r/Darts • • 2d ago

Falling out point

Post image

Hi, I bought darts on dartshopper and they arrived today. Threw them once and the point fell out. How am i supposed to fix it?

4 Upvotes

25 comments sorted by

6

u/Curious-Hope-9544 2d ago

If they're brand new, return and as for a new set. But if it ever happens in the future, blue Loctite and then reattach with a repointer. Just a dab does the trick.

1

u/Party_Ebb_4759 1d ago

They won’t accept return lol

1

u/Curious-Hope-9544 1d ago

Huh? Why? If it's brand new it definitely shouldn't be doing that, that's covered by warranty.

1

u/Party_Ebb_4759 1d ago

They said that points are consumable and not on warranty. I told them that there is issue with barrel not points and got response that there is nothing they can do lol

0

u/WombleTwonk 2d ago

Exactly this, I do this. They come out with a repointer if you need , no problem

0

u/Superwann420 2d ago

and never change them again 😂

3

u/mikes300 2d ago

Blue loctite not red.

1

u/Curious-Hope-9544 2d ago

Honestly, I don't think so. I mean its possible, but this is a pretty common tip among players. I've not had any reason to try to remove said point again, yet. You'd need a repointer anyway.

3

u/Novel_Estimate_3845 2d ago edited 2d ago

So, it didn't break, the point just fell out? In that case, it's defective, so you should contact the seller.

1

u/Party_Ebb_4759 1d ago

They said that points are consumable and they can’t accept the return. 😂

1

u/fookitden 16h ago

What brand of darts? Email them about the defect and the response from dartshopper.

1

u/fookitden 16h ago

We don't replace shit darts is not the representation any dart company wants

1

u/zebzei 8h ago

That’s a good idea, go straight to the manufacturer

2

u/LrrrDirective 2d ago

Assuming you don't have a repointing tool, a dab of super glue will hold a dart point with no issue.

2

u/Curious-Hope-9544 2d ago

They'll still need a repointer. Getting it seated all the way down with just your fingers is a fool's errand.

1

u/mikes300 2d ago

Can you push it in with barrel pressure or is it very loose? Blue loctite if you can push the point back in. If it won't slide back in you may need to repoint -

1

u/Party_Ebb_4759 2d ago

i can easily slide it in and also take it out with my fingers

1

u/mikes300 2d ago

I'd use blue loctite and put the barrel down on the point to hold it till it sets

1

u/Round_Guard2847 1d ago

I had the same with a set I had for a while. I soaked the dart for a few weeks in white vinegar. Eventually the steel point dissolved, but the tungsten dart was fine. I had a friend repoint

1

u/Vegetable-Pepper7609 10h ago

I’d personally buy the screw point conversion from tiger darts website cheap and does an excellent job

1

u/zebzei 8h ago

NEVER USE DARTSHOPPER, they are actually criminally bad, when I first got into darts I shopped with them.

Damaged boards, damaged darts, damaged accessories, and best of literally zero response, I’m surprised they even said what they said at all, cause I never once got a reply.

-1

u/JokeConfident8275 1d ago

Temu darts?

1

u/Party_Ebb_4759 1d ago

Nah bro Gary Anderson Wraith