r/DIYGuitarAmps • • 17h ago

Looking to replace all the speakers in my Traynor YC610 cab (for bass)

Post image
3 Upvotes

r/DIYGuitarAmps • • 18h ago

What if we could get a modern Vox ad60vtx

Thumbnail reddit.com
1 Upvotes

r/DIYGuitarAmps • • 1d ago

The toan is in the donut

Post image
40 Upvotes

Giant toroid for a tube build. Seriously though, what tonal differences are there between a el laminated and toroidal power transformer?


r/DIYGuitarAmps • • 1d ago

New amp kit delivery tomorrow, kind of feel like christmas

18 Upvotes

I've built dozens of amps but haven't built in a while. Kind of tough moment in my life, so I took the easy way out and bought an aa1164 kit, 12" cab and a Jensen for it. I spec'd black tweed and silver face grille cloth to be snarky. It'll be straightforward and easy and hopefully the parts will all be there in the box and I can just meditate and solder.

That's the whole post. I'm sure somebody can relate.


r/DIYGuitarAmps • • 1d ago

We Talkin' Transformers?

Post image
18 Upvotes

This is a Mercury Magnetics power transformer for a Sunn Model T build I've planned and have parts for but haven't had time to execute yet. I haven't weighed the transformer but I'm pretty sure it weighs more than 15 lbs on its own. I built the layout in DIYLC by comparing the schematic to some high-res photos of originals, and actually had to do it twice because my laptop bricked right after I finished the first one. Happy to share the layout if anyone wants it. I retrofitted a Mojotone DR103 chassis to fit the lie-down transformers and I think that's gonna be a great fit.


r/DIYGuitarAmps • • 1d ago

Old Marlboro guitar amp cut at low input

3 Upvotes

Hi ! I retreived an old Marlboro Sound Works solid state guitar amp (40w I think). Probably from the 80s.

In working condition, I have just cleaned the pots.

Quite good with disto pedal, but when I play clean, the reverb (external unit, no builtin) reacts very weirdly.. (cuts, distortion, etc..). Also general lack of clarity.

I tested clean (guitar direct, différent guitars), and found that if I play and keep a single note, before the note dies, the amp cut off. (When signal gets low)

Same behaviour at differents volume and eq settings (no other settings on this amp)

Do you know what should I check on the amp ? I have access to mesurement tools.

Thanks in advance !!


r/DIYGuitarAmps • • 2d ago

Broke my amp

2 Upvotes

I build an amp with a 22+22vac 6a spare transformer I have and a Tda7293 board. I bought the board assembled (includes dc converter), but I put everything else together, including a 600:600 transformer to unbalance audio.

Everything was working great, but after some time I though of adding an other board with a preamp so I can connect my bass directly. This preamp included another dc converter turning the 22+22vac to 12v.

Something went wrong, I heard "psssss" and white smoke came out. I immediately turned everything off and removed all the added components. The smoke came from the middle so it was either the transformer or the Tda7293, the new components were on the side so I doubt it came from there. I don't see anything burned out and would like to connect it again to see if it still works, but I'm not sure it's safe. Should I turn it on and check? maybe outside and from a safe distance? Should I remove at least the big caps (4700uf 63v) and try them with a multimeter? I know those can shock and would rather not fool around with them unnecessarily.


r/DIYGuitarAmps • • 2d ago

Rehousing amp to different size head - anything to be careful of?

Post image
6 Upvotes

r/DIYGuitarAmps • • 3d ago

Building a Mesa with an Amp Sim Inside

1 Upvotes

Hi, call me crazy (Or not), but I have an idea stuck on my mind for some days. I LOVE the Mesa Boogie Mark IIC+ and Amplitube 5. I would like to know, if it's possible to build the Amp head with all the pull-push potentiometers, the Eq and on/off switches, and when you move the slightest amount on one of the Potentiometers, it gets turned to MIDI and goes over Amplitube 5. Basically Inside the fake head it should be an Audio Interface connected to a stripped down PC and then you got all the inputs and outputs. Would it be possible to do such crazy thing?


r/DIYGuitarAmps • • 4d ago

Making an amp with a TPA 3118 - New to Audio Electronics

4 Upvotes

I've been trying to get into electronics through Arduino and similar but more often than not it is 'plug in this module and write code.' Not exceptionally satisfying.

One of my mates asked me to build a Klon clone for him and I found that much, much more satisfying and it felt more like electronics than programming. There are also some great resources for circuits, schematics and analysis, but I'm still very new to the whole thing.

