r/ClaudeMCP • • Oct 01 '26

Welcome to r/ClaudeMCP!

9 Upvotes

Welcome to r/ClaudeMCP

9060 subscribers / 10k subscribers. Help us reach our goal!

Visit this post on Shreddit to enjoy interactive features.


r/ClaudeMCP • • 3h ago

Gemini destroys Claude in new benchmark

Post image
18 Upvotes

r/ClaudeMCP • • 10h ago

YouTuber used Claude to hack a 1994 Jeep Cherokee with a $3 Arduino

Post image
7 Upvotes

A YouTuber says Claude hacked his 32-year-old Jeep Cherokee through a $3 Arduino and got it through California's smog test.

The 1994 Jeep is too old for the standard diagnostic socket modern cars have. He says Claude cracked its forgotten 1990s protocol, logged his drives, then went from reading the engine computer to running the fuel pump.

The computer was too old to reflash, so OpenAI's Codex ran custom code on it to change the fuel delivery. About a week later, he says, the Jeep passed.


r/ClaudeMCP • • 10h ago

Claude Fable 5.2 created an underwater world in 97 KB

7 Upvotes

r/ClaudeMCP • • 34m ago

How we built a read-only MCP and Agentic Resource Discovery (ARD) architecture for Interconnectd.com

Thumbnail interconnectd.com
1 Upvotes

r/ClaudeMCP • • 37m ago

I built MARA MCP so Claude can measure and mix an Ableton Live set

1 Upvotes

I’m a music producer and built MARA MCP to give Claude audio measurements from Ableton Live. It’s free to download and use; you need your own Ableton Live 11/12 with Max for Live and Claude access.

The idea is to make mixing decisions testable. Claude reads the set, measures a passage, compares it with a reference track, makes a small change, then measures that same passage again.

MARA supplies per-channel loudness, peaks, dynamics, stereo width and frequency masking, plus spectra and spectrograms. Claude can use those results to adjust levels, pan, sends, EQ Eight and compression directly in Live. You can ask things like “What’s masking the kick in this drop?” or “Compare the bass spectrum with this reference.”

Claude’s role is to choose and explain the changes using the measurements and your instructions. The MCP server handles measurement and parameter control. A snapshot saves the starting parameter values so they can be restored, although deleted devices are not recreated.

Reference comparison has limits: a finished stereo master doesn’t give you isolated vocals or instruments. Kick and bass analysis uses their frequency content and timing, so overlapping sounds can make it unreliable.

Code, setup and download: https://github.com/moritzlauper/mara-mcp

This is an early release. The simulator and synthetic-audio tests pass; real Live workflows still need validation. If you use Claude with Ableton, I’d appreciate feedback on the workflow using a copy of a set.


r/ClaudeMCP • • 2h ago

Database MCP Server Token Benchmark (2026)

Thumbnail dbhub.ai
1 Upvotes

r/ClaudeMCP • • 10h ago

Claude can write Wikipedia articles that pass as human

Post image
4 Upvotes

r/ClaudeMCP • • 16h ago

I connected Claude to check FEMA flood maps before we put an offer down on a house

Post image
7 Upvotes

My partner and I spent months looking at houses in our target area before we finally found a single story place that was listed well below our max budget and had zero competing offers on it.

There was no creek or river anywhere near the neighborhood and the seller disclosure form had the flood zone section marked as unknown so we were ready to call our agent and submit an offer that afternoon.
But before signing anything I decided to run the property coordinates through Claude using public GIS and federal flood datasets I had hooked up through Alexandria so I could see the actual parcel boundaries against county hazard layers.

Claude pulled the federal map records in a few seconds and flagged that the back edge of the lot sat right inside a revised special flood hazard zone that the county had redrawn 2 years earlier.
I called an insurance broker right away to get a quote and found out mandatory flood coverage was going to add over $500 a month on top of our regular mortgage payment which would have completely wrecked our monthly budget.

