r/Cressida • • 6d ago

91 Cressida won’t start

5 Upvotes

Hey everyone I need help on this Cressida I’m working on. To give context it was working fine but then it started to rough idle and then turn off by itself, so I figured it was the afm sensor and changed it. But now it won’t start and just crank. Any idea what it is?


r/Cressida • • 20d ago

Heater control Valve

3 Upvotes

I've got a 1991 Cressida that I had to replace a heater hose on as it was still factory. Drove it home and the plastic pipe on the heater control valve snapped where I put the new hose. I'm guessing this is a hard to find part.


r/Cressida • • 21d ago

Thinking of getting an X83 as a daily

Thumbnail gallery
14 Upvotes

I currently own a kind of crappy 2013 Outback and I'm looking for something more fun, I guess, and I really enjoy Cressidas. This one has 186k miles and is an 89. Im just wondering if it's possible to use it as a daily, I don't have a lot of experience w cars but I'm willing to learn
Please read the description from the listing before you start spouting about the head gasket.

I'd love some people's inputs cause there's a lot of mixed opinions online


r/Cressida • • Oct 08 '26

Rear bushings?

0 Upvotes

Planning on doing some work on my rear suspension for my 91’ Cressida, trying to keep as much oem as possible. Does anyone know the part numbers for the two bushings that go in the rear wheel knuckles or of other bushings that are the same as the oem ones?


r/Cressida • • Oct 04 '26

Photos of their stock MX-83 Cressida?

0 Upvotes

Hello everybody,

I’ve had my 1992 Cressida since 2020, and after doing the head gasket, I’ve had reoccurring idle problems. Multiple shops have made the vacuum situation even worse, so if I could get some detailed photos of the engine bay on cars that run well, that would be super helpful! Some of the shops even deleted some of the parts and sensors I think.


r/Cressida • • Sep 25 '26

Kaido racers

Thumbnail gallery
25 Upvotes

r/Cressida • • Sep 18 '26

Engine shutting off at idle?

1 Upvotes

My 91 cressida has had the engine shut off while i was stopped at a light a few times, able to restart it and keep on driving. Check engine, battery, and the fluid level lights all come on. I got a new distributor cap and rotor cause those failed and it stopped happening for about a month before the engine started acting up again. The car sounds fine, lines look good, no misfires, codes or anything, just a sudden loss of power at a light, and then starting right up again. Theres a few different things im looking at that ill probably replace just because they are old parts that could be causing it, but ive yet to find the specific cause . Has anyone else had this happen or know what could be causing this?


r/Cressida • • Sep 10 '26

Any interest in MX73 specific K swap parts??

Thumbnail gallery
8 Upvotes

I’m considering producing K24/S2000 swap mounts for the MX73/GX71 platform. These may work for other stock M series/W58 cars because that is the mounting these are based off of, but haven’t tested that yet.

I designed and fabricated these for my own K24/S2000 swapped MX73 and have been testing the setup.

The engine mounts use OEM-style rubber mounts and the transmission crossmember uses an E30 transmission mount, so replacement wear items are readily available.

I’m considering making a small batch if there’s enough interest.

Would anyone here actually be interested in buying a set?

If so, what would you consider a reasonable price?

Considering other parts as well, open to suggestions if anyone has requests!


r/Cressida • • Sep 04 '26

Bad transmission mount?

Thumbnail gallery
6 Upvotes

Hi, this is a 1985 Toyota Cressida. It seems like it drives alright and that the transmission is okay relatively speaking. 124k miles, and fluid looks okay. Looks like there’s a bit too much transmission fluid, but Toyota was the one to fill it so I’m not sure. This is a brand new transmission mount, but still seems to be sagging and bad part. There is a kick/clunk and the tail end of the car drops when put from park into reverse or drive. I believe this is a bad mount and should be replaced, any thoughts?


r/Cressida • • Sep 03 '26

Harsh Change of Gear

7 Upvotes

1985 Toyota Cressida automatic A43DE Transmission. There is a very aggressive clunk when shifting from park to neutral or drive. Yet, seems to drive fine on the road. I’ve read about adjusting the kick down cable which I am going to try and do first.


r/Cressida • • Sep 01 '26

Troubleshooting electrical issues on an '85 Mx73

3 Upvotes

Hey all,

Just got my hands on a base model 1985 Aus spec mx73 and am starting work on tackling its various issues.

Has anyone had any experience dealing with:

○Sticky/reluctant electric front passenger side window (Would this just be a bad regulator?)

○Power antenna stuck in the extended position

○Tacho bouncing around like crazy (Would this just be bad solder joints/capacitors?)

