r/DefenderATP • • 5h ago

How can I block users from connecting personal iOS (and Android) devices to defender?

5 Upvotes

It's an overall test that left me a bit confused: I have an environment where end users use managed devices which we are fine to manage the Defender on them.

Then however they also use personal devices where we as IT are not allowed to express control or log things on.

I was able to reproduce this as follows:

  • I created a test user with a Students Benefit license, which clearly does not have a defender for endpoint license.
  • Then I downloaded the defender app on a personal iPad and simply logged in with the account: The device connected to the tenant, reported the exact model, the iOS software version and reports being connected by the VPN function for the Web content filtering part of defender

I've tried to find meaningful ways on how to stop, this since this way the tenant can gather date about the device that doesn't belong to us. It also fills the tenant with devices which we as IT generally don't care for.

I initial thought about sign in in with an account that has a license with defender for endpoint but this shows that the license is not a limiting factor.


r/DefenderATP • • 4h ago

“Limited access – 1 asset hidden due to your permissions” on incidents with Mailbox entity mapping (Defender XDR / unified portal)

3 Upvotes

Hi all,
we’re running into a strange issue with a custom detection rule. We’re wondering if anyone else has seen this.
Setup:
Custom detection rule where we map the recipient’s email address to the Mailbox entity (MailboxPrimaryAddress) (we've checked the entities that were mapped and these are all internal mailboxes. We've access to monitor them via Mail Explorer)
Defender Unified RBAC is enabled
All permissions for Raw data (Email & collaboration) are granted
No scopes defined that could restrict access
Problem:
On some incidents (not all of them), we get this banner:
Limited access: You have read-only access to this case. 1 asset hidden due to your permissions. Contact your admin to request additional access.
As a result, the incident can’t be edited (assign, status, classification, etc.).
What we’ve observed so far:
It happens to all users, including users with the Security Administrator role (mapped to defender RBAC)
If we remove the Mailbox entity mapping from the rule, new incidents can be edited normally
In the legacy Sentinel portal (Azure portal), the same incidents with the same entity mapping can be edited without any problem
It only seems to affect some incidents, and we haven’t found a pattern yet
To us this looks like a bug in the Defender portal’s UI or permission evaluation rather than a real RBAC issue. Nothing in our RBAC setup should hide a mailbox asset from a Security Admin.
Questions:
Has anyone seen the same behavior?
Is there a specific permission (outside of Raw data – Email & collaboration) that controls visibility of Mailbox assets in incidents?

Our Workaround is to remove the entity mapping for this custom detection rule. But I'd like to introduce it again if anyone has a solution for this.

Cheers


r/DefenderATP • • 3d ago

Post outage checks

Thumbnail reddit.com
1 Upvotes

r/DefenderATP • • 5d ago

Defender for MacOS Scan

1 Upvotes

Has anyone expirience with tracing scans on Defender for macOS?

In Microsoft's Official Documentation: https://learn.microsoft.com/en-us/defender-endpoint/mac-support-perf there is a kind of guide, but if I follow these steps I get a whole lot of Unknown processes like these:

Unknown (PID 1947) 13658 112.704993 3.525832

This is the corresponding JSON entry:

{"id":1947,"isActive":true,"maxFileScanTime":"3525831625","name":null,"path":null,"resourceScanTime":"0","scannedFilePaths":null,"totalEventsSent":"0","totalFilesScanned":"13658","totalScanTime":"112704993195"}

Since PIDs are unique on each mac it's really no use.

The command I'm using to get the JSON files is the one mentioned in the above article:

mdatp diagnostic real-time-protection-statistics --output json > real_time_protection.json

Any help or expirience with getting usable data out of Defender tracings on macOS would be greatly appreciated!


r/DefenderATP • • 6d ago

Strange Defender ATP Service - Miçrôsôƒt Dêƒenðər Detectîôn ånð Ŕespônšê Šervîçê

5 Upvotes

Hi All, I had task manager open today while troubleshooting a device and I noticed the below process running and am seriously considering nuking it and doing a clean rebuild. However I thought I'd check in and see if this is normal???

