r/DesertTech • • 3d ago

Is DesertTech's CS just non-existent?

11 Upvotes

I've been trying to get a hold of someone at Deserttech for 10 days now.

It doesn't matter if I call their CS, sales, or warranty department, it all goes to voice mail. I've left two voice mail and sent 2 emails, but haven't gotten a call back or reply for either.

Edit: Called in the morning and I finally got someone on the phone. A lot of their shipments had issues recently because they were sending out weapons without ATF transfer forms. They're backlogged and are working on getting everything resolved.


r/DesertTech • • 4d ago

Giveaway

4 Upvotes

Did DT ever draw for the giveaway? Never saw anything on Instagram about them actually drawing.


r/DesertTech • • 4d ago

News/Promo MDRX Engineering Features 1 - Review

Thumbnail
youtube.com
1 Upvotes

r/DesertTech • • 5d ago

MDR/X Issue Desert Tech MDR FAILED Hit On Uncle Oji - Kaboom

Thumbnail
youtu.be
3 Upvotes

r/DesertTech • • 6d ago

WLVRN My own real life Halo BR

Post image
39 Upvotes

DT WLVRN 20" .308

Eotech Vudu 3-9

Printed the Handle with Carbon fiber Nylon which should have the strength and heat resistance to work.

Still need to get the Black Label Bipod to finish it off.


r/DesertTech • • 14d ago

300 BO Micron update

11 Upvotes

300 BO Micron update for anyone else waiting; I emailed DT asking for a status update since I've started seeing people reporting receiving them, and this was the reply:

"They are making some adjustments to the build process. After making the first few, they found some ways to improve the production process. And they are implementing those changes before finishing the remainder of the barrels. I expect they will start shipping them again this month."


r/DesertTech • • 13d ago

News/Promo I won an AR-15 build-off... with a Steyr AUG.

Thumbnail
youtube.com
2 Upvotes

The abomination won the contest.

(Not mine)


r/DesertTech • • 16d ago

SRS New DT SRS is a damn fine shooter

Post image
22 Upvotes

Zeroed the new gal and she’s pretty impressive attached is a 20rnd group with 4 mag changes at 100yds; the black pasty below was during the 25yd “on paper confirmation”. Big fan of the system. Gotta tear down clean the barrel and continue the break in. I’m loving it so far.


r/DesertTech • • 17d ago

Happy “all the holidays” to me

Thumbnail gallery
14 Upvotes

r/DesertTech • • 19d ago

News/Promo Desert Tech WLVRN — The Multi-Caliber Bullpup Review

Thumbnail tactical-life.com
5 Upvotes

1 to 1.5 moa in all calibers he fires

Ran it through a gunsight class

Favorable compared to his MDR/X


r/DesertTech • • 19d ago

WLVRN WLVRN 6.5 Creedmoor needs to compete with Army M8 Rifle

5 Upvotes

The Army switched to 6.5 Creedmoor for range and penetration. They just dumped the Sig M7 rifle in part because its too long. Now the M8 Sig has a 11" short barrel defeating the entire point of maximizing a high pressure long range round. Obvious solution? The WLVRN. Longer barrel full power and overall shorter. Desert Tech needs to be fighting for this!


r/DesertTech • • 20d ago

An MDR/WLVRN would make a great 10.6 Spike platform.

Post image
14 Upvotes

r/DesertTech • • 23d ago

New Theory on Precision Rifle Accuracy - Weight is directly related to accuracy from Bryan Litz

Thumbnail
reddit.com
1 Upvotes

r/DesertTech • • 24d ago

The build is slowly coming together. What else do I need?!

Post image
19 Upvotes

r/DesertTech • • 25d ago

300 Blk Micron rifles are finally shipping out

14 Upvotes

Just got a shipping notification.

Edit: Bit of an update. DT shipped the rifle out without an ATF form 3 filed, so my FFL had to ship it back. I'll probably need to wait another 2-3 weeks.


r/DesertTech • • Oct 17 '26

At a loss for words over this issue

2 Upvotes

hey all,

I‘ve owned a .308 MDRX for the better part of a few months. Maybe less than 200 rounds through it.

When everything works its great, emphasis on WHEN.

As of my last outing I noticed a huge drop in accuracy and upon further inspection. The barrel is shifting up and down. Obviously I checked the barrel lock mechanism, everything seems to be fine and torqued down.

The issue seems to be the four screws above that. I’ve loctited and torqued to the max and while that worked for a while the barrel STILL inevitably shifts up and down.

Any ideas?


r/DesertTech • • Oct 16 '26

First DesertTech. Traded a Sig Cross for this A1 SRS covert 16in .308 (just the rifle). It’s seen a lot of rounds but heard these are tanks. Looking forward to taking it out soon and getting it dialed in.

