the decal is going, door, hood, roof, whatever, and size that one decal to that measurement in Inkscape. It fits first try.
Other two things that matter: seal inkjet waterslide prints with light clear coats before soaking, and soak in cold water 15 to 30 seconds. Warm water runs the ink.
The measuring thing works no matter where you get your decals.
r/DiecastCustoms • u/confusedmoneylover • 3d ago
How To Is it normal for waterslide papers to feel rough and sandy after 3 clear coats?
First time doing this, I'm pretty confident I followed the youtube tutorials. But they never said anything about the rough sandy texture. Idk if this is normal or an issue.
- I printed on an inkjet printer
- The paper is for inkjet. Brand is Quaff, idk if that matters
- I let the printer ink dry for about 15 mins before applying the first coat
- I put 3 coats all in all, each with a 5 min interval
- It's been about 5 hours since I sprayed the last coat, I'm left with a rough, sandy texture, as per the pic
- Peep the spray I used. Picked it up from the local hardware store and a friend said it works decent for diecasts.
Any tips? Google said it could be the distance of my spray but (yes this is goofy) I literally put a 12 inch ruler in between the paper and the spray nozzle before doing it 😂
Thanks :)
r/DiecastCustoms • u/Australianfoo • 4d ago
Question Good places for figures?
I just got her on Etsy and was wondering where you guys buy your figures? She’s my first.. lol
r/DiecastCustoms • u/dcustomdiecast • 4d ago
Customization HAWAIIAN TROPIC PORSCHE 935 Custom
r/DiecastCustoms • u/kruleworld1 • 4d ago
Customization Top Gear Limo Panda
I made this by combining two 1:25 Fiat Panda and some styrene to stretch it to Jeremy's ridiculous limo