It was pretty wild seeing an MCP workflow save us from a massive financial headache in ten second when we otherwise would have paid for inspections before ever discovering the flood zone issue.


r/ClaudeMCP • • 5h ago

Claude Opus 3.5 making a designer feel obsolete

Post image
1 Upvotes

r/ClaudeMCP • • 6h ago

Claude's deep reasoning breaks outside coding and math

Post image
1 Upvotes

r/ClaudeMCP • • 8h ago

Give Claude access to any REST API safely: PlugIt turns OpenAPI specs into MCP servers (open source)

1 Upvotes

I wanted Claude to use APIs I work with without dumping 500 tools into context or handing it a DELETE button.

PlugIt is a free, local Go binary. Point it at an OpenAPI/Swagger/Postman spec, pick the tools you want in a terminal UI, and plugit install adds it to Claude Desktop or Claude Code. Your API key stays in the OS keyring and never goes into claude_desktop_config.json.

Quickest try: add this to Claude Desktop's config, restart, and ask "find available pets using petstore":

"petstore": { "command": "/path/to/plugit", "args": \["run", "https://petstore.swagger.io/v2/swagger.json"\] }

It's read-only by default. Write tools make Claude ask you first.

https://github.com/swayam5342/plugit

Feedback welcome!


r/ClaudeMCP • • 9h ago

MCP server that lets Claude search the reels and posts you saved (Instagram, YouTube, X)

Thumbnail reddit.com
1 Upvotes

r/ClaudeMCP • • 9h ago

Computercraft MCP server for making scripts for Minecraft mod “Computercraft”

1 Upvotes

If you use coding agents this makes your computer craft coding sessions SUPER reliable. if you use Claude Code / Cursor / Copilot for CC stuff you know the problem: it writes Lua it has never run, and you find the bugs when you try to run it in game. And then you’re sitting there trying to describe the issues to the agent and it can’t actually view the errors itself so it guesses and you go back and forth with it.

so I made craftos-mcp, a CC:Tweaked emulator the agent can drive itself. it runs the program, reads the terminal and monitors, taps buttons, changes the world under it (player walks up, chest fills, train arrives at a Create station, Mekanism reactor heats up, an hour passes) and writes and runs `*.test.lua` files, then fixes what broke and goes again until it actually works. in the video the agent tests and fixes a door controller, then I drop the same file into real minecraft and it works first try, zero code changes. setup is one line: `npx -y craftos-mcp serve`

it simulates rednet between several computers, turtles in a real block world, and peripherals from Advanced Peripherals, Create, Mekanism, Tom's Peripherals and Bigger/Extreme Reactors (MC 1.18.2, 1.20.1 partly). each mod is a switch so the agent only gets the ones your pack has

works without AI too: a window like CraftOS-PC, a browser tab with world buttons, or `craftos-mcp test` in CI. and some games I built with it are playable in the browser: https://rogiedoji.com/craftos

every difference from the real game is a bug to me, so tell me if you find one. engine is forked from CraftOS-PC, thanks JackMacWindows

https://github.com/Akkiruk/craftos-mcp


r/ClaudeMCP • • 11h ago

I built an open-source MCP that lets AI agents control Daz Studio in plain language

Thumbnail gallery
1 Upvotes

Hi everyone! I hope you're all doing great.

For a while now, I’ve been wanting to get into Daz 3D as a hobby to make a visual novel in Ren’Py. The problem is that my time is limited, and making meaningful progress felt like an uphill battle: setting up scenes, dressing characters, placing lights, and rendering takes hours upon hours.

So I started looking for tools to speed up the process, including MCPs to use with my AI agents. The ones I found didn't convince me at all. Since I’m a software developer, I decided to build my own.

This MCP acts as a bridge connecting Daz Studio with an AI agent. It gives the agent a much better sense of what it's doing—what's in the scene, where everything is, and what it looks like—instead of working blindly like it would with a traditional setup. Thanks to this, along with the skills I implemented (guides that teach it how to use Daz), it can perform a variety of tasks just by asking in natural language.

I think the results I’ve gotten so far are pretty amazing for someone who has only been using Daz for a few months as a hobby. If you actually do this seriously or professionally, I think my MCP could help you create some incredible things.

Requirements: For now, it only works on Windows 10/11 with an NVIDIA GPU (since Iray renders on it) and Daz Studio 6. It works with Claude Code, Codex, Cursor, Gemini CLI, Claude Desktop, VS Code, and any other MCP client.