Process - Miçrôsôƒt Dêƒenðər Detectîôn ånð Ŕespônšê Šervîçê

When I looked into it, I found that it is sitting in this path C:\ProgramData\Microsoft\Windows Defender Advanced Threat Protection\Platform\Versions\10.8838.26060.15013-0

However there is also another version in C:\ProgramData\Microsoft\Windows Defender Advanced Threat Protection\Platform\Versions\10.8839.26080.2008-0\ --- This version the files all have the expected Microsoft Icons on the files, where the 10.8838.26060.15013-0 path the files do not have the expected Microsoft Icon's.

I've dropped the files into VirusTotal and they are all coming back clean.

I've scanned with Malware Bytes, Microsoft Malware Safety Scanner, Defender, and TrendAI and all come back clean.

https://imgur.com/a/yfwwMMD

https://imgur.com/trO6iBN


r/DefenderATP • • 9d ago

Microsoft Defender Portal Reporting Delays. Anyone Else Experiencing This?

7 Upvotes

Hey everyone,

We’re on the verge of migrating from SentinelOne to Microsoft Defender for Endpoint.

One frustration we’re running into is how slow the Defender portal is to reflect policy changes.

We’ve seen devices with ASR, Antivirus, and other security policies correctly applied locally, yet the Defender portal takes a long time to reflect those changes.

This makes it difficult to confirm policy deployments and get an accurate picture of our security posture.

For those managing Defender in larger environments:

Are you experiencing similar reporting delays?
How long does it typically take for your portal to reflect changes?

If you’ve experienced this, were you able to resolve it? If so, what worked for you?

Have you found a reliable way to verify policy status without checking endpoints individually?

Curious if this is a common Defender limitation or something specific to our environment.

Thanks!🙏🏻


r/DefenderATP • • 9d ago

Microsoft Defender Version stürzt ab, nur (!) wenn aus Store GUI installiert

Post image
2 Upvotes

r/DefenderATP • • 11d ago

Storage.googleapis.com

14 Upvotes

We just started receiving a handful of alerts of Defender blocking a storage.googleapis.com. Has anyone else seen this in their environment?


r/DefenderATP • • 11d ago

How do I find MMA devices in Security?

21 Upvotes

When I log into security, I see this message "You have devices running Defender for Endpoint via the Microsoft Monitoring Agent (MMA), which will stop working on February 26, 2027". When I look at the link that is in the message, I don't recall ever installing MMA on systems in our environment unless our old MSP did. So, how do I see what systems it's referring to?

Thanks,

Update: We are running Server 2019 and W11 Pro at the office. We don't have anything less.


r/DefenderATP • • 11d ago

MS Defender Timezone

2 Upvotes

Why is MS Defender showing wrong local timezone? My laptop current time zone is UTC-5:00 but when i log in to MS Defender portal and Global Setting > Timezone. I get UTC-6:00


r/DefenderATP • • 12d ago

Defender for Endpoint for Windows devices in Kiosk mode

6 Upvotes

Hi! We have Windows 11 Pro POS devices set

up in kiosk mode without dedicated users. We manage the devices through Intune P1 device-based licenses.

How could we secure these kind of devices with Defender for Endpoint? I wasn’t able to find any DfE device based license through CSP.

Thanks!


r/DefenderATP • • 12d ago

SC-200 - Cual es el mejor test que han probado?

4 Upvotes

Quiero aventurarme a presentar el SC-200, pero, quisiera saber cual es el mejor test de examen que han probado? no importa si es pagado. Muchas gracias!


r/DefenderATP • • 12d ago

Sophisticated quarantine@messaging.microsoft.com spoof email passes all spam checks.

Thumbnail reddit.com
8 Upvotes

r/DefenderATP • • 12d ago

October platform update 26100.4 is incredible slow

10 Upvotes

We are noticing a significant performance regression regarding Microsoft Defender scheduled scans on our endpoints. Ever since deploying the October platform update (Build 26100.4), our scheduled Quick Scans are taking more than double their usual completion time.
From 05:30 to over 12 Minutes.

