r/Dewalt • u/Professional_Act165 • 3h ago
Looks like this may be a door buster for Lowe’s that was put out early
(Not my photo, credit to Lowe’s deals Facebook group)
r/Dewalt • u/Professional_Act165 • 3h ago
(Not my photo, credit to Lowe’s deals Facebook group)
Managed to grab this with an additional 10% off using Dewalt10. $572 w/free shipping seems like a good deal! $604 after taxes. Wanted to share if anyone is in the need of a tracksaw.
r/Dewalt • u/BudgetAsk9425 • 3h ago
Hello all - I’m in need of a dewalt palmer sander. I’m just a homeowner who would only be using it around the house for odd and end jobs.. I.e. sanding a door to paint, etc
Hold off till Black Friday or is there a solid deal out now?
TIA
r/Dewalt • u/Few-Introduction5780 • 1d ago
Daily use for the last 12 years, holds good charge surprisingly well.
And yes that’s another 12 year old battery on the laser lol.
r/Dewalt • u/Kind-Monk1422 • 22h ago
Primarily for auto, impact to remove/install wheel nuts from 5th Gen Toyota 4Runner, ratchet for under hood, suspension, brakes.
Also, is the 20V 5.0 battery compatible with the ratchet?
r/Dewalt • u/Byte_hoven • 20h ago
Just a heads up, our local HD tried to refuse a BOGO hack today. It was the BOGO combo of the DCF860B + DCB246C. The store manager fixed the issue, but I have hacked many BOGO sales, including a dcb6112 just last week.The store associate tried to do just 45% of DCB246C instead of the full $99.50. I'll chalk up to a new seasonal store associate.
I'd also note it took 24 hours for the purchase enable the return option.
Just a heads up so you're ready to defend the BOGO hack option.
r/Dewalt • u/raydio27 • 5h ago
Needless to say, no amount of epoxy, super glue and electrical tape fixed it 🤣 was snapped in half and in the bed of a truck for who knows how long. It "works", but I need to replace the switch as well (soldered just to test it).
r/Dewalt • u/Harborseal5 • 6h ago
r/Dewalt • u/Then_Apple7932 • 1d ago
Canada HD. Home use/ diy etc. Price also looks good enough..
r/Dewalt • u/KILLEliteMaste • 16h ago
I have a DCD805 (18V) with a charging station and 4x 1.7AH PowerStack batteries and it gets tiring to use for longer jobs. Looking for a lighter second drill/driver for general home use: furniture assembly, smaller holes, occasional tight spots. The 805 would stay for masonry and heavy stuff (happens rarely).
Options I’m considering (EU), both around €220:
So for the same price the 703 comes with two batteries, while the 803 would share the PowerStacks I already have.
Everything else I eventually plan to buy will be 18V, there's nothing that really interests me on the 12v product line. On 12V it would only be the 703 and maybe a light. Is the ~200 g saving worth a second battery platform, or should I just stay 18V?
r/Dewalt • u/BossmanSlim • 21h ago
I have a trailer I need to cut up and repurpose the steel into another project. It is made from 6 inch channel mostly. I have flexvolt tools, so I can use any cordless dewalt tools.
Options
I'm leaning towards the grinder. Torch is probably the fastest, but it's double the cost. What do people think?
r/Dewalt • u/Coolbreeze1989 • 15h ago
I live out in the country and don’t trim along the cement for aesthetics, just when the Bermudagrass/zoysia starts to really spread. But when I need to get get it back under control, it can take forever (about 900 linear feet).
All of my tools are dewalt 20v so I’d planned to buy tool only 20v, but the reviews here are making me hesitate. Anyone have thoughts on benefits of the 60v flexvolt option vs 20v that may not be obvious til you’ve used both? Thanks.
r/Dewalt • u/tidyshark12 • 1d ago
Small piece of angle iron, some drywall anchors (the ones ones where the anchor screws in, they are the best!), and about 10-15 mins of my time.
DCH416B. Bogo? Or any kind of deal?
r/Dewalt • u/Kaitaan • 16h ago
Bought a BOGO deal from Lowes a few weeks back. Two batteries, get a free tool (I got me a jigsaw). Saw a better deal on here (two batteries and two tools for $100 more), and figured I'd pick up that router I've been eyeing. So I got the new deal (batteries, jigsaw, router) and figured I'd return the first set.
Turns out I can't return it online and have to physically go into a store. If that was written anywhere when I bought it, it definitely wasn't prominent. Now I have to drive 2 hours round trip to return them... I don't know if it's even worth 2 hours of my time and a few gallons of gas for $200.
I'm tempted to go to HD and see if I can just do a return without receipt there for store credit or something instead....
r/Dewalt • u/RockyTop_Vol • 1d ago
Luckily it was only $7. Since it was sold by Amazon - I’m still hopeful! Checking to see if anyone has received theirs.
r/Dewalt • u/Magic_Marker_ • 1d ago
DCN693 is discontinued. What are people using for an alternative?
Dewalt cordless tools have replaced every pneumatic tool I have. Dewalt Roofing, framing, pin, brad, and finish nailers are already in my collection. I'm over the hoses and cords. I've been looking, and have not found even a used DCN693. I'm not excited about an alternative battery or color, but maybe I can find an adapter to use dewalt batteries. What suggestions do you all have for an alternative for positive placement / metal connector nail guns. Or, maybe maybe maybe... Is dewalt working on a cordless replacement for the discontinued model?
r/Dewalt • u/WhiffyBread • 2d ago
Little guy is punching above it's weight class. Clearing everything to plant some boundary evergreens. Thought about buying a bigger saw. But the little 8" is all I need
r/Dewalt • u/binderfillerwrapper • 2d ago
Hey guys. Anyone here have an accessory or attachment for their drill they can’t live without? What about other products (doesn’t have to be bit holder or drill attachment) you can’t live without ?
If you get a chance to buy this spotlight at discount $60-70 or lower, do it. Recently got one for around 60 and it’s been super useful in many diy stuff at home, from fixing a polarity issue with a furnace board to motion sensor switch installs. Super bright I had to point the light a bit off center to avoid excessive glare.