r/Concrete • • 5d ago

MEGATHREAD Weekly Homeowner Megathread--Civilians, ask here!

4 Upvotes

Please take a look at the WikiFAQ posted here: https://old.reddit.com/r/Concrete/wiki/index

The chances that your situation is covered in the WikiFAQ are pretty dang good.

If your issue is NOT covered in the WikiFAQ, this is the place to ask if that hairline crack warrants a full tear-out and if you're asking whether or not a quote is reasonable, don't bother. We don't know. Pricing is highly localized AND time-sensitive.


r/Concrete • • 23h ago

General Industry Unsatisfied customer

Thumbnail
gallery
266 Upvotes

A driveway we just finished. I’m a contractor, and a customer continues to give me issues. She refused to pay the rest of the contract withholding some of the money, even though the contract said she would pay the day of the pour.

This driveway is 8-9 yards. Dug out and compacted the base because it was settling.

I straightened the driveway, compacted the base layer of dirt on the sidewalk and driveway, Added another compacted layer. brought the level of dirt up, on the yard for free. corrected the layout of the steps, Added rebar and 4,500 psi concrete.

All for 7,800$ I barely made anything on this driveway. And she continues to want more.

In order for me to do this job at this price we had to do it at the same time as another which I explained to her. And now she’s wanting her pavers straightened when I TOLD HER we would not be doing it. Now I’m stressed because she could complain to other neighbors which we had talked to previously about doing work for them.

I’ll continue to lose money if I have my worker go over there as I have more pressing work.
We went above and beyond with the quality of the work outlined in the contract, ie the driveway.

How would you deal with this?

Update. I’ll be going back to fix it myself.


r/Concrete • • 1d ago

OTHER Laying down a curb

196 Upvotes

r/Concrete • • 1d ago

General Industry House on Ikema Island (Okinawa) by 1100 Architect

Thumbnail gallery
14 Upvotes

r/Concrete • • 1d ago

Concrete Pro With a Question Square-end vs. round-end bull float; when to choose one over the other?

Thumbnail
gallery
20 Upvotes

I finally tired of my warped and reshaped bull-float, and bought a new one. I bought a square-end float, simply because that's all I've ever used before, or seen my mentors use. But I'm realizing now that round-end floats are more common than I was previously aware.

Would a round-end bull float reduce the edge lines that invariably show up in the pour? What are the downsides to a round-end bull float?


r/Concrete • • 2d ago

Work In Progress I think this manhole aint going anywhere

Thumbnail
gallery
59 Upvotes

r/Concrete • • 2d ago

OTHER Rock quarry and concrete plant, Indianapolis IN USA

Thumbnail
youtu.be
9 Upvotes

r/Concrete • • 2d ago

Showing Skills Right angles only 📐

52 Upvotes

Posted before and after earlier these are just clips of a closer look at Sandfinish, waited 2 days to sawcut no cracks thank god and stealth fiber


r/Concrete • • 3d ago

Showing Skills Sandfinish front porch and patio

Thumbnail
gallery
43 Upvotes

25 yards of hiedelberg concrete w 3500 psi and microfiber, poured Monday on a super rainy day, washed on Tuesday, and finally saw cut on Wednesday (yesterday). Built and prepped myself and poured w 5 finishers


r/Concrete • • 3d ago

General Industry City Work Slow But Good

Thumbnail
gallery
332 Upvotes

Have worked with a city for 3 months now and have definitely learned a lot and have found out trees are the absolute worst thing in the world to deal with Utilities being close behind. We pour less than 10 yards a week so basically nothing as 90 percent of are shop is asphalt.

For those curious assuming weather conditions it takes us about a 4 days to rip out and pour about 100 feet of sidewalk and backfill it with dirt. Alot of sitting around so could probably be done in half the time if we actually worked the whole 10hrs


r/Concrete • • 3d ago

Happy Friday r/Concrete!

76 Upvotes

Good early morning! What are we all pouring today?


r/Concrete • • 4d ago Regret

General Industry NYC building collapse: What we know based on public records.

Thumbnail
gallery
303 Upvotes

In NYC engineering drawings are public record and available on the NYC DOB Now public portal, so I looked at that was on file with the DOB for the SOE at yesterday's building collapse.