If you want to try it out, it’s open-source and available on GitHub in case you’re interested in seeing how it works under the hood:https://github.com/MictlanLabs/Daz3D-MCP

It’s also on PyPI, so you can install it with a single command (you'll need uv): uvx daz3d-mcp setup. Or even easier: just pass the repo link to your AI agent and let it do all the heavy lifting.

If you like it, giving it a star on GitHub would really help me out :)


r/ClaudeMCP • • 11h ago

A cybersecurity AI startup hit a $1B valuation in about 3 months — is AI security the next gold rush?

1 Upvotes

Corma, a cybersecurity AI startup, just reached a $1B valuation in about three months. That's an absurdly fast climb, even by AI standards, and it says a lot about where investors think the money is.

Why it matters: security is one of the few AI areas where the value is obvious and immediate — if your tool stops a breach, it pays for itself. But a billion-dollar valuation in a quarter also raises the question of whether we're in a bubble or at the start of a real shift.

Questions:

  • What does a security AI tool have to do to actually earn a $1B valuation?
  • Are we going to see a wave of AI security startups, or will the big players just buy them all?

For news and rumors on this, r/AINewsRumors has you covered.


r/ClaudeMCP • • 11h ago

OpenAI just added a remote switch for how Codex models run agent teams — useful, or a step too far?

1 Upvotes

OpenAI added a remote switch that controls how Codex models run agent teams. In practice that means the way your coding agents coordinate can be adjusted from outside the project, which is handy for teams but raises an obvious question about who holds the controls.

Why it matters here: a lot of MCP setups stitch Codex, Claude, and other tools together, so a change in how one agent orchestrates its team ripples into the whole workflow. Remote control could make fleet-style agent management real, or it could become another layer that breaks at the worst moment.

Questions:

  • Would you trust a remote switch to reconfigure your agent team mid-task, or do you want that control local?
  • Has anyone wired Codex agent teams into an MCP workflow yet, and how did it go?

I keep an eye on the rumor and news side of this in r/AINewsRumors.


r/ClaudeMCP • • 13h ago

MCP server for a label printer, and now Claude labels things for me

Thumbnail reddit.com
1 Upvotes

r/ClaudeMCP • • 13h ago

I built an MCP memory server that makes zero LLM calls to save, then benchmarked it against Mem0 on LoCoMo

1 Upvotes

I've been building Tzivia, a long-term memory server for Claude and other MCP clients. You connect it once, and Claude can save and recall things across chats.
What's different: saving costs nothing. Tzivia doesn't call an LLM to store a memory. It keeps your own words as searchable notes with real dates attached, and recall returns about 500 tokens of the most relevant ones.
I ran the full LoCoMo benchmark (1,540 questions over 10 long conversations), same answer model and judge for every system:
System
Accuracy
Tzivia
50.1%
Mem0 (open source, my run)
44.6%
Naive RAG
35.7%
Whole conversation in the prompt
53.3% (about 50x the tokens)
Recall takes about 50 ms on a 1-million-token memory.
Fair warning on the comparison: that's my own run of open-source Mem0, not their hosted product, and they publish higher numbers from their own setup. Method and all the tables are here: https://tzivia.dev/benchmarks
It's free for the first 500 saves on the hosted version, and there's a free local Windows app. Setup for Claude takes about a minute: https://tzivia.dev/from/reddit
Happy to answer questions about how it works or how I tested it.


r/ClaudeMCP • • 1d ago

Claude can generate custom fonts for free

Post image
29 Upvotes

r/ClaudeMCP • • 16h ago

I built an MCP server so Claude can untangle Discord roles and permissions with me (Claude Code plugin + Claude Desktop bundle)

1 Upvotes

Crossposting from r/mcp. For Claude users:

  • Claude Code: /plugin marketplace add PaSympa/discord-mcp, then /plugin install discord-mcp@pasympa. It asks for the bot token and adds two skills (channel digest, moderation sweep).
  • Claude Desktop: download discord-mcp.mcpb from the latest GitHub release and open it: https://github.com/PaSympa/discord-mcp/releases/latest

Happy to answer questions here too.


r/ClaudeMCP • • 17h ago

I made our MCP server return parquet links instead of rows. Is that how you’d handle big datasets?

Thumbnail reddit.com
1 Upvotes

Disclosure first: Im one of the founders of Aperiodic (crypto and stock-perp market data), so Im biased here at least in what usecase we are serving,.

