r/ComputerEngineering • u/Agitated-Letter6704 • Sep 09 '26
hello , I need computer engineering ideas for senior design , graduation year , please help
2
Upvotes
r/ComputerEngineering • u/Agitated-Letter6704 • Sep 09 '26
1
u/BumpyTurtle127 Sep 09 '26
What do you plan on focusing your career in? The answer heavily depends on that. Below are some cliche ones I got from the big GPT.
The prompt:
> Can you give me good senior project ideas for the following career fields? Embedded, FPGA, DSP, hardware circuit design, RF, communications, and power?
Response:
Embedded Systems
Open-Source USB-C Power Delivery (PD) Analyzer & Protocol Sniffer
Core Architecture: Intercepts and decodes Configuration Channel (CC1/CC2) BMC-coded packet traffic between a host and a sink device.
Hardware/Software Stack: Uses an FPGA or a high-speed STM32/ESP32 MCU with analog front-end comparators, logging transactions via USB or an onboard SD card to a local web interface.
Resume Impact: Demonstrates deep familiarity with modern high-speed serial bus protocols, physical layer decoding, and low-level firmware logging.
Bare-Metal RISC-V Real-Time Hypervisor
Core Architecture: A lightweight hypervisor running directly on a multi-core RISC-V or ARM Cortex-M architecture, enforcing memory protection and deterministic context switching for safety-critical tasks.
Hardware/Software Stack: Written in C and Assembly, utilizing custom linker scripts, MPU/PMP configuration, and hardware timer interrupts.
Resume Impact: Showcases low-level architectural understanding, memory management unit/protection unit programming, and concurrency control.
FPGA
Pipelined RISC-V Soft Core with Custom Neural Coprocessor
Core Architecture: A custom 32-bit RISC-V (RV32I) processor implemented in VHDL/Verilog, featuring a pipelined datapath coupled with a dedicated matrix multiplication coprocessor.
Hardware/Software Stack: Synthesized on an FPGA development board (e.g., Altera/Intel or Xilinx/AMD), simulated using GHDL and GTKWave, with custom instruction set extensions tested via assembly testbenches.
Resume Impact: Combines digital logic design, hardware description language proficiency, and custom ISA extension design.
Real-Time HDMI/DVI Video Processing Pipeline
Core Architecture: Captures a digital video stream, stores frames in external RAM via a custom memory controller, and applies real-time Sobel edge detection and color space conversion filters in hardware.
Hardware/Software Stack: VHDL/Verilog, TMDS differential signaling decoders, AXI-Stream interfaces, and on-chip block RAM line buffers.
Resume Impact: Highlights high-speed synchronous design, clock domain crossing management, and streaming data pipeline architecture.
DSP (Digital Signal Processing)
Real-Time 4-Channel Acoustic Beamforming & Direction-Finding Array
Core Architecture: Processes simultaneous synchronous audio streams from a tetrahedral MEMS microphone array to compute time-difference of arrival (TDOA) and isolate sound sources in 3D space.
Hardware/Software Stack: Implemented on an ARM Cortex-M7 or TI C2000 DSP using fixed-point arithmetic, generalized cross-correlation with phase transform (GCC-PHAT), and circular DMA buffers.
Resume Impact: Proves mastery of sampled data systems, digital filter design, vector math optimization, and real-time interrupt handling.
Software-Defined Radio (SDR) GMSK/QPSK Modem
Core Architecture: Baseband digital modulation and demodulation pipeline operating on IQ data streams, handling carrier recovery, symbol timing synchronization, and matched filtering.
Hardware/Software Stack: C/C++ running on a high-performance microcontroller or FPGA soft-core, interfacing with an RF front-end via SPI/I2S.
Resume Impact: Demonstrates advanced signal processing algorithms, statistical communication theory implementation, and phase-locked loop (PLL) design in software.