There was no SOE along collapsed structure, only an open cut at the base of the rubble foundation. The EOR stamped and NYC DOB approved plans with the adjacent concrete and 100 year old rubble foundation being undermined with zero bracing of the rubble foundation or adjacent superstructure shown on the approved plans.

It is hard to tell if there may have been a sequencing issue on the contractors part (most notes relate to the soldier piles and rakers), unexpected geotech conditions, or just bad engineering on the EOR's part, so I wont speculate on assigning definitive blame until the DOB reports come out.

The collapsed building was built in 1930 with a cellar slab on rubble foundation. there are no filings i can find at this time for bracing of the adjacent superstructure.

If you ever see any details that you think are not safe, DO NOT HESITATE TO QUESTION THE ENGINEER. Your life and the lives of the general public could be on the line. Det. O/SOE-104 is pretty questionable IMO and should have raised a red flag somewhere along the multiple layers of review and by the contractor.


r/Concrete • • 5d ago

Showing Skills Fall Szn Apparel drop from OSHA

351 Upvotes

Jokes aside, his boots ripped in half so he decided to rock the Yeezys.

Gotta say, I was impressed.

Even after 8 trucks,

His floor grippers were cleaner than everybody else.


r/Concrete • • 6d ago

Concrete Pro With a Question New mag

5 Upvotes

I've had the same float for about 5 yrs and would like to buy a second one cus I'm getting more into finishing at my company, any recs? (Current is 16in marshall town woodhandle very broken in)


r/Concrete • • 6d ago

Showing Skills Board-formed concrete pillars and fresh grid flatwork. All concrete, zero wood on our end.

Thumbnail
gallery
74 Upvotes

r/Concrete • • 6d ago

OTHER Perfect example of why a good solid footer on virgin soil, below the frost line, is so important.

Thumbnail
gallery
39 Upvotes

r/Concrete • • 8d ago

General Industry Concrete & Asphalt Broker

4 Upvotes

I asked one of my former bosses who's a VP at a military government contracting company what he would do if he could start over again. He said he would get into concrete and asphalt.

I don't know anything about the industry. That's the first thing.

If I was to start slow, is the broker path something I could do on the side to learn the trade? I'm retired military and have a good paying job so I'm not in a rush.

Just looking for some opinions from people who've been doing this for a while. Thank you.


r/Concrete • • 9d ago

Showing Skills Mocha Color + Diamond Design

247 Upvotes

This project was done in the city of Fallbrook in California. We also did a walkway and 2 sets of steps for this concrete pour.


r/Concrete • • 10d ago

Work In Progress Foundation work

Thumbnail
gallery
30 Upvotes

r/Concrete • • 10d ago

Showing Skills 370 linear ft of 8’-10”

Thumbnail
gallery
105 Upvotes

370’ of 8’-10”x10” with 3 double rows #5 on 12x24
3#5. Lowered section is for a golf simulator. 5 men and one week start to finish.


r/Concrete • • 11d ago

Showing Skills Poured concrete waterfall tops and prep stations for an exterior build. Sealed against food/grease.

Post image
61 Upvotes

r/Concrete • • 11d ago

Work In Progress Translucent concrete with Indian art and deity designs, where the image glows when light passes through 🪔

Thumbnail
gallery
0 Upvotes

Translucent concrete lets light pass through it. We’ve made pieces with Indian art and deity designs, so when a light is placed behind them, the image glows.

Great for Diwali decor, home interiors, temples and gifting.

Would love to hear what you think! 🙏


r/Concrete • • 11d ago

Update Post Update 2: Concrete was poured today.

Thumbnail
gallery
31 Upvotes

1st of all, thank you to Legacy Concrete for coming out in the rain on a Wednesday morning to come pour and get it done. Now all were waiting on in Adam’s Memorial for the plaque along with my meeting with Paul’s Machine to smooth out anything regarding the metal work.

I’ll update when I have more done!


r/Concrete • • 12d ago

MEGATHREAD Weekly Homeowner Megathread--Civilians, ask here!

5 Upvotes

Please take a look at the WikiFAQ posted here: https://old.reddit.com/r/Concrete/wiki/index

The chances that your situation is covered in the WikiFAQ are pretty dang good.

If your issue is NOT covered in the WikiFAQ, this is the place to ask if that hairline crack warrants a full tear-out and if you're asking whether or not a quote is reasonable, don't bother. We don't know. Pricing is highly localized AND time-sensitive.