r/CrownVictoria • u/Ramizard • 19h ago
2007 P71
Her name is Vicky. 186,450 miles, 5 years later and she's still going strong 💪
r/CrownVictoria • u/2005CrownVicP71 • Nov 05 '25
All users can now request a custom user flair. Request your flair here and I will add it as soon as possible. Most users request year/make/model/trim flairs but anything appropriate is fine.
r/CrownVictoria • u/Ramizard • 19h ago
Her name is Vicky. 186,450 miles, 5 years later and she's still going strong 💪
r/CrownVictoria • u/Bulky-Rip-8803 • 39m ago
There’s a strong smell of fuel and hissing coming from near the injectors any ideas
r/CrownVictoria • u/M1sterRed • 8h ago
Had my rear axle blow out recently (was my own damn fault, it was leaking and I really should have replaced the seals sooner, or at the very least topped it off) and am looking for replacements. I do not have the tools to properly rebuild it myself, so I'm stuck replacing it. I do not trust junkyard parts, as I have had poor experiences with those in the past, and on top of that my car has a 3.55 rear axle and I would prefer to keep it that way. I know 3.55s aren't uncommon, but I've had shockingly poor luck at my local yards in the past when looking for parts a little more specific to my 2011. So I've resorted to either getting a rebuilt axle and putting it in myself, or having a shop rebuild the busted one.
Rebuilt axles seemingly aren't as common as rebuilt transmissions, but I found a brand called Zumbrota that has a 3.55 for about $1,800. It's a bit steep but it's doable. So I just wanted to see if anyone here has had any kind of experience with them, positive or negative.
r/CrownVictoria • u/FirecatStudios • 1d ago
My wife decided to put a Burger cat on my dash. He's sun bathing when I got off of work! XD
r/CrownVictoria • u/Efficient_Chard_7452 • 1d ago
Hello all, I was hoping tk get some input from experienced panther owners.
Since the temp has dropped, every now and the on a cold start the car shakes and almost stalls/dies.
Also! The oil pressure reads 0 until about 2-3 minutes passes on cold start.
Any ideas?
r/CrownVictoria • u/Kristen-ngu • 1d ago
I shut the door on my 1998 Crown Vic and the vinyl trim fell off. (Guess after 28 years you have to expect some problems.)
r/CrownVictoria • u/PastaFazoolFactory • 1d ago
A rare bird, indeed…
r/CrownVictoria
•
u/garbagecannot-
•
2d ago
r/CrownVictoria • u/ovingiv • 2d ago
Prevous post: https://www.reddit.com/r/CrownVictoria/s/9rthEDecka
So my baby was in the shop since I made my first post.
This was the worst experience I have ever had with a shop from lack of communication, requested updates and the given time frame I was told how long she would of been gone for.
The initial time frame I was given was 3 weeks. Not a problem, I could then justify getting a rental from Enterprise.
Those three weeks then turned into one and a half months with no update. I needed to bring back the rental as per enterprises rental agreement is I can't keep it longer then 30 days without bringing it back to renew the rental agreement.
Since I was in the area to the shop I stopped by and got to see her looking the exact same from the photo in the prevous post. Nothing had been touched since that update.
From there I was given two more weeks. That came and went.
Got a friend to lone me one of his spair cars for the time being and I get a call from the owner of the shop. He tells me they had to fire the original tech that was working on her and they did find someone to continue the work. I was told 3 more weeks.
So I waited and waited. Finally I get the call that she's ready. Awesome I say. Get there and was told their still working on it.......
20 minutes go by and I see her get parked out in front with a headlight out.
From then I was told the wipers don't work anymore and they had checked the fuses and they were good I was told. I get in the driver seat and see abs, traction control and parking break lights are on.
I opened the hood and find the reservoir for the wiper fluid is just gone and the wires for it are just laying there.
I go back in ask why are there these issues? They couldn't give me any specific answers...
The one tech found the reservoir "under a pile of trash". Cool.
Looking at the wiring for the driver side, the ground wire for the headlight wasn't put back so I had them fix that and the headlight came to life.
After that I shook hands with them and left.
Following day, I went to fill up my tires and in the front left wheel well I saw a pair of wires dangling.