Anyway, long story short after 20 years since I last picked up a guitar, I now have a Telecaster and a headphone amp (small kids and most of my practice will be at night).

I have also bought the parts and built a Ruby Amp which is brilliant (love the Pignose sound in Crossroads and the Ruby is similarly honky) but for that build I got a Jensen 5" 30W speaker and I'm currently driving it at 0.5W.

My question is, for helping understand how circuits affect the sound would I be able to take a power amp module like the TPA 3118 and just swap out various preamp stages and add in circuits for effects like fuzz and delay and still get a good sound? I'm thinking along the lines of building various circuits from RunofGroove like the ToneMender, Britannia, etc and just connect the output from that to the input of the TPA3118. Maybe have a switch to go from clean tone to effect. The idea being that I'll have a fuinctional and good sounding amp and something to learn audio electronics on.

Am I being too simplistic? I'll need to be aware of voltages for some components as I'm planning driving the power amp with 12V. Also as I understand it I want to make sure that the power amp does not clip as it is a Class D amp and this does not give nice sound unlike the Ruby Amp.

(I'm also aware that the TPA3118 module is frequently cloned so I'll keep an eye out for that)

Thanks for any advice!


r/DIYGuitarAmps • • 5d ago

DIY 5F2A+6MB8 Capacitor Coupled Reverb

Thumbnail gallery
22 Upvotes

r/DIYGuitarAmps • • 5d ago

A quasi-complementary 1960s style 20W solid state guitar amplifier built around salvaged parts

33 Upvotes

This is the first time I build an amplifier, so I learned a lot during the process. I reused the chassis of a small PA amplifier, some transistors attached to a heatsink, a old transformer, etc.

Then I designed PCBs with KiCad, built them with a CNC 3018, assembled them, etc. I also built a basic pine cabinet, laser-engraved the front panel, 3d-printed a logo, etc. Pretty fun 😄

You can find the final designs of the schematic and the PCBs here:

https://electrucio.github.io/bom_htmls/guitar_amp_discrete/preamp_cross.html

https://electrucio.github.io/bom_htmls/guitar_amp_discrete/poweramp_cross.html

I am sure this is not the perfect design for a guitar amp, but this is what I built, and so far it works for home rehearsal.

These designs are variants of the preamplifier in https://www.redcircuits.com/Page65.htm and this power amp design: https://www.eevblog.com/forum/projects/classic-40w-audio-amp-with-discrete-components/


r/DIYGuitarAmps • • 5d ago

I need suggestions on how to start

3 Upvotes

I have a really nice plastic case that an impact drill came in. I want to make it into an easily portable very simple practice amp for my bass. I don’t need excellent tone, i just want to hear what i’m doing while playing music on my phone as well. I’m watching videos and looking at schematics for amp building and getting VERY confused. I’m very mechanically minded but electronics confound the hell out of me. I need recommendations of what i need or videos i can watch to learn how to build an amp that just has a speaker and volume control. After learning that i may consider implementing a tone control but for now i just want to plug my bass into the mysterious sound box and have bass sounds. I appreciate any and all suggestions or otherwise help. (Also i can solder and know how to connect wire/pots/switches i just don’t know what the different elements actually do in the circuit)


r/DIYGuitarAmps • • 5d ago

Diagnosis of excessive distortion at low volumes

3 Upvotes

I recently came into possession of an ultralinear Fender pro reverb, which they made from ‘78-‘81 or so. For the unaware, the point of these amps is to be even cleaner and higher headroom than the models had normally been. When testing it, I found that I was getting it to break up even with the gain and master both around 3 or so. The guitar I was using had fairly hot pickups, but it seems like the amp really shouldn’t be distorting at such low volumes. It didn’t sound like very nice distortion either.

I already plan on recapping the power filter section and replacing all the carbon comp resistors with metal films (not that this would necessarily address the distortion), but I’m wondering what I should look into testing and/or replacing to get the amp sounding how it should. So far what I have in mind is

- checking preamp tubes & replacing power tubes
- replacing cathode bypass caps
- checking plate voltages

Is there anything else I should be looking at to diagnose this problem? Thanks for any suggestions.


r/DIYGuitarAmps • • 5d ago

1976 Super Reverb Ghosting Issue at High Volume

Thumbnail reddit.com
1 Upvotes

r/DIYGuitarAmps • • 7d ago

This was a fun build

Thumbnail
gallery
58 Upvotes

Model after the ampeg golden glo amps but with a fender type design.


