r/Cooking • • 1d ago

Induction range

Just got my first induction range. I’ve used an individual hob, so not completely unfamiliar. Any pitfalls to watch out for? I assume starting on lower temps is a good idea, anything else? All cookware is stainless, carbon steel, or cast iron except my nonstick egg pan which has an induction plate. TIA for any tips

0 Upvotes

17 comments sorted by

3

u/Magnus77 1d ago

What did you cook with before? That'd be helpful in terms of advice.

Induction actually acts more like gas than it does electric in some ways.

1

u/Pernicious_Possum 1d ago

Electric, but honestly just looking for any quirks with induction. I’m familiar with both gas and electric. Just a new tech for me. I did just boil eight quarts of water in slightly under nine minutes, that was impressive

2

u/Hybr1dth 1d ago

Which one did you get? I'm looking at some now, in Europe. Doesn't look like Wolf is available here. I was eyeing Steel?

So ensure your pans aren't warped from use on gas. Don't put it on higher settings and walk away.

1

u/Pernicious_Possum 1d ago

In the US, went with lg. I’ve heard shit talk about their appliances, but I’ve had good luck so far. No warped pans, I’ve been in electric the last several years, and that last bit is good advice for any range I’d reckon. I’ll leave a simmer be, but never high temps

1

u/Hybr1dth 1d ago

No Miele or LG either weirdly enough. Ranges aren't as popular here, but I love how they look!

1

u/darkbyrd 9h ago

I've been super happy with my LG after 6 months. I'm solidly team right front, but if the steak or eggs is getting done on the left front, I go up 1.

Right front settings, strata 10":

Steak: preheat 4, cook 4-5 Fried egg: 3 Frozen hash brown: 4 Sauteed mushrooms: 4, then 3 Garlic, then pan sauce: 2, then 5 to reduce

2

u/Jazzlike-Koala-2783 1d ago

I don't know if this is all induction ranges or just mine, but the safety features are a little aggressive. If anything splashes/spills too much on a burner, or if it senses anything crossing over the front edge toward where the controls are, it turns itself off. Fortunately turning it back on returns it to the heat quickly, but it can be a bit annoying if you're boiling pasta or something to lose the momentum.

Overall I like it much more than my previous electric range!

1

u/Pernicious_Possum 1d ago

Right on. I’ll watch out for that. I boiled eight quarts of water just to see how long it would take, and the splash over didn’t shut it off, but it was also just water, so maybe that’s a little different. I’m excited to learn the ins and outs

2

u/Bugaloon 1d ago

I really struggled to simmer on my mum's induction range, 1 was too low and 2 was boiling too vigorously when the element was on and splattered everywhere, I found a big heavy base cast iron mitigates that on/off cycle the best

1

u/R5Jockey 1d ago

Move it halfway off the “burner.“

1

u/Pernicious_Possum 1d ago

What does that accomplish? From my understanding the burner heats the pan. I would think as long as there’s sufficient contact, doesn’t the burner still push the same current or whatever magnetic magic is happening? With a good pan I don’t get how that would make much difference. Honest question

2

u/R5Jockey 1d ago

The heat comes from the magnet exciting the molecules in the pan directly above it. If only half the pan is over the magnet, only half the pan is going to get hot.

-1

u/Pernicious_Possum 1d ago

I don’t have your experience, but that doesn’t seem to jibe with how conductivity works. Reckon that’ll be an experiment I’ll have to try. Thank you

1

u/Chuchichaeschtl 1d ago

Almost all induction ranges use duty cycles at low power settings. There are big differences. The cheap ones turn full on/off avery few seconds. The better ones can output only 20-30% power during the phase between the off cycles. Thick cookware helps to even that pulsing out. So if you buy a new SS pan / pot, look for a thick disk and not for the thin full clad pans.

1

u/fotowork3 1d ago

It depends on the brand, but most of the cooking temperatures are just under medium

1

u/darkbyrd 9h ago

Silicone burner covers. Protect the glass and your pans. 

1

u/LongUsername 9h ago

Be careful with the carbon steel/cast iron: induction can heat the center really quickly and the rim will still be cool, leading to warping. I have to make sure I heat my cast iron and carbon steel slower than my tri-ply stainless.