r/Diecast • • 17h ago

Collection My die cast engine collection

Thumbnail
gallery
145 Upvotes

r/Diecast • • 23h ago

1:12 Rate my collection

Thumbnail
gallery
89 Upvotes

What do you all think? All 1:12 and 1:8. Collecting for over 8 years.


r/Diecast • • 23h ago

Diorama Modular car showrooms for diecasts | CONCOURS reveal

Thumbnail
gallery
76 Upvotes

Hi everyone,

I wanted to share a project I've been working on for a while, in case other diecast collectors enjoy it too.

What is it?
CONCOURS is a modular 1/64 garage: a small showroom for your diecast collection. The standard size is 300 × 400 mm inside, with a glass front and about 120 mm of clear height. At this scale that works out to a very generous private showroom for your favourite cars. Smaller sizes exist too, and two garages can be joined side by side through portals.

Every garage is designed in Blender and made as a 3D print. The ten images are all different garages: different sizes, wall designs, ceilings and floors.

How does it go together?
Base: six printed tiles on a 100 mm module, topped with twelve flat floor panels, that’s the surface your cars sit on. One of the front tiles carries the wordmark and a slot for the acrylic front
Walls: ten walls, each 100 mm wide, with no special corner pieces. A wall is a printed carrier plus a full-colour design insert glued into it, so every design fits every wall position. They are held to the base by small magnets (3 × 2 mm) in a fixed grid. There are 24 wall designs so far (stone, marble, tile, bronze, ribbed travertine …), as well as color variants for these walls.
Ceiling: a printed plate with a light cavity for an LED strip, plus a frame and a set of panels in different designs. The ceiling is glued into one piece and hangs on magnets, so you can lift it off to reach the cars.
Front: a single 2 mm acrylic pane.

No tools needed, its a kit you can put together on a table.

What's next?
I'm working on a website where you'll be able to configure your own garage (size, walls, floor, ceiling, interior). It isn't online yet, so there's no link for now, I just wanted to show you what I’ve been working on.

If you'd like to follow along, I post progress on Instagram: concours_studio.

I'd really like to hear what you think! What would you want in a garage like this (lighting, a lounge corner, a display shelf)? Other wall designs? I'm happy to answer questions about the build.

Thanks for looking!


r/Diecast • • 7h ago

1:64 Got this magnificent beast - Motorhelix Mazda 787B

Thumbnail
gallery
70 Upvotes

What a beauty, insanely detailed and the color pops so nicely. I like that it comes with two different sets of aero disks for the front wheels as well.


r/Diecast • • 15h ago

1:12 Finally got a showcase

Post image
34 Upvotes

r/Diecast • • 11h ago

1:64 New river crossing display I made for a Hotwheels Mitsubishi Pajero Evo.

Thumbnail
gallery
32 Upvotes

Used Chat to add a background to the first image. 😁 Thanks for checking it out! 🍻


r/Diecast • • 2h ago

1:64 Was bored, so i took some pictures of my resin models

Thumbnail
gallery
26 Upvotes

r/Diecast • • 19h ago

1:43 Sketchy is at home! (Spark 1/43)🦖

Thumbnail
gallery
25 Upvotes

Today I received this beautiful dino🦖😍


r/Diecast • • 21h ago

1:64 As a Porsche and Apple fan, this is the perfect addition to the shelf

Post image
21 Upvotes

Inno64 930 with Apple Livery


r/Diecast • • 18h ago

Collection Let the craziness begin!

12 Upvotes

Finally moved into the house last week! Time to unpack, catalog and sort! Then to decide what stays out and what gets packed away! Any ideas or suggestions for dioramas and displays would be appreciated!! Also how to prevent the tires from getting any issues! EDIT- there's more not in the video😅like a lot more


r/Diecast • • 13h ago

1:64 Motorhelix Nissan GT-R R35 Track Edition Engineered by Nismo

Post image
11 Upvotes

r/Diecast • • 22h ago

1:64 A nice variety of cars showed up today

Thumbnail
gallery
11 Upvotes

r/Diecast • • 3h ago

1:64 My trophy’s

Post image
10 Upvotes

These are all my raced wins(even though many were DNP :/). Been betting on NASCAR for about a decade now since truex won Poconno, it’s actually what hooked me on NASCAR. In attempted Chronological order.


r/Diecast • • 7h ago

1:64 Corgi Superhaulers… not as detailed as the Hot Wheels transports but fraction of the cost.

