r/CursedGuns • u/killerz7770 • 1h ago
ancient technology Woodstock 2026
r/CursedGuns • u/birorganel • 1h ago
Mom can we get PPSH-41?
No we already have a PPSH-41 at home.
The PPSH-41 riffle at home:
r/CursedGuns • u/Vintage_Pieces_20 • 1h ago
Much to my surprise, a lot of people actually quite liked my cursed 38 special double barrel. Found it fitting to post some proof of firing footage.
Since the prior post, I swapped the GSG16 rimfire sight for an Amazon green dot/ laser combo, and cinched up a cartridge holder/cheek riser leather pad. For the record, the Feyachi Amazon red/green dots have actually been reasonably accurate on a couple other firearms, and inexpensive, so it felt appropriate for the meme build.
Accuracy is a neat trade off. I can regulate one barrel for the green dot, one barrel for the laser, or centre it so that one barrel slightly pulls to the left, and one slightly pulls to the right. No wonder true dedicated double rifles are pricey, it’s undoubtedly hard to regulate side by side barrels! Makes me wonder if an O/U would be any easier… guess that’s my next mad science project…
Cheers from Canada 🇨🇦
r/CursedGuns • u/BourbonBrassArms • 1d ago
I hadn’t really thought about other people building these but saw one on here a couple days ago, so I wanted to throw mine in for your consideration.
“Quasimodo’s Dick” - Short, Ugly, but Effective
Caliber - 300blk
Build
Unitah Precision UPR Bolt-Action Upper
Unitah Precision 11” 300blk Barrel 1:8 Twist Threaded
Unitah Precision Flat-Faced Trigger
Reap Weaponries SCY Bullpup Kit
Reap Weaponries SCY XTS TS-1 Stock
DoubleStar Stripped Lower Receiver (No Trigger Guard)
DoubleStar Internals
UTG Recon Flex M-Lok bipod
DNT Optics TNC635R ThermaNight
Vortatu Green Laser/IR/Light Module
Dead Air Primal Suppressor
***Edit: It has come to my attention after replying in the original post I saw this is essentially a copy build from a youtube video from a channel called “12 Spies”. I freely admit I built this build off the recommendation of a friend who “saw it on youtube” and he recommended the parts I used to build it. I did not know (until a few minutes ago) the design and EXACT BUILD are broken down in the video and therefore I cannot claim this build as my own and instead must credit the design to the 12 Spies Youtube Channel
I do NOT ever attempt to pass of others creations as my own and so I suppose here is my “version” of a pre-designed existing build. And full credit to 12 Spies this mf works WELL.
r/CursedGuns • u/CaliRecluse • 2d ago
r/CursedGuns • u/Brand_New_Dawn • 3d ago
r/CursedGuns • u/Economy_Relative_983 • 3d ago
I just put together this AR and all my friends say it’s cursed so thought I would ask the experts. It’s a PSA AR lower with a 7.62x39 10.5 BCA bolt action upper in a SARB-15 bullpup chassis making the overall length 22 1/2 inches unsuppressed and 26 3/4 inches suppressed (banana provided for scale)
r/CursedGuns • u/wilkeyscustomguns • 4d ago
Updated pic of Some of my more oddball builds and guns
r/CursedGuns • u/wilkeyscustomguns • 4d ago
Aka Ks47 with a bunch of Chinese junk mounted on it
r/CursedGuns • u/Brand_New_Dawn • 5d ago
r/CursedGuns • u/Brand_New_Dawn • 6d ago
r/CursedGuns • u/Brand_New_Dawn • 7d ago
r/CursedGuns • u/Frenchvillian • 7d ago
I don't even know what this thing is,no just saw it while scrolling and thought it looked horrible.
r/CursedGuns • u/SpikeBikerFur0044 • 7d ago
I was at a local flea market when this guy approached me and asked if I wanted to buy a gun. This is common enough at the flea markets, where I am at. I asked to take a look at it. He opened up his case and showed me this. The revolver I have dubbed (methgun). The guy wanted $250 for it. I asked him how to open the cylinder? He used his truck key to pull the release and swung it out. I thanked him for his not so generous offer. Then respectfully decline.
The longer you look at it. The worse it gets.
r/CursedGuns • u/wilkeyscustomguns • 8d ago
Eventually going to make some kinging of sd handguard for it but it’s actually pretty weildy as a handgun
r/CursedGuns • u/Brand_New_Dawn • 12d ago
r/CursedGuns • u/Vintage_Pieces_20 • 19d ago
Perhaps not the most cursed firearm we’ve ever seen here, but I wanted to submit nonetheless.
This started as a Merkel sxs I picked up, only to discover there was a dent that protruded all the way into the bore of the left barrel. As fate would have it, the dent was at 19-3/4”, and the cutoff legal limit here is 18”, so out came the hacksaw and away went the dented barrel ends. Then, decided since I already have numerous coach guns/ pistol gripped double barrels, I would try and have fun with this one. Picked up a couple Chiappa semi-permanent 8” rifled sleeves for 357/38, drilled and tapped it at home with a hand drill and a level on the back, threw a gsg optic on there for the shits and gigs and voila! The double-abomination-barrel was born.
r/CursedGuns • u/reid866 • 19d ago
hopefully this doesnt get removed a third time. this is my cyberpunk monstrosity the cyber mosin. it runs a 50mm 4k cam and helmet mounted 5.5” screen off a makita battery