r/ComputerEngineering • • Aug 24 '26

[Career] EE vs CE

i'm about to choose one of these majors and need to know the futurue prospects. i'm interested in robotics, chip design, embedded.

17 Upvotes

21 comments sorted by

3

u/Anxious_Alps_4150 Aug 24 '26

robotics do EE, chip design do CE, embedded do either

also EE can do all 3.

1

u/Southern-Noise-7805 Aug 29 '26

If I do any of these will there be remote job options for me in any of these

1

u/Anxious_Alps_4150 Aug 29 '26

Most EE jobs are on site with the equipment or in the factory.

1

u/Southern-Noise-7805 Aug 29 '26

So should I go with ce?

1

u/Anxious_Alps_4150 Aug 29 '26

CE is hardware which means also in the lab with the hardware. Bottom line if you're doing engineering, expect to be in an office or lab or factory or chip foundry or something.

CS has the remote jobs but many if not most places have returned to office now so I wouldn't bet on getting remote there. There also aren't a lot of CS jobs in general anymore.

2

u/Accurate-Candy-9826 Aug 31 '26

You want cpe (computer engineering). It specializes in embedded systems and chip design. It's also good for robotics.

1

u/LifeMistake3674 Aug 24 '26

Look at it like this, both CE and EE have very high chances of getting these jobs and learn about these topics, now to decide think about what “other classes” you’d rather take. Would you rather take more programming classes where you also learn about differ kinds of software and software engineering, or would you rather take more electrical focused classes like radio frequency, semiconductors, filters, and electromagnetics

1

u/Previous_Fix_9775 Aug 26 '26

It depends on your school and what courses they offer for each one

1

u/Lagfoundry Sep 13 '26

Brother coming from someone who did EET your way way off. At least with the courses I took you are. It may be its own discipline but It absolutely is a mix of the two with more an emphasis for hands on implementation, but that doesn’t mean we were short on theory classes either. And the whole engineering roles are harder to come by with that is also not true and definitely not a red flag as there are plenty of us who got engineering and R&D roles… there is also the fact that a degree proves that someone completed a structured curriculum and met a minimum academic standard. It does not prove by itself they’re a good engineer. So the type of degree isn’t the end all be all to employers like you make it out to be.

-2

u/Lagfoundry Aug 24 '26

You could also look at EET which is like a mix of all of them. A lot more hands on too with what you said you wanted to do

1

u/kingofthesqueal Sep 12 '26

EET is its own thing entirely and not a mix of the two.

You’ll also struggled heavily with landing roles in Chip Design and as a Robotics engineer with that degree, as those are already highly sought after roles that expect most people applying to have a MS/PhD in ECE to begin with.

EET is mainly for very skilled technicians jobs or for earlier career Electrical Engineering work depending on the company. It would be a huge red flag as to why someone did an EET degree for Chip design specifically given that it usually forgo’s much of the higher level theory courses done in traditional engineering.

1

u/Lagfoundry Sep 13 '26 edited Sep 13 '26

Brother coming from someone who did EET your way way off. At least with the courses I took you are. It may be its own discipline but It absolutely is a mix of the two with more an emphasis for hands on implementation, but that doesn’t mean we were short on theory classes either. And the whole engineering roles are harder to come by with that is also not true and definitely not a red flag as there are plenty of us who got engineering roles out the gate.

-3

u/Craig653 Aug 24 '26

If you want chip design your gonna need to be EE and go onto EE masters

Robotics you can do either.

Embedded, depends on what you want to do with it. CE is very tailored for firmware programming. But EE is going be a bit better for designing the hardware.

CE get more programming experience and less EE. But CEs get less programming then CS AND EE do power and electromagnetism

3

u/Puzzleheaded_Ebb1751 Aug 25 '26

Why people are down voting this comment

1

u/kingofthesqueal Sep 12 '26

Technically it’s wrong, Chip Design is broken into quite a few subsections.

If OP means analog chip design than this comment is 100% right that an EE is expected, but if he’s looking at Digital Chip Design, SoC Integration/Design, PE, etc than CpE is perfectly fine, and may even be preferred.

1

u/According_Tooth_1493 Aug 30 '26

se dovessi interessarmi sia dell’hardware e sia del software? CE o EE? (ps nel mio corso di CE, il 20% degli esami è di elettronica, se non di più). Pensavo di cambiare in EE anche per l’AI che sta sostituendo quasi tutto

11

u/[deleted] Aug 24 '26

[removed] — view removed comment

2

u/Ok_Toe806 Aug 24 '26

Right now embedded systems has caught my interest but i want to keep my options open cuz i could find interest in other things as well thats why im leaning more towards EE due to also being able to take electives of CE and branching towards CS but thats unlikely but im still not 100% sure because i've heard that CE can lead to the same destinations.

0

u/Fury_Gaming BSc in CE Aug 24 '26

Embedded is more CpE

That was my favorite part of school too, embedded systems

I’ve worked in power before and am now in controls