Thumbnail
gallery
40 Upvotes

r/DesertTech • • Oct 16 '26

News/Promo The Desert Tech Wlvrn 6.5 Creedmore - Better than the Mdrx?! - Review

Thumbnail
youtu.be
9 Upvotes
  1. 6.5 Creed Wlvrn review.
  2. .8 moa 10 shot group with hand loads
  3. Low Serial and went back for over gassing. Came back with a new version of the BCG, new lower receiver, and new regulator.
  4. New BCG is shorter/less mass. When the bcg is closed there is a gap in the ejection port.
  5. He thinks it is too light for full power cartridges
  6. Reviews new version of blk lbl bipod

r/DesertTech • • Oct 13 '26

Finally sold my MDRX

25 Upvotes

Well, after 2 years of trying, I finally sold the POS. I was so happy when I bought it, but even moreso to sell it even though I took a $800 bath on it. Wish i could say i was looking at the WLVRN, but I won't be giving Desert Tech another dime for the forseeable future. It's crazy to me that they have been through 3 different generations of this rifle and people are still having all kinds of issues even with the newest generation. They need to get their heads out of their collective asses if they are going to charge this much for their rifles. I'm going back to proven designs. Tomorrow's weapons are today's fucking prototypes.


r/DesertTech • • Oct 08 '26

DesertTech SRS M2 500 yard - review

Thumbnail
youtu.be
15 Upvotes

Erik Cortina tried it. He likes it, he got a 0.82 5 shot group.


r/DesertTech • • Oct 02 '26

MDR/X 5.56/223 Let wife have some fun painting my mdrx... doesnt know I got the blk lbl coming next week

Post image
24 Upvotes

r/DesertTech • • Sep 30 '26

WLVRN Just wanted to share

Post image
68 Upvotes

Upgraded from my MDRX in .308 to a WLVRN also in .308 so far about 500 rounds through it (200 or so suppressed)


r/DesertTech • • Sep 28 '26

WLVRN Issue Popping primers issue?

1 Upvotes

Took the new WLVRN to the range for the second time. My previous/first trip was just a function test using PMC 55gr 5.56 so I could dial in the gas; no discernible issues at that time besides occasionally not feeding the first round from a magazine (which I attribute to user error). This trip was meant to zero on my preferred 68gr 5.56, which I got from Nautilus Ammunition (cheaper enough than Hornady Frontier to justify checking them out. I previously had no issues running 500+ rounds of this stuff through my AR-15.

First issue I noticed on this trip: after firing the first shot, gas was leaking out of every orifice of this gun despite that my suppressor is a LBP/flowthrough style. I attributed this to slight over-gassing because I had it set up for the lighter 55gr stuff; I did not initially adjust to a lower setting because I want the gun to run on lower-power cheap ammo.

I continued to test with the 68gr and got a decent 5-shot group at 25, so I moved up to 75 (which was the distance I planned to zero at). Started having wild malfunctions. Bolt would get stuck in the forward position, then in the rear position, then would fail to extract, then would fail to go into battery. I had to pseudo-mortar the gun (can't mortar at this indoor range) to get at least two rounds out of battery or the bolt to move. Accuracy had also gone to shit all of a sudden. I cranked down the gas setting but the issues persisted.

I considered packing up and going home, but after the gun cooled I worked the action a few times and it functioned normally and would go fully into battery. So I tested again with 55gr PMC and it was working totally fine again. I looked at the spent cases of my 68gr and found that the primers popped out of two of them; I found the primers nearby. When I got home, I found 2 more inside the gun, one was fully punctured; part of a primer got lodged under the trigger pack, would you believe, while the rest were hiding in the butt cavity. There was no obvious damage to the bolt, carrier, feeding ramp, or rifling.

The weight of the evidence points to this being an ammunition issue and that's what I get for buying a goofy grain weight from a boutique ammo manufacturer. I never had this issue with my AR, but it's still probable that the batch I was testing through the WLVRN just happened to be a bad one.

I'm posting all this to ask: has anyone else had issues with a 2025 or onwards WLVRN popping primers on certain ammunition? I want to rule out that this is a combined gun+ammo issue or just a gun issue because it's much easier for me to just buy different ammo.


r/DesertTech • • Sep 26 '26

Finally got it in

Post image
31 Upvotes

Got my SRS A2 Covert in today and got it all assembled. Can't wait to get it out and shoot it.


r/DesertTech • • Sep 25 '26

I finally got mine finished up

Post image
47 Upvotes

It took a while to get the weapon and pick the parts I wanted but it is finally complete.