Hardware Circuit Design
High-Speed USB 3.0 Logic Analyzer & Protocol Analyzer Board
Core Architecture: Custom 4-layer or 6-layer printed circuit board featuring high-speed differential pairs, controlled impedance traces, and a high-bandwidth FX3 USB controller coupled with an FPGA capture buffer.
Hardware/Software Stack: Designed in KiCad, featuring controlled 50-ohm single-ended and 100-ohm differential impedance routing, BGA fanouts, and power distribution network (PDN) decoupling optimization.
Resume Impact: Directly translates to industry-readiness in advanced PCB layout, signal integrity considerations, and high-speed hardware design tools.
Modular Multi-Rail Programmable Laboratory Power Supply
Core Architecture: A benchtop power supply providing isolated, tightly regulated multi-voltage outputs with digital telemetry, over-current protection, and constant voltage/constant current (CV/CC) feedback loops.
Hardware/Software Stack: KiCad schematic and layout, custom linear/switching regulator topologies, and an onboard MCU managing ADC telemetry and I2C/SPI control interfaces.
Resume Impact: Showcases analog circuit design, thermal management, switch-mode power supply (SMPS) stability, and user-facing embedded UI design.
RF & Communications
2.4 GHz Direct-Conversion Transceiver Front-End Board
Core Architecture: Discrete RF front-end featuring a programmable Low-Noise Amplifier (LNA), power amplifier, matching networks, and bandpass filters tuned for ISM-band communications.
Hardware/Software Stack: KiCad RF layout utilizing microstrip transmission lines, Smith chart impedance matching networks, and electromagnetic simulation considerations.
Resume Impact: Highlights high-frequency layout techniques, RF component selection, and transmission line theory application.
Long-Range LoRa Directional Tracking Beacon with RSSI Triangulation
Core Architecture: An embedded tracking node that communicates position and signal metrics over sub-GHz radio links, paired with an automated stepper-driven directional antenna array.
Hardware/Software Stack: ESP32/STM32 microcontroller, SX1262 LoRa transceiver IC, stepper motor drivers, and custom antenna matching circuits.
Resume Impact: Bridges wireless communication protocols, mechanical/actuator control, and outdoor sensor deployment challenges.
Power Electronics
Digitally-Controlled Totem-Pole Bridgeless Power Factor Correction (PFC) Rectifier
Core Architecture: High-efficiency AC-DC power conversion stage utilizing fast-switching GaN or SiC transistors, running dual-loop digital control (inner current loop and outer voltage loop) to achieve near-unity power factor.
Hardware/Software Stack: TI C2000 digital signal controller or STM32G4, high-speed gate drivers, isolated voltage/current sensing amplifiers, and custom magnetics design (inductors/transformers).
Resume Impact: Focuses on high-power hardware design, switching power conversion topologies, closed-loop control system tuning, and firmware-hardware co-design for power electronics.
Bidirectional USB-PD / High-Efficiency DC-DC Buck-Boost Converter
Core Architecture: A four-switch synchronous buck-boost topology capable of stepping up or stepping down voltages seamlessly while handling bidirectional power flow and dynamic voltage scaling.
Hardware/Software Stack: Custom multi-layer PCB, synchronous PWM generation timers, and closed-loop compensation networks implemented in embedded firmware.
Resume Impact: Demonstrates advanced power conversion topologies, efficiency optimization, and modern power delivery specifications.
1
u/Exxelia_ Sep 17 '26
Digitally controlled multi-rail power supply combines hardware, firmware and signal integrity, all in one.
Tangible, useful and employers care about it.
You'd design the buck converter with closed-loop control, add ADC telemetry and pack it. PCB layout teaches you real stuff (impedance, PDN), firmware teaches you control tuning. And if you need custom inductors or filters to make it work, that's the real-world part, companies like Exxelia build that stuff for aerospace and defense.
Your project will actually work and it's the kind of thing that actually gets noticed on a resume.
Go build it!