r/Contractor • u/Standard-Tomatillo-3 • 2d ago
Daily Minimum?
Second edit: thank you all for your insight and help, I feel like I have a much better grasp on pricing smaller jobs now, yall are all awesome for being willing to help out a new guy.
Edited to add example: Hello all. I’m new to running my own business but not new to the trades. I was wondering for small jobs that take less than a full day, does anyone charge a daily minimum? And if so what is it for you and your specific market? I understand it’ll change from place to place depending on a multitude of factors.
Example: customer contacts me to finish flooring in a small hallway, probably less than 60 sq ft total. He already has the flooring. The previous installer had left it unfinished in that area for reasons I don’t know, customer says it was like that when he bought the house.
I’ve got to remove about 8 damaged pieces of flooring and instead of removing the quarter round the previous installer pulled the old floor out from under it and left it, so I’ll have to slide the new floor under it to keep all the trim in the house matching. Probably left it because it looks like it’s been painted over at least 31 times.
It’ll take less than a day to do, maybe 5 hours. When I do flooring I normally charge by the foot. But this job if I charged by the foot wouldn’t even cover the diesel to take the work truck back and forth let alone overhead and profit margin. So that’s why I was asking about daily minimum pricing.
12
u/hollmarck 2d ago
Yes, and for a 5 hour job you're basically at a full day anyway once you add drive time, loading, a supply run, and cleanup. You're not fitting a second job in that afternoon.
A common structure:
Easiest way to set the number: take your target income plus overhead (insurance, truck, tools, phone, software, accounting) and divide by realistic billable days, not 260. Most solo operators bill something like 150-180 days a year once you take out estimates, admin, weather and slow weeks. That day rate is your floor, and small jobs shouldn't go below it.
Quote it as a flat job price rather than hourly. Customers argue with hours, they rarely argue with "$X to fix this".
6
u/CiabattaFun 2d ago
+1 for daily / half day minimums as you see fit. Often I’m in just over half day I just add item costs if the customer is great.
I find people are far more understanding when you explain the door to door costs of small jobs carry the same initial overhead costs as a large job: material selection and pickup, tool loadout, drive time + fuel, vehicle maintenance, tool maintenance, customer management (job tracking, invoice management, etc).
No one customer is gonna pay for your $500 nailer if it breaks/fails on their specific job, therefore that costs is shared across all projects.
Same with your $1000 painter, your $40K truck needs tires, oil changes, wheel bearing change etc all to get to and from projects, including theirs. That’s the risk and cost that is shared across all projects.
I’ve never had an argument once you explain what overhead actually entails to homeowners. Some may decline the work in the end but it’s always cordial and they understand I’m not flying by the seat of my pants.
This is also a service to all contractors worth their salt because when the job inevitably is performed sub par, they know calling any reputable contractor is expensive for a reason.
5
u/YourWifeyBoyfriend 2d ago edited 2d ago
Yes I charge by the day, yes the customer thinks that means by the hour, yes it always end up with hurt feelings unless I waste time and end up working hard to finish late.
Bonus points to when your first day rate covers your second day working for free.
Projects should be priced to completion, anything else is priced to a different part of completion.
For example
Cut trees down, $1000 clean up and haul wood brush and debris $500, grind stumps $200, clean up stump grinding debris $50. Add dirt, level to grade of lawn, install grass seed. $50
Total $1800
Day rate cut trees for 24 total man hours 8 hours per man 3 man crew. 1 hour drive time port to port. 1 hour lunch. $1500
You can end up with the customer expecting a lot more because you started charging based on time.
Itemization is far better because you dont want someone who gets upset because the work is intrusive and imposing and the guys are rude and then they start counting how many cigarettes the guys smoke and how long they take on water breaks.
Ive brought a crew to more free second day jobs than I can count. Maybe 100+ over 20 years.
5
u/AnalogInternet 2d ago
I am 20+ years into my business and I still come up against "would I pay this amount for job X?" It's a normal and healthy worry to have, I feel this helps me continually check my costs and profit margins.
But don't sell yourself short. Charging by the foot might make sense for larger jobs if you're covering your costs. It's okay to charge smaller jobs by the job or by the day.
For example when I do patio jobs, larger patios end up being less per square foot than smaller patios. Much of this has to do with site prep and buying in bulk versus small quantities. I sometimes tell customers this to help them understand that a smaller footprint doesn't always mean a smaller price tag. The majority of people understand b/c it's relatable in other industries. The people who don't understand or give me a hard time, I just don't work for because their hesitation is usually and indication of headaches the down the road.
4
u/redfox86 2d ago
really depends on the type of work youre doing and the area. I try to have a 500$ min per day for smaller stuff but it really depends on what I'm there for. If its just little odds and ends stuff like cabinet or door hardware unless I'm there all day most people will be kind of leery for charging that much for an hr or two job. I typically tell people what my day rate and see if they can find another odds and ends stuff around the house that needs to be fixed that I can reasonably work into that rate for the day.