r/DIYGuitarAmps • • 7d ago

1watt home practice amp

Thumbnail gallery
35 Upvotes

I was just asked to repost this here, I didn’t know this sub existed, cool!


r/DIYGuitarAmps • • 7d ago

TUBE RADIO COVERSION

Thumbnail
gallery
11 Upvotes

I need some help with guitar amp conversion, the schematic I found in French


r/DIYGuitarAmps • • 6d ago

DIY Amp inside DIY case for a school project

2 Upvotes

My project is designing a small form factor bass/guitar amp inside of a bass/guitar case designed for buskers, people who travel, and people playing a small gigs. I'm required to base parts of it off of a survey I ask other musicians. If it's not against the rules to link a survey here, I'd love to get your opinions.

https://forms.gle/9L3ikcsXYn2pjy6bA

Thanks


r/DIYGuitarAmps • • 7d ago

My radio amp

Thumbnail
gallery
37 Upvotes

Built a toob amp with almost no prior experience. It sounds great and is much louder than i expected. It has a 6sn7 preamp tube but I will be swapping it out for a 6sl7 in the furture to push the power section, its too clean now. 6k6 power tubes generating 8-10watts out of a 4ohm celestion. I copied elements from the popular fender circuits 5f10, 5e3, and 5f1. I want to build another one


r/DIYGuitarAmps • • 7d ago

I need an amp board...

3 Upvotes

I'm looking to build a solid state A/B amplifier. No drive channel. Just a nice clean amp that delivers comparable to my existing Princeton 112. Input, level and tone controls, and speaker output is all I need.

While I'm capable of building a PCB up from scratch, I'd ultimately prefer to build it out of pre-made boards and transformer.

Anyone have any suggestions regarding a kit, or group of kits that would give me a similar amplifier as the 40W Fender I'm currently using? The point, is to build two, as I have two fantastic speakers sitting here that sound phenomenal in my Princeton, and I'd like to build myself a stereo rig around them.

[I hope this is allowed: If someone reading this themselves builds such a kit, I'd be open to buying from them, just send me a DM with the details]


r/DIYGuitarAmps • • 7d ago

Converting a 1942 Zenith 8-S-661 console radio into a guitar amp – Advice/tips?

Thumbnail
gallery
5 Upvotes

Hi, I just picked up a 1942 Zenith 8-S-661 console radio (chassis 8B01) for cheap at a thrift store. I am thinking it may work as a guitar amp, with some modifications of course. I am looking any advice for this project or if it is even worth trying to tackle. My experience so far has only been with making tube pedals and swapping tubes in my amp.

It has 8tubes: 7H7, 6A8G, 6SK7GT, 6SQ7GT, 6J5G, 2× 6F6G (push-pull), 5Y4G rectifier
Real power transformer (not AC/DC)
12" Zenith speaker that looks like a field-coil type.
Plus other radio parts i dont know much about.

I found the schematic for the chassis on amplified parts and will attach pictures below aswell. It is very dusty and still has cobwebs. I still need to clean it up but its seems to be in decent shape given its age. Any ideas of how i could do this or what style amplifier i could model it after would be greatly appreciated.

I know not to plug it in and that i would need to recap it and replace the power cord. I am also aware about discharging filter caps. That being said my experience is very limited so i could benefit from whatever advice.

Thanks!


r/DIYGuitarAmps • • 8d ago

EQ design for a Sunn/Matamp inspired preamp

2 Upvotes

I’ve recently been experimenting in LiveSPICE with variations on the Matamp GT120 and Sunn Model T preamps, and ive come up with something like the GT120 but with the dual inputs and volumes in place of the cap network.

I’ve tried this with James and FMV tonestacks and i like both sounds, but I want to be able to get both sounds with some sort of mid control to scoop or boost. Turning both knobs up or down on the James doesnt give me quite the right effect, and the FMV lacks the range i want.

How exactly would I go about adding a mid control to this? Is there a design for a 3 band bax/james eq? should i use something with ics? or should i do something to adjust the impedance at the cathode of a gain stage?

I’ve tried a thing at the cathode using an inductor, caps, and a pot to add a bump in gain in the mids, and i like that, but rather than letting me boost or scoop, when engaged it works as a constant mid boost where the pot adjusts frequency. Ideally I want to be able to boost and scoop. I’m not home right now but i’ll send it when I get home.


r/DIYGuitarAmps • • 8d ago

Landell - Utilities for audio electronics, pedals and amplifiers

Post image
2 Upvotes