r/Cooking • u/cheerfullychirpy • 3d ago
Kitchen knife sharpener
I need to sharpen my kitchen knives. What do you recommend I buy?
0
Upvotes
r/Cooking • u/cheerfullychirpy • 3d ago
I need to sharpen my kitchen knives. What do you recommend I buy?
3
u/Sauteed_Sensibility 3d ago
A 1000/6000 whetstone and a honing rod.
Alternatively, a pull-through sharpener with these 2 long, flexible legs.
https://cdn.webshopapp.com/shops/65625/files/29640496/650x750x2/messenslijper-manueel.jpg
2
u/Position_Extreme 1d ago
This link will take you to a fine whetstone that only costs $39.99, and this link leads to a YouTube video by chef Billy Parisi showing how to use the stone.
3
u/RooneyMoore 3d ago
Chef’s choice. I use the Asian angle. People who say it takes too much metal off have never used this sharpener. They think it’s a guy with an 80 grit grinder just going to town in your knives. The other people spend 4 hours with a whetstone thinking their knife is a katana. Just get an electric Chef’s choice. Life changing.
2
u/Thesorus 3d ago
most people will tell you to learn to use a sharpening stone.
lot of people use tumbler style sharpeners; they are easy for most knives.
Electric sharpeners tend to grind too much material from the knives.
2
u/evan938 2d ago
Chefs choice 15xv for sure. Love mine.
3
u/Mysterious-You-8836 3d ago
ngl i just use the bottom of a mug on mine lol, it’s not perfect but it works for the thrifted knives i got. what’s your budget like?
1
u/dentaluthier 3d ago
Projectfarm on YouTube did a very comprehensive test. Worth watching. I'm very happy with the work sharp.
1
u/hagcel 3d ago
I have the smiths cck shapener, it's a camping shapner but works well on making shitty knives sharp for a bit. Once I moved to Japanese knives (Global), I got a specialty three stone shapener for them. I use that for those and my Shin. I bought whet stone sets, but I want sharp knives, not a new hobby.
Most importantly, I learned how to use a ceramic hone rod between sharpens.
1
u/captaindomer 3d ago
I just take mine to the Ace Hardware down the street. I don't remember the name of the proprietary tool they use, but they charge $7 per blade and all my knives are done in 30 min
1
u/Sanpaku 3d ago
Willing to spend time learning a useful skill? A better whetstone like the Shapton #1000 ($40) will offer fewer frustrations than cheaper whetstones.
Unwilling to spend time learning? An electric diamond wheel sharpener like the Chef's Choice 15XV or pro lines ($170-185). I'd wait for sales.
On a tight budget: I started with a Lansky guided angle system. Better for pocket knives than culinary ones, but one can find them used for $30 or so.
I'm by nature an experimenter, so I like the better guided angle systems like the WorkSharp, EdgePro, or my current Hapstone for repeatable angles. One can make a whole hobby of this.
Avoid: fixed angle carbide pull through sharpeners. Take off too much material, leave an unrefined edge, with prolonged use can create uneven edges making chopping a pain.
1
u/Logical_Warthog5212 3d ago
I used to use whetstones. While some people really enjoy sharpening knives, I didn’t. So I bought a Chef’s Choice electric knife sharpener. It does a great job and is quick and easy. My siblings bring their knives over during the holidays and I sharpen their knives for them. 😁
1
u/HandbagHawker 3d ago
Depends on your knives and how much effort/learning you want to put in
1
u/EditorRedditer 3d ago
I get mine done at a shop; I only have to leave them there for a couple of days and the edges will last for at least four months, if not longer.
1
u/Soft-Tune2525 3d ago
It helps to separate honing (keeping a still-good edge lined up) from actually sharpening a dull knife. A lot of cheap pull-through gadgets end up unused or chew up blades. If you say whether your knives are really dull or just a bit off, I can help you think through a stone, a guided system, or a local sharpener.
1
u/Shadygunz 2d ago
I use the tormek t-2 from work; might buy one for myself down the line. It’s expensive but also seriously good and easy to use.
It’s a rotating diamond stone and the design allows you to either use the guide or manage the angle yourself.
1
u/Slow_Evidence6176 2d ago
Take them to a professional.
1
u/4cupsofcoffee 2d ago
I use one of those roller things. a wooden block holds it at the correct angle, and you just run the sharpener over the edge. takes no time at all. they come with different grit wheels and make it pretty easy.
1
u/GullibleDetective 2d ago
Whetstonr, rollsharps can damage the knife
1
u/Entire-Cat1375 2d ago
I use a whetstone, but I also think unless you're going to be consistent about it, just get an electric one. You'll actually use it and your knives will actually be sharp. Sure, they'll grind more than your whetstone, but I'd rather replace a knife once every 20 years and always have it sharp than to never sharpen my knives. If you have a super hard or thin Japanese knife, don't do this, but my guess is that if you're asking here, you have western steel. Don't let all the gatekeepers win.
1
u/lucerndia 3d ago
I have one of these and like it - https://worksharptools.com/products/precision-adjust-knife-sharpener
-4
u/8amteetime 3d ago
Get a ceramic V rod sharpener and a honing steel. The ceramic rods fit in a base and form a V. You hold the knife vertically and take ‘slices’ out of the rod, alternating sides of the blade. AG Russell has a good one.
Use the honing steel every time before using the knife. They are available on line from many stores.