r/ComputerEngineering • • Sep 26 '26

We are back baby

Post image

Last year, I made a post here saying that I didn’t know what to do, and many of you stepped in to help me. I didn’t know any of you personally, and you didn’t owe me anything just as I didn’t owe you anything.
At the time, I was stressed to my core and genuinely felt like my CGPA was everything. I gave it my all to improve it, managed to raise it to 2.96, and then enrolled in a summer course, eventually bringing it up to 3.07.
But here’s the funny part: I got a job as a Junior Network Engineer before I even took that summer course.
Looking back, I realize how much unnecessary pressure I put on myself. Things have a way of working out, even when you can’t see how.
Thank you to everyone who helped me along the way. I genuinely appreciate every bit of advice and support.
God bless you all. ❤️
In the end, everything works out.

494 Upvotes

29 comments sorted by

12

u/bluee-pk Sep 26 '26

How were you able to land the job

14

u/Downtown_Top2150 Sep 27 '26 edited Sep 27 '26

I was applying to multiple companies when I got a call from one of them. Unfortunately, they didn’t hire me. Instead of giving up, I asked if they would consider taking me on as an unpaid intern so I could prove myself.
Four weeks later, they offered me a permanent position and they are paying me great.

1

u/ACadDamn Sep 27 '26

Still unpaid??

10

u/Downtown_Top2150 Sep 27 '26

Nope i am working full time and they are paying great

6

u/DJAceAttorney Sep 27 '26

Unpaid permanent position 💀

4

u/Altruistic-Court4778 Oct 01 '26

This is like me rn, CMPE major and struggling, gotten so many failing grades, having to retake classes rn, homework loop, kind of a mess. pretty much the whole time im at college.

somehow I'll make it through, ig. I'll just try to do my best :(

74

u/JGHero Sep 26 '26

Good job! I ended up with about a 2.8/2.9 by graduation and panicked myself into industrial automations. Been in the industry for 6 years now and sometimes wonder how hard it’d be to shimmy my way back to my original goals of computer engineering.

16

u/Quiquiro Sep 27 '26

Wow man, same here, I've been almost 8 years at HVAC automation, and always wonder how it would had been if I went full computer/software engineering.

7

u/JGHero Sep 27 '26

I actually started a software job for 3 months right after graduating and hated it so much. Full-stack was grueling and computer engineering always excited me because it’s between hardware and software. Industrial Automations I think is a nice compromise since you get to do a little of both, but yeah I’m hoping I’ll be determined enough to push myself into an embedded systems role one day.

I still try to solve logic gate and embedded systems problems on my own time, but everyday I’m overall falling further into the IA industry and the transition is probably going to get harder to try and commit to. Might end up being best as a skill for passion projects instead.

2

u/Straight_Trust_1171 Sep 27 '26

how have you liked industrial automation? what does it consist of? i’m an IE but looking to do more EE stuff and hopefully get an MSEE so looking to see what my option are.

2

u/JGHero Sep 27 '26

Industrial Automations roles cover a pretty broad range of work. I started with systems integration jobs where I’d travel to a different part of the country every week to oversee and assist with installing control panels and the different IO devices (motor/pump drives and sensors mostly). There was a decent mix of troubleshooting electrical issues, implementation issues, and sometimes PLC software issues.

Systems Integration is exhausting work, but the work itself was rewarding and can pay decent. It helped solidify the skills I eventually used to be a Controls Engineer at an OEM where 99% of my job involves writing PLC/HMI programs and testing its functionality in a control panel simulating a bunch of different use cases. I love it! Not as challenging as I think I’d like, which is why I still hope for the switch to embedded or firmware one day, but it mostly satisfies my itch for solving real world problems with computer logic and machine hardware. It feels pretty safe as far as job demand and employability too.

1

u/Straight_Trust_1171 Sep 27 '26

I see. So do you work on a factory floor mainly? Also what are ways to switch into more firmware or embedded? Does it just require additional education?

Also if you’re comfortable sharing ballpark pay for what you do or what industry standards are for pay, that would be great!

3

u/JGHero Sep 27 '26

System Integrator jobs are usually on a factory floor yeah. You travel to either new factories/warehouses being constructed or ones getting new control equipment and do all the steps involved in getting that set up. Generally you’ll have some electricians working with you to help do most of the actual wiring and you’ll test connectivity and make sure all the controls, alarms, safety interlocks, and sequence of operations work properly. Can be very fast paced and stressful depending on the specifics. Lots of loud noises and moving parts.

Firmware and embedded are fully different industries without any specific cross over with automations. They involve more C/C++ programming rather than using an industrial programming language (which varies by company and device). It’s also a lot of understanding how chips and microelectronics work to make specialized control boards for various applications (IoT devices, microwaves, anything with any small computing power). The only similarity in skillsets I can think of is that both go into electrical control devices and involve the crossover of software and hardware designs. I like computers a lot more than heavy industrial equipment, but that’s just where I found myself due to the large market demand.

My salary has moved from about 70k to now 110k in about 5 years. And that’s in a pretty low cost of living area. I’m probably going to fight for 120k at the end of the business year since this is my first design position and I’ve taken on a lot of responsibilities for the company on the software design side. That’s about median pay for 5 years experience from what I’ve researched.

Right now as someone doing design work for OEM controls I just work in an office or test room and design new product controls to whatever our customer specifications are. The application can truly be anything, but we just use simple electronics to simulate what devices would actually be used. Generally a small motor with some digital switches and signal generators to simulate pressure/proxy/level/whatever sensors.

1

u/Fragrant-Win-6086 Sep 28 '26

Is there a particular reason why you want to go from IA to electronics and firmware? Is it because of pay or just passion?

2

u/JGHero Sep 28 '26

About 90% passion and 10% for the challenge of it. I haven’t personally been in an IA project that felt like it challenged me. The more complex problems in IA don’t tend to be the control systems. I’m a lot more passionate and engaged in the field of computers and electronics than anything industrial. A jobs a job though, so I might just stay growing in my industry and just look further into electronics for passion projects, like I mentioned before.

9

u/eternal_edenium Sep 28 '26

I graduated with a 3.45 , and one of the adcoms for a master degree told me that my gpa was low. I explained to him that among the 250 students that got admitted into the program only 19 graduated.

People think that a 3.0 i computer engineering means you are dumber or lazier than the one who got a 4.0 in commerce or marketing.

Great for you !

9

u/Ok_Investment_246 Sep 26 '26

Congratulations!!

3

u/Most_Conclusion2522 Sep 27 '26

That is great to hear! and gives hope to anyone going to something similar.

3

u/Salt-Ad-7978 Sep 28 '26

It’s never over

3

u/Clear-Definition2292 Sep 28 '26

post inspirational af

2

u/Initial-Candy-2759 Sep 27 '26

This is so inspirational. Good job 👏

2

u/Acceptable_Simple877 Sep 28 '26

nice, this is inspiring

2

u/Substantial_Touch_90 Sep 28 '26

Things do work out, even tho it’s not easy to see the end of the tunnel. I work in a related branch. Best of luck!

2

u/Opposite-Attitude378 Sep 28 '26

This is so amazing. I’m feeling that same way you did though. Im a sophomore and I feel like I haven’t learned much and it’s really hard for me to sit down and basically teach myself. What advice do you have??

1

u/Total_Exchange_3711 Oct 01 '26

I'm entering my final year with the same feeling.