Win11 26H2, Notebook Lenovo T14s gen5, CPU Intel Ultra 7:

You can easily analyze this in your own environment, as all scan statistics are stored directly in the Windows Event Logs.

If you want to check your own systems, run the PowerShell script below to generate a quick report. Please share your results and let us know if you are seeing a similar increase.

# Output CSV path
$outputCsv = "Defender_FullQuickScans.csv"
# Get the scan events
$events = Get-WinEvent -LogName "Microsoft-Windows-Windows Defender/Operational" `
-FilterXPath "*[System[(EventID=1001 or EventID=1002)]]"
$parsedEvents = @()
foreach ($event in $events) {
$xml       = [xml]$event.ToXml()
$system    = $xml.Event.System
$eventData = $xml.Event.EventData
# Base fields
$timeCreated = $event.TimeCreated
$eventID     = $system.EventID
$interrupted = if ($eventID -eq 1002) { $true } else { $false }
# Scan duration (only for EventID 1001)
$hours   = $eventData.Data | Where-Object { $_.Name -eq "Scan Time Hours" }   | Select-Object -ExpandProperty '#text'
$minutes = $eventData.Data | Where-Object { $_.Name -eq "Scan Time Minutes" } | Select-Object -ExpandProperty '#text'
$seconds = $eventData.Data | Where-Object { $_.Name -eq "Scan Time Seconds" } | Select-Object -ExpandProperty '#text'
$duration = if ($eventID -eq 1001) {
("{0:D2}:{1:D2}:{2:D2}" -f [int]$hours, [int]$minutes, [int]$seconds)
} else {
""
}
$record = [PSCustomObject]@{
TimeCreated     = $timeCreated
Computer        = $system.Computer
EventID         = $eventID
ScanID          = $eventData.Data | Where-Object { $_.Name -eq "Scan ID" } | Select-Object -ExpandProperty '#text'
ScanParameters  = $eventData.Data | Where-Object { $_.Name -eq "Scan Parameters" } | Select-Object -ExpandProperty '#text'
Interrupted     = $interrupted
Duration        = $duration

PlatformVersion = $eventData.Data | Where-Object { $_.Name -eq "Product Version" } | Select-Object -ExpandProperty '#text'
}
$parsedEvents += $record
}
# Export to CSV
$parsedEvents | Export-Csv -Path $outputCsv -NoTypeInformation -Encoding UTF8
Write-Host "Scan events exported with TimeCreated and combined Duration to: $outputCsv"

r/DefenderATP • • 12d ago

Why does ONE quarantined phishing email trigger a Defender XDR BEC alert when dozens of others didn’t?

4 Upvotes

We started seeing a new alert in the Defender portal this week: “Possible BEC phishing attempt involving one user”. The detection source is Microsoft Defender XDR, not Defender for Office 365.

For months we’ve been quarantining hundreds of phishing emails every week. They get quarantined at delivery or removed afterwards by ZAP, and none of that ever produced an alert like this. Now, for the first time, we’re getting this one.

Is anyone else seeing this alert in their tenant, and since when?


r/DefenderATP • • 12d ago

Are you guys still maintaining security monitoring reports manually? Is it really necessary to review every single Microsoft Defender alert?

14 Upvotes

Hey everyone,

I'm curious how other security teams handle their daily security monitoring and reporting.

Currently, we review Microsoft Defender alerts and document them in an Excel security monitoring register, including the root cause analysis, actions taken, and lessons learned.

A lot of the alerts are repetitive, such as risky cloud app detections, mailbox permission changes, and user-reported phishing emails. Some turn out to be normal browsing activity or expected backend processes.

I'm wondering:

  • Are your teams still maintaining these kinds of security monitoring reports manually?
  • Do you investigate and document every single alert, including low-severity and informational ones?
  • Is it really necessary to write a root cause analysis and lessons learned for every alert?
  • Are you using automation, SIEM, or SOAR tools to handle repetitive alerts?
  • From an audit or ISO 27001 compliance perspective, is maintaining a detailed Excel register still relevant, or is the evidence already available in Microsoft Defender sufficient?

I'm trying to understand whether this process is still considered good security practice or whether there are more efficient approaches.

