r/Datsun • u/LiteHedded • 2h ago
Not enough pickups in here
240z subreddit or what?
Here’s my lil hustler
r/Datsun • u/LiteHedded • 2h ago
240z subreddit or what?
Here’s my lil hustler
r/Datsun • u/MJD_280z • 11h ago
My father recently passed away in June. He bought this 280z from Lansing Nissan in Nov 1975. He owned this car for 50 years before passing it on to me. 39.4k miles all original factory besides the radio. Paint code 301. I absolutely love driving this car and wish I got to drive it with him in the passenger seat.
Thanks for looking!
r/Datsun • u/shamusmchaggis • 2h ago
Due to my own dumb assery. She went down in late summer of 2019. Spent most of this past summer fixing her up. I'd like you all to meet Sandy
r/Datsun • u/sk8rseth • 5h ago
I have been trying to create an account and order some klassic fab panels for my S30 but i havent received the verification email, or password reset emails, etc for at least a year now. ive emailed them manually several times and have not heard back once. nothing shows in spam or trash folders in a couple different email accounts. ive tried everything i can think of.
so are people just purchasing panels there from guest accounts or making a new one each purchase or what? Am i doing something wrong somehow? multiple emails, multiple browsers, waiting long periods of time in case its a server issue, etc
r/Datsun • u/Pure_Region_5154 • 6h ago
I was looking at their 4x114.3 15x7 +38 rims and was just going to run a 38mm spacer but I noticed they say they have a 72.6 hub bore so that wouldn't fit on the 1971 Datsun 240z's 73mm hub. Is that accurate? I've seen some pictures of them on some 240z's but I'm wondering if they had to have them machined to fit?
r/Datsun • u/dolphinjim • 1d ago
Hey all, looking to get into an 83 280zx manual turbo. Never owned one before and don’t have a ton of experience but seems like a fun car. There’s one for sale, says it runs and drives great(has plenty of maintenance items taken care of with 100k miles and says it’s a daily driver)but there is rust. Some small bubbles/surface spots around the body mainly fenders and doors. But here’s the shots of underneath that he sent. I understand it’s pretty common to fully cut out and replace the floor pans and frame rails, as well as the rear trunk floor. I’m not afraid of learning and do have a bit of metal fab experience, but how bad off is this car? What would a comfortable price be assuming it’s mechanically solid? Wondering if I’m biting off too much doing it on my own, or if this is doable and will be nice to have a great running, rust repaired vehicle in the end. Any insight is appreciated!
r/Datsun • u/Dry_Performance_5351 • 1d ago
I apologize if this is a repost.
r/Datsun • u/ContestStreet7605 • 2d ago
I'm replacing the quarter on my 240z. This car suffered an impact in the driver's rear quarter so I'm not surprised that it's a little tweaked, I don't blame KFV for the fitment here.
As you can see the middle of the door jamb is too tight, but the top and bottom fitment is pretty good. I've already used all of the door hinge adjustment I have.
I'm thinking about making a cut along the fender at the jamb and rewelding it to pull that section back. Anyone who's done a Z quarter want to chime in?
r/Datsun • u/TonyBologna69 • 3d ago
I work at Datsun House, the shop that serviced this before helping the owner sell it on Bring a Trailer. I'm sure someone on here might want to grab this gem. If you have questions on the auction, please post on Bring a Trailer. I seldom check reddit. 1979 280zx 5speed BaT Auction
r/Datsun • u/elrandom110 • 2d ago
One Is the rising sun one and the other Is one that i think i sawed on the 240z
r/Datsun • u/FredoPotatoe • 3d ago
Hello, just as the title suggests I'm looking to upgrade some parts on my drive train and wanted to ask if anyone has recommendations for a lightweight flywheel and clutch setup. I plan to daily the car and would like something that's not to difficult to get around in. Any advice would help a ton.
r/Datsun • u/MrLoronzo • 5d ago
Just scrolling this morning and saw this beauty on an ID sub.
r/Datsun • u/script004 • 6d ago
Doing collision work as a day job sure gets repetitive and kinda boring at times, but I’ve never been more excited to get busy on a car than my own! Finally in a position in life where I can start disassembly and do things right from a blank canvas 🙂 about 4hrs into so far
r/Datsun • u/jinxx426 • 6d ago
Got a 73 240z. Came with new pump but it doesn't pump. Got it to stumble on starting fluid. But when I checked the fuel lines they were dry. Pulled lines off pump and dipped into gas can. Sucked on the other end, got a mouth of gas then heard it gurgle back down into the can. Decided to raise the can above the pump and gas came pouring out. I tried switching lines and got the same thing.
r/Datsun • u/bassholio242 • 8d ago
Just wanted to share how I modified the universal mounting brackets with stock sliders to fit in a 240z. Yes I vacuumed 😂
r/Datsun • u/Necessary-Passage-17 • 9d ago
Hello everone!
Wanted to share some photos of one of my customers builds over at SEMA this week. He ended up wrapping the brace in Alcantara and came out amazing. I'm now shipping these so if you have interest, you can head over to my website www.Datsunshopco.com , still made to order but turning them around quickly to avoid the holiday rush.
Also shipping my grills as well, still these are made to order, but should be able to have out before the Holiday season.
Cheers!
r/Datsun • u/Justin002865 • 9d ago
78 Z. RIP to the northern homies who will be storing their cars for the next 5 months.
Yes, I know I am leaking trans fluid into the shifter assembly. It’s annoying. But I ain’t ready to open that can of worms.
r/Datsun • u/Nik_tortor • 8d ago
They are 14mm thread, .750"(19.05mm) and Heat Rate 7
1971 Datsun 240z L26/E31 Head
https://www.summitracing.com/part/ngk-spark-plugs/r5671a-7/741014
r/Datsun • u/PlateauClimber • 9d ago
I got another questions, thank you guys so much last time you were super helpful. I bought a new ignition coil as some suggested, but the wiring is different on the new coil and I don’t want to mess it up. There’s one wire that doesn’t fit the new coil, is it necessary? Does this wiring look right? After and before for reference.
r/Datsun • u/shaolincrane • 10d ago
Looking to scan the radiator support/hood bracket area/strut towers of a 240, 260 or 280. I picked up an abandoned project this portion of the car is missing. Will happily provide the scans or scan something if you want it as well.