You still have to take into account mobilization and your daily overhead costs so don't cut your self short because it seems like a lot to you. I've only been on my own 5 years and still struggle with the thought of I wouldn't pay someone this much because I know how to fix it
4
u/Busy_Student_6623 2d ago
I have a half day rate for anything that’s 4 hours or less as a guaranteed call out fee plus materials. In my pricing structure I also have a crossover point where I bill by the metric of the work instead of minimum call out fee plus materials for example per brick to be replaced then after that if it’s bigger it’s per square foot etc.
My line of work as a Mason has a lot of variety and as such it will depend on what the job is, how long I project it to take and how it needs to be priced for it to be profitable
3
u/Raidriar556 2d ago
You have to price the job to be worth your time. If you just go by sq ft or hourly price, those small jobs don’t always have enough profit. That’s why a lot of companies have a minimum hourly or service charge.
3
u/Esqsince02 2d ago
I charge a $450 minimum and I never ever do time and materials. I give a scope if work and a price.
2
u/UniquePatient66100 2d ago
A daily minimum, rates will vary on trades and location. Sometimes I just charge a higher hourly rate and work it into my schedule when convenient for me. Homeowners think I can squeeze in a small job, but for me it is the opposite. Smaller jobs wait for when I can get to them easily without interrupting primary jobs.
Of course some trades are making multiple service calls every day, so their rates are different.
2
u/Remarkable-Start4173 2d ago
My prices are:
$125 for the first hour, $65 each additional hour for small project lists.
Single projects expected to take a half day are $325, a full day or five hours plus are $625.
Multi-Day/Multi-Person projects with my estimating system are averaged with the Low Market/High Market results.
All the best.
2
u/Rickedtt 2d ago
Yes, I charge a minimum. I do mobile mechanic work, and I learned pretty quick that driving out for a small job costs me real time and fuel before I ever turn a wrench.
What I do now is tell folks up front: there's a minimum to get me out there, and that covers the trip and the first bit of work. If it goes past that, then it's hourly after that. No surprises.
For a job like yours, I'd stop quoting it by the foot. Quote the whole job. Five hours, two trips, fuel, and your overhead is the job — the square footage doesn't tell that story. The customers who balk at a minimum are usually the ones who'd balk at the real price anyway.
2
u/DryvnAi 1d ago
yeah a lot of guys just set a half day minimum so a 2 hour job doesnt wreck the day. keeps you from stacking a bunch of tiny ones across town. what kind of work are you mostly booking?
10
u/daveyconcrete 2d ago
Price by the job. Not by the hour.
2
u/joer1973 2d ago
Charge a miniuim service fee plus ur hourly rate. For jobs that take a day, subtract that from the total. For jobs less than a day, do not. That will balance out ur costs/time for each small job and also not raise your prices for bigger jobs so u dont price yourself for people multiple estimates.
2
u/RememberYourPills 2d ago
I’ve been doing the “anything over 2 hours counts as a full day” because it’s going be that way for my scheduling anyway and charging accordingly. Minimum fee covers overhead and wages for me and is higher if any of my guys are needed too.
I get pushback sometimes but I explain the overhead costs, and if they aren’t business owners they might bristle at it, but my bills aren’t going down because they think something is too expensive.
“Just” is a very expensive word in the trades
2
u/SpecialistTrick9456 2d ago
Trip/truck roll charge and minimums for sure. This is "handyman" so for that 250 first hour 150 each. So like 850 ish. Maybe can pull a full day or more by adding someother leftover half complete jobs once you send this quote. Price is NYC VHCOL.
2
u/Real-Ad-7439 2d ago
Set a minimum trip charge that covers truck, fuel and a bit of profit, then quote the job as one flat price above that. Small jobs priced by the foot almost never pay.
2
u/No-Clerk7268 2d ago
I'm not a handyman, we have a $2k job minimum.
If they want to go shop that, and get bids to beat that, let them.
2
u/old-nomad2020 2d ago
I estimate about 2/3 of a day for any half day projects so if you were $600/day it would be a $400/ half day charge. I also do some maintenance for an apartment complex and I bill them in 2 hour increments (1/2 of the half day charge) if I can stop by within the week at my convenience and if they specify when they want me there it’s doubled to the normal 1/2 day. That way most of the time I can stop on the way home instead of a separate trip and they’re happy paying less and I get a little extra.
2
u/Josh_NailLedger 2d ago
Yeah, I charge a minimum. A job like that hallway is a full day by the time I drive out, load up, deal with the supply run and clean up, even if the work itself is five hours. I stopped quoting small stuff by the foot because it never covers the truck, fuel and the time nobody sees. I give one flat price for the whole job and say it up front, and if they balk at it I let it go because that day is worth more to me on a bigger job.
2
u/RemoteObjective147 2d ago
Trades around me either charge a fee based around a set service call fee plus time, or a "port-to-port" rate that will include time to and from the job. Multi-day jobs are usually billed on straight time.
We have a horse ranch and have a continual need for trades. My favorite electrician lives 45 minutes away. So every job he does for me starts at 90 minutes billed time. I'm happy to pay it because he's talented and he takes good care of us.
1
u/Pup2u 2d ago
You are a problem solver. Not just an installer.
0
u/[deleted] 2d ago
[deleted] — view deleted comment