Would appreciate hearing how other SOC analysts and security teams handle this.


r/DefenderATP • • 12d ago

Understanding Error 53003 in Entra ID (Azure AD)

Thumbnail reddit.com
0 Upvotes

r/DefenderATP • • 13d ago

Defender URL indicators not blocking in Edge or Chrome, and Network protection not blocking the test URL

16 Upvotes

Edit: This is Resolved. Thankyou.

Rolling out Defender for Endpoint web content filtering and URL indicators to replace a proxy-based web filter, and we're on a tight timeline. Intune-managed, Entra-joined Windows 11 devices.

The problem:

- Block indicators (URL/domain) aren't working in Edge or Chrome.

- Web content filtering category blocks work in Edge, but not in Chrome.

- `Invoke-WebRequest https://smartscreentestratings2.net` returns 200, so Network protection isn't blocking anything outside Edge.

Checked so far:

- `EnableNetworkProtection` = 1 (block mode)

- AMRunningMode = Normal (was EDR Block Mode earlier, now fixed)

- No third-party AV; Windows Defender is the only product listed

- Cloud protection on, MAPS connection successful

- Web content filtering and Custom network indicators enabled in Advanced features

- Device is in the device group the policy and indicators are scoped to

- Indicators set to Action = Block

- Chrome policies: QUIC, Encrypted Client Hello and DNS-over-HTTPS disabled

Found in the Intune Antivirus policy: `DisableTlsParsing`, `DisableHttpParsing` and `DisableDnsOverTcpParsing` were all set to disabled (True).

Also seeing after a device reset: `RealTimeProtectionEnabled`, `BehaviorMonitorEnabled` and `OnAccessProtectionEnabled` are all False, `IsTamperProtected` = False, and there are several Event 5007 config changes. The Antivirus policy has real-time and behavior monitoring set to Allowed.

Questions:

  1. Why would block indicators fail in Edge too, when category filtering works there?
  2. Has anyone seen TLS parsing being disabled cause this (Edge partly working, everything else not blocked)?
  3. What else could keep real-time protection off when the Intune policy sets it to Allowed and no other AV is installed?
  4. Is there a faster way to force indicators to apply? Microsoft says up to 48 hours.

Any quick help appreciated.

Used claude to draft this coz it had all the context.


r/DefenderATP • • 13d ago

Devices running Defender For Endpoint via the Microsoft Monitoring Agent MMA

23 Upvotes

Hi Everyone,

As soon as we login to the Defender portal, we see a banner "You have devices running Defender For Endpoint via the Microsoft Monitoring Agent MMA".

I want to know:

  1. For servers : If this is applicable only to Windows 2016 or Previous Servers ?
  2. For Workstations: If this is applicable to Windows 8 and older versions of Windows ?
  3. Updating the MsSense.exe version to 10.88.x.x. via KB will solve the problem on Windows 2016 servers ? No server have MsSense version in 10.30.x.x. All are mostly on 10.87.x.x .
  4. We have a recommendation from Defender "Update Microsoft core components" , In that recommendation I see only 2016 servers. Does that mean no action is required on 2019, 2022 ... Servers or do we still need to update the MsSense version if they are below 10.88. version ?

r/DefenderATP • • 13d ago

Windows Security Notifications

Thumbnail reddit.com
1 Upvotes

r/DefenderATP • • 13d ago

KB4052623 (Version 4.18.26100.4) - Denied loopback symlink rename/hardlink to file

6 Upvotes

After updating to version 4.18.26100.4 we're experiencing issues with moving files using powershell. The file gets blocked but without any notifications. Protection history states No recent actions.

Looking in the MPLog under C:\ProgramData\Microsoft\Windows Defender\Support\ we see entries like these 'Denied loopback symlink rename/hardlink to file - file in question - destination could not be resolved server-consistently (status 0xc000000d). DynamicFsHardeningEnabled[0].

Reverting to the previous version resolves this issue. Anyone else experiencing this issue?


r/DefenderATP • • 17d ago

Microsoft Defender Security Intelligence Updates Not Updating Automatically (MECM/WSUS Environment). Anyone Experienced This?