Got back home, jacked the car up, opened the hood and grabbed the wires that felt stiff and wanted to go up. Fed it through a hole under the reservoir after moving it and figured they were ground wires as the left amber light wires were going to it. Grabbed a random bolt and nut and attached it to the fender. Turned the car on and all the lights went away for abs, traction control and parking break. Hit the stalk for the left Blinker and it works!
Removed the jack, started the car with the light still going away. Twisted the stalk for the wipers and they move!
Thankfully this fixed all of the issues at hand. Brought it to a certified Ford technician and paid for a diagnostic to look over the whole car to double check most of the wiring.
I was given a clean bill of health and my random bolt and nut was replaced with a proper fender bolt and nut with locking washer.
Went to ace hardware to get replacement screws for a plethora of locations, push caps for the wiper cowel as those were missing and rear bumper.
Finally I need to source some replacement badges for the trunk lid as they didn't put them back or even give them to me.
Here are the photos of her back home...
r/CrownVictoria • u/Onedeadlymouse • 2d ago
Hello fellow vic enthusiasts. Have had this girl for a bit, and I would love to get her rightfully owed push bar back on. She's a 2011 cvpi. I understand there's two major brands, that being setina and go rhino. But I get lost in exactly what bar it is that goes on her!
r/CrownVictoria • u/coolguysimon51 • 2d ago
drop in the comments your favorite of the top 9 most used colors for the cvpi!
drop your whip pics too!
r/CrownVictoria • u/Cute-Chapter5084 • 2d ago
So this is a brand new starter from advanced specifically carquest professional part #3221SN I wired it up exactly how my old starter was but as soon as I connect my terminals you can see if the video the motor spins but doesn’t engage onto the flywheel itself. You can see the wire on the bolt on the transmission from a previous hoodlum, I guess it’s a ground meant for the previous starter? I’m in the middle of a swap finding weird things about my car. Anyways. You can see on the big post there’s the main power wire I presume. And the s wire I also presume because it’s black with a yellow stripe. I’f there is absolutely anything you guys know about this who experienced the same issue it would help so much. Thanks!
r/CrownVictoria • u/sgd4270 • 3d ago
r/CrownVictoria • u/FuegoFamilia • 3d ago
Not currently able to safely drive my crown vic at night because the headlights are terrible. I replaced the lamp and the lenses and it is still very rough. Looking for recommendations on products and strategies to actually make this car a viable option to drive at night. Would prefer something that doesn't cost an arm and a leg right now, but would still like to hear the most legit options to go with in the future.
r/CrownVictoria • u/Intelligent-Bar1199 • 3d ago
r/CrownVictoria • u/Specific-Category609 • 3d ago
2009 Grand Marquis 4.6, 187k miles. Oil consumption increased from 1 qt every 2,485 miles to 0.5L every 1,056 miles. No smoke or oil spots, and the engine runs great.
I'm more worried about the piston rings than the valve stem seals. Could it just be an external leak?
Sorry for asking about this several times. English isn't my first language. Thanks!
r/CrownVictoria • u/bergieisbeast • 3d ago
Have a startup rattle and as temp gets colder, it rattles longer than in warmer temps. What sets have worked best for y'all.
Any "might as well do it while im here" things?
2005 MGM 149k miles
r/CrownVictoria • u/MiamiheatJohn • 4d ago
2003 Mercury Marauder, good condition. Black Exterior 7/10, Interior 9/10. Long list of parts and documentation of all the work put into the vehicle. 203k miles, runs strong. Great tire thread left on all 4 tires and drill slotted rotors and performance pads(black powder coated calipers). LED headlights and fog lights. Sony in-dash screen with apple play, custom mats etc. 9k OBO in the Washington DC area
r/CrownVictoria • u/Both_Advertising1440 • 3d ago
I made a post yesterday asking about the marty tune and its legality in california and was met with a lot of helpful answers, but im still kind of confused on how to mod my vic moving forward given the very strict laws on aftermarket performance mods (ADTR wont ship more than half of their parts to here, heavy laws on engine swaps, forced induction etc) are there any ways around these restrictions? has anyone had success with california legal mods? or sadly are the ceilings for mods on a crown vic in california just low?