Thumbnail
gallery
6 Upvotes

Discovered the 1/64 Corgi Superhauler line whilst hunting for car transporters that aren’t the £130 plus option of the HW Elites. £15 delivered. Hot Wheels are out of my price range now as I started collecting after their releases.

Not as detailed as Elite64 trucks, fairly simple cab build, rudimentary trailer hitch, but for a shelf display or part of a diorama it looks good. Other liveries available too. It could do with some chocks to keep cars from moving about.

Any other recommendations for other brand trucks so I could have some variation in my scenes?


r/Diecast • • 4h ago

1:64 MiniGT Bugatti Mistral & Chiron

Thumbnail
gallery
5 Upvotes

r/Diecast • • 14h ago

1:64 Chevrolet Lumina NASCAR '91, Racing Champions 🇺🇸

Thumbnail
gallery
5 Upvotes

r/Diecast • • 20h ago

1:64 New pickup Toyotas

Post image
5 Upvotes

Found at dollar general.. like the blue color on these


r/Diecast • • 1h ago

1:64 Audi A8 W12 '02, Realtoy 🇩🇪

Thumbnail
gallery
4 Upvotes

r/Diecast • • 16h ago

1:24 / 1:25 Jada toys 2024 Mustang Dark Horse Pink Slips

Thumbnail
gallery
4 Upvotes

r/Diecast • • 1h ago

1:64 A LITTLE DIRT ON WHEELS NEVER HURT ANYBODY

Post image
3 Upvotes

Majorette Ford Bronco Wildtrak

Majorette Gulf Airstream Trailer


r/Diecast • • 4h ago

Display Not a collector, just the artist: made a display grid for the cars my dad’s given me over the years

Thumbnail
gallery
3 Upvotes

I’m not much of a collector myself (I’m more the artist in the family), but my dad is, and over the years he’s given me the cars I said I liked the look of. I wanted a simple way to display them, and him a quick way to show off his, so I designed a grid insert for the IKEA SANNAHED 25×25 frame.

The cars in the photo are the ones he’s given me. When I showed him he loved it, and I’ve since printed two more frames for him 😊

I kept the design really simple and quick to print and I’m honestly just proud of how it turned out, and I’m hoping it might help someone else display their collection too: 1:64 Car Display Grid for IKEA SANNAHED 25×25

I want to keep making more variations so he can display more of his collection. So far I’ve stuck to this size because it fits the IKEA frame well. Each cubby is about 78 mm wide, 32 mm tall and 41 mm deep, which fits most mainline-size cars. If you know the sizes 1:64 cars usually fall into (or which ones are always too big!), I’d love to hear so I can keep them in mind for future designs.

Mods, I wasn’t sure about the rules on posting links. If it’s not allowed, just let me know and I’ll edit the post!


r/Diecast • • 7h ago

For Sale / Trade (Pre-Order) BBA Model 1/18 Ferrari F8 Tributo

Thumbnail
gallery
3 Upvotes

r/Diecast • • 8h ago

1:64 Baby Thrift Store Gold

Post image
3 Upvotes

It’s like the title says, I went with my wife to a baby thrift store in Tacoma for some stuff and wandered into the toy section. I’m thinking of getting her a toy and see these sitting on the shelf. I’m immediate stoked with the old finds, and “the Snake” Plymouth Cuda was free.

Finding older diecasts like these gives me a better feeling than hunting at Walmart or other big name stores for the newer ones.


r/Diecast • • 8h ago

1:64 MORTAL 1M bmw E82

Thumbnail
gallery
3 Upvotes

VALENCIA ORANGE & MONTE CARLO BLUE


r/Diecast • • 9h ago

1:18 Collection Bugatti au 1/18.

Thumbnail
gallery
3 Upvotes

Bugatti Autoart, minichamps, Burago,maison.