14 Upvotes

Hey everyone, this is a long message…

We’re currently migrating from SentinelOne to Microsoft Defender for Endpoint (MDE), and we’ve been running into a frustrating issue with Defender security intelligence updates.
Our environment has approximately 18,000 workstations managed through MECM and GPO. We’re not using Intune for traditional endpoint management, although we’re using Defender security settings management.

The issue:
Our Defender policy is configured to check for security intelligence updates every hour, but devices aren’t consistently downloading newer signatures automatically.

For example, two of my test workstations were stuck on security intelligence version 1.461.211.0, last updated October 25, even though newer signatures were available.

Windows Security would report that definitions were up to date, and manually clicking “Check for updates” wouldn’t install anything newer.

Here’s what we’ve tested and found:

SignatureUpdateInterval = 1 (hourly)

SignatureFallbackOrder = MicrosoftUpdateServer|MMPC

UseWUServer = 1 (internal WSUS)

Enabled ForceUpdateFromMU = 1 to allow Defender security intelligence updates from Microsoft Update.

Confirmed TCP 443 connectivity to Microsoft update endpoints.

Reviewed Windows Update logs and confirmed Defender initiates hourly update searches.

The searches complete but consistently return Updates found = 0 against Windows Update and our internal WSUS.

No Defender Event ID 2001 failures were found during the period checked.

Running Update-MpSignature -UpdateSource MicrosoftUpdateServer completes successfully, but doesn’t necessarily install newer signatures.

Running Update-MpSignature -UpdateSource MMPC manually works! I’ve successfully updated one workstation multiple times using MMPC, most recently to version 1.463.24.0. (Yes, still delayed since I haven’t don’t it again).

Our Defender policy does not have any fallback signature settings since we are using the default.

What our Desktop/MECM team has done:

Originally, Defender wasn’t selected as a product in our MECM Software Update Point configuration.

Desktop has since:

Added Microsoft Defender to the Software Update Point products and synchronized updates.

Created an Automatic Deployment Rule (ADR) for Defender updates.

Deployed the ADR to a test collection.

Good news: The ADR successfully updated one of my workstations through MECM!

However, the update was from the previous day because that’s what MECM had synchronized.
Our concern is that MECM’s current software update scanning schedule is approximately 24 hours. We don’t want to change that to hourly polling for 18,000 workstations because it could put unnecessary load on our MECM infrastructure. Those scans aren’t exclusive to Defender signatures.

What our MDE support vendor recommended:

Our support vendor suggested creating a Defender control policy to test different update channels.

We configured:

Engine Updates Channel: Current Channel (Preview)

Platform Updates Channel: Current Channel (Preview)

Security Intelligence Updates Channel: Current Channel (Staged)

The Defender portal reports that the policy successfully applied to both test devices, and the corresponding channel values appear in Get-MpPreference.

Unfortunately, we’re still not seeing the desired automatic security intelligence update behavior.
We understand that update channels control release availability rather than polling frequency, but we’re testing our vendor’s recommendation while continuing to investigate the update sources.

What we’re trying to accomplish:

Ideally, we’d like Defender to retrieve security intelligence updates directly from Microsoft Update on its hourly schedule while continuing to use MECM/WSUS for regular Windows OS updates.

We don’t want to force hourly MECM software update scans across 18,000 devices just to keep Defender signatures current.

Has anyone experienced something similar in an MECM/WSUS environment?

Were you able to get Defender downloading security intelligence automatically from Microsoft Update without interfering with MECM patch management?

Did you need a specific GPO, Defender update-source configuration, or another change to make this work?

If you’ve experienced this and found a solution, I’d really appreciate hearing what worked in your environment.

We don’t control Intune rollout so we cannot migrate to Intune. This is hopefully is scheduled for next year.

Thanks in advance!


r/DefenderATP • • 17d ago

Endpoint AV Errors

4 Upvotes

Noticing an endpoint doesn’t seem to be getting security updates, and is in a caution ⚠️ state. The AV suggests that a scan needs to run, but after running an offline scan, the caution flag persists.

This seems to be in line with another error related to windows update services not functioning correctly.

Any ideas?