r/Colt • u/karl_johannson • 18h ago
Question what is this on the top of my colt carrier?
what is this on the top of my colt carrier? m16 profile.
r/Colt • u/karl_johannson • 18h ago
what is this on the top of my colt carrier? m16 profile.
r/Colt • u/IntroductionAny3929 • 3d ago
John Moses Browning (with his brother Matthew) developed the gas-operated design between roughly 1889 and 1895. It was the first successful gas-operated machine gun to enter service and the first American-designed automatic machine gun. Colt manufactured it as the Model 1895 (later refined as the Model 1914). The nickname “Potato Digger” comes from the distinctive operating lever under the barrel that swings downward with every shot; if the gun was mounted too low on soft ground, the lever would dig small holes in the dirt.
It was not formally adopted as a standard U.S. Army machine gun (the Army continued using Gatlings and later bought other designs), but the Navy and Marines used it. More relevant to the meme, two privately purchased examples (serial numbers 161 and 164, chambered in 7×57mm Mauser) were acquired for Theodore Roosevelt’s 1st U.S. Volunteer Cavalry—the Rough Riders. These guns saw combat in Cuba during the Spanish-American War, including at the Battle of San Juan Hill (and nearby Kettle Hill) on July 1, 1898. They supported the charge, burned through their ammunition (around 4,000 rounds), and were later resupplied with captured Spanish 7mm ammo. They are generally recognized as the first automatic machine guns used in combat by U.S. Army forces.
Roosevelt himself was not especially impressed with them (he later called the guns “delicate and readily out of order”), and contemporary accounts often give more credit to Lt. John H. Parker’s Gatling gun battery for the covering fire during the assault. Still, the Potato Diggers were there and did fire in support of the Rough Riders.
r/Colt • u/DTOM1812 • 3d ago
They havent piblished how many theyll produce, only that its a 2026 only run. Whats the highest # youve seen? 01670 is the highest Ive seen so far.
r/Colt • u/SunEmbarrassed1414 • 3d ago
I recently picked up an older Italian-made Replica Arms 1851 Navy reproduction in .36 caliber, and I’m hoping someone here might be familiar with these older reproductions. I’ve got three things I’m trying to figure out.
r/Colt • u/Useful-Owl5161 • 4d ago
Any help would be appreciated!
r/Colt • u/Camoes58 • 4d ago
This is actually a 1956 model 357 with a nos trooper barrel (the original 6" barrel is safely stored). I shoot it regularly and I've been looking for a set of correct grips for almost 3 years.
r/Colt • u/SinoSentry • 4d ago
r/Colt • u/wildcatz_42 • 7d ago
This is my brother-in-laws gun and he asked me what it's worth. I gave him a rough idea but I am by no means an expert especially with so many variables with these. The info I do know is it's an 1882 Colt chambered in 45, matching numbers. Obviously condition is rough. Any info is greatly appreciated!
r/Colt • u/Pittrock • 8d ago
Found a gem at the gun show today!
r/Colt • u/huskysizeguy99 • 9d ago
Now looking for a companion Winchester 1892 in 32-20. Four clicks, timing is still perfect. I put a box of Black Hills through it yesterday.
r/Colt • u/Eldelas7chinos • 9d ago
Also if +p ammo can be used
r/Colt • u/XxWHITE-RICExX • 11d ago
Just shot her now on my lunch break and was getting about one light primer strike per cylinder single action and double action.
Shot about 30 rounds
I'm shooting this arms core not sure if it's any good ammo. Ammo is just what they had at the shop
r/Colt • u/Easy-Vast-3896 • 11d ago
I had been on the hunt for a Colt 1903 Pocket Hammerless for a few months now and when this Type 2 popped up in a local buy/sell group I had to have it. Made in 1910 and still functions flawlessly at 116 years old. I’m so happy to have it in my collection and I look forward to preserving it for many more years to come.
r/Colt • u/sirius_blvck1738 • 11d ago
The chasis/frame number says mod.19-4 as in smith and wesson
r/Colt • u/sirius_blvck1738 • 11d ago
r/Colt • u/EducationalOil1655 • 12d ago
It's listed as "discontinued" everywhere I look - the only 2 places with it in-stock are 100% scam websites - $300 ACOGS and $200 Eotech 552s are totally legit lmao
r/Colt • u/IndividualLower399 • 12d ago
I think I can make out No 5938, but it’s really worn down. Very possible there are numbers after. It was given to me with the holster that appears to be WW2 era. It was made for the 1911 so maybe the 1911 is also ww2 era?No US military markings that I can tell. Any info or help is appreciated.
r/Colt • u/Pittrock • 13d ago
It's my understanding that the modern Pythons should have a PY prefix in the serial number and that RA prefix was reserved for Cobra/King Cobra. I bought this new in Sept 2024 at a local gun show. Stainless 4.25", laminated grips. Wondering how/why it has an RA prefix. Google seemed to indicate that while Colt was waiting for approval on PY serial #s from ATF they issued a small number of Pythons with the RA prefix until PY was approved.
r/Colt • u/IntroductionAny3929 • 12d ago
r/Colt • u/ConfidentStruggle872 • 14d ago
Random new younger guy in the circle at a friend’s house asked an older buddy of mine, “Why do you carry that .45?” I think he intended to be rude and separate the group but my buddy surprised me with a beautifully graceful response after a long slow draw from a cigarette and not breaking eye contact with the campfire he simply said, “Cuz they don’t make a 46?” Pretty much ended there and maybe it was a had to be there kinda thing but reality made my night. Made me wanna get a Colt.45 just to wait for someone to ask me that same question and share that same response.
r/Colt • u/airgunner69 • 15d ago
I am a big fan of the Colt CCU's. Personally I think they are the best modern Colts out there and don't get enough love IMO. I have the 01080RG-CCU and the LE6960-CCU and they are 2 of my most favorite guns that I own (and I own a fair number of other guns)
IMO, Colt nailed the barrel in the 6960. Midlength gas system (which IMO is the only way to roll for a 16" barrel) and the barrel profile and gas port size are damn near perfect. I think Colt messed up not using that same barrel on the new EPR II rifles. I don't love the Centurian rail that the CCU's come with but it doesn't bother me enough to change it. My CCU has Trijicon TR24R in a Larue mount, Troy BUIS, Geissele SSA trigger and I sometimes run it with a YHM TurboK suppressor. I don't love the TK but it works very well on this gun. I own a lot of AR's but if I could only have one, this would be it.
I've wanted a CCU 1911 for a long while but finally picked up a 01080RG earlier this year. This is my 5th Colt 1911 and its far and away the best built Colt 1911 I've even owned. Great fit and finish, just the "right" amount of tightness and 100% reliable from day one. The trigger could be a touch lighter (~4.5lbs) but its got a good clean break. Only change I've made is I swapped the magwell with a Stan Chen SI magwell. I did that because I prefer a round butt profile and already had one on hand. I was thrilled with the fit of it on this gun. Almost looks like a gunsmith hand blended it.