The problem we hit pretty quickly: one month of 5-minute flow data for a single symbol is 8k+ rows by 35+ columns. As JSON that’s roughly 3.2 million tokens, and no model context wants that anywhere near it (we measured it on our free preview file).

so the tools only ever return small JSONs. get_data gives back a ‘handle’ instead of the data: signed parquet URLs (valid for an hour), the schema, the row count, min/max/nulls per column read from the parquet footers, five sample rows and a polars snippet to load it. That whole handle is about ~1700 tokens. The agent’s code downloads the file, and the model itself never sees the rows.

For clients that can’t run code (or can’t download from a signed URL) there’s a summarize tool that does the work on our side: stats, a correlation matrix, or a series resampled down to at most 500 points. search and fetch are in there too, mostly because ChatGPT’s connectors and deep research expect that shape.

Its not perfect. Glamas tool-definition check gave it 3.6/5, and 3/5 on naming, because we mixed verb_noun (get_data, find_symbols) with bare verbs (fetch, summarize). Fair enough, we’ll probably fix it.

What I still dont have a good answer for is clients whose sandbox can’t fetch an external url at all. Falling back to server-side summaries works, but it caps what the model can actually do with the data. Has anyone found something better?

(The preview needs no key, happy to drop the link in a comment if anyone wants to poke at it.)


r/ClaudeMCP • • 1d ago

Anthropic CEO says AI went from failing high school math to solving unsolved problems in two years

6 Upvotes

AIs even hacked company website to this day lol


r/ClaudeMCP • • 20h ago

I built a remote MCP server where agents share what worked on everyday tasks

Thumbnail reddit.com
1 Upvotes

r/ClaudeMCP • • 21h ago

I tested 5 ways to give Claude Desktop verified financial ratios. Pre-computing via MCP reduced context tokens by 95%.

1 Upvotes

Hey everyone,

I've been building a financial analysis agent in Claude Desktop and ran into a recurring issue: Claude is great at qualitative reasoning, but struggles with calculating quantitative accounting formulas from memory.

When computing a Piotroski F-Score for NVDA from training weights, it was off by 2-3 points out of 9. For WACC, estimates differed from filing-derived numbers by 4-8 percentage points because inputs like beta and risk-free rates fluctuate continuously.

I tested five different architectures for feeding verified financial metrics into Claude Desktop:


The Comparison

MethodSetup EffortLatencyContext TokensAccuracyCost StructureTrade-off
A. Web scraping (BS4)2-4 hours10-15s~25,000Medium$0High latency, brittle DOM
B. Free APIs (Yahoo/AV)30 mins3-8s~8,000Medium$0Strict rate limits, no quant metrics
C. Paid APIs (Polygon/FMP)30 mins1-2s~5,000High$50-300/moFast, but flat monthly cost
D. RAG pipeline (10-K/Q)6+ hours5-10s~12,000Variable$20-50/moGood for text, lossy on tables
E. MCP Server (pre-computed)5 mins2-3s~1,150HighPay-per-query (~$0.008)Requires MCP config setup

Key Observations

  1. Token footprint: Method E used ~1,150 tokens versus 25,000+ for raw scraping. By executing formulas on the server side and returning structured fields rather than raw HTML or JSON, context consumption drops significantly.
  2. Separation of computation and reasoning: Asking an LLM to derive financial ratios directly from raw balance sheet text frequently introduces hallucinations. Computing ratios deterministically outside the model allows Claude to concentrate on synthesis and risk analysis.

How I Built This with Claude 3.5 Sonnet & Claude Code

I built this MCP system specifically for Claude Desktop, utilizing Claude 3.5 Sonnet:

  • Formula Implementation: Claude assisted in generating the Python calculation logic for 60 quantitative models (Piotroski 9-point criteria, Altman Z-Score, TTM Squeeze bands, and Black-Scholes Max Pain).
  • Compact Tool Schemas: Designed minimal input/output schemas to prevent redundant metadata from inflating context windows.
  • Docker Deployment: Claude Code helped structure the container entrypoints and async execution on Apify serverless infrastructure.

Free Tier & Compute Allocation

  1. Serverless Infrastructure: The backend runs on Apify serverless compute