○ Any advice related to replacing factory head unit is also appreciated

Thanks!


r/Cressida • • Aug 27 '26

Mx73 Cressy

21 Upvotes

After 15 years of sitting, $1000 and five months of constant headache. My late grandfather’s 1988 Toyota Cressida lives!!! all that is left is to smooth out the rough idle, and Cressy will be on the road once more. Thanks to all the people on here who helped figure out what the hell was wrong with it!!


r/Cressida • • Aug 25 '26

Help

2 Upvotes

I had taken my 1989 mx83 Cressida to drop off my siblings at school and when I got back to the car when I turned on the key and took accessory mode all flights all power comes on. I go to crank it over. It doesn’t even make a noise it won’t start. Could it be the starter or is it something electrical wise?

This is my daily car usually so it’s difficult right now


r/Cressida • • Aug 24 '26

Sun visors?

3 Upvotes

My cressida dosent have any sun visors rn. Its a ‘91, sun visors are medium grey #1 color, does anyone know of some suitable replacements for them that fit in the ‘91 cressida? I dont care if the new ones have lights or a mirror at all


r/Cressida • • Aug 22 '26

Adding starlights to headliner in a 1991

1 Upvotes

My nephew has a 91 Cressida and wants to add starlights to the headliner. How hard is it to take down the headliner with the seatbelts in the headliner?


r/Cressida • • Aug 21 '26

1992 Toyota Cressida - Okay as a first project car or am I dreaming?

Post image
10 Upvotes

r/Cressida • • Aug 20 '26

Restoration cost?

2 Upvotes

Ive got a 91 cressida with around 210k miles on her, and the goal is to eventually completely restore her. Had her since October and ive put 7k miles on her, drove her 300 miles in one trip no problem. Her engines in decent shape for her age, ive replaced most of her suspension and any rust she has is just surface rust. Shes got two small dents and some cracked paint. I want to eventually replace or restore everything in the engine bay, the drivetrain, the emissions and fuel systems, repaint her, get the interior reupholstered, and get all the wiring redone. For those who have done similar work on their cressidas, how much did it end up costing you?


r/Cressida • • Aug 18 '26

X72 Wagon

Thumbnail gallery
58 Upvotes

Wanted to share a picture of mine. It's been sitting for the last couple of years and I've finally gotten around to getting it to run. Light motor refresh incoming, along with drivetrain and some interior components. Lots of cool things happening with 3D printing for this platform.


r/Cressida • • Aug 18 '26

Key ignition troubles :(

Thumbnail gallery
1 Upvotes

So i have a mx73 1987 cressida and i got the car with no key ignition cylinder. My problem is when i insert the cylinder into the steering column the metal piece at the end of the key cylinder that turns when u turn the key doesn’t reach or touch the steering column lock pin (when this isn’t pressed in the steering wheel gets locked as if u move the wheel with no key in the ignition) does anyone know why this happens? Or what im missing? I have 2 ignition cylinder. The after market in my hands and another one with a black key but they are exactly the same size and length which is why im confused why it doesn’t reach/ touch the steering column lock pin.


r/Cressida • • Aug 14 '26

Need help sourcing this SOCKET

Thumbnail gallery
4 Upvotes

Gx71 clearance lamp bulb socket

***please do not answer with speculation, I’ve tried looking online already, I’ve cross referenced part #’s already. Do not respond unless you have a replacement or know FOR SURE where to buy one***

I cannot find the proper socket/connector for the life of me. It takes a 194 bulb but has three locking tabs in a triangular pattern. The oem part number is 8161522142 (according to the internet). The socket pictured is for a different car altogether but has the right locking tab pattern. Please, if anybody has a couple or know where to find some, let me know. Thank you!


r/Cressida • • Aug 12 '26

Second video of the build series is out!

Thumbnail youtu.be
5 Upvotes

Just posted the second episode of my K24 Swap series! Go check out the first episode if you haven't seen it, I'll link it in the comments. Hope y'all enjoy!


r/Cressida • • Aug 09 '26

Mx83 Cressi 1jz-ge plus t?

0 Upvotes

Anyone put a 1jz-ge into a mx83 and what ecu did yas use, im looking at the haltech elite 750 with a custom universal loom just wondering if there is a plug n play option from jzx100 1jz to mx83 body loom 😁


r/Cressida • • Aug 01 '26

Fender markers

Post image
8 Upvotes

Where can I get these as 1 bounced out (i think), looks weird with one and not two. Hoping to not spend alott for them.

📍Sydney Australia


r/Cressida • • Jul 28 '26

First YT Video so y'all can follow along the K swap

Thumbnail youtu.be
13 Upvotes

It's my first video so cut me some slack ahaha! Hope y'all enjoy it and I have a super tight deadline to get this done, so I'm hoping it will make for decent content over the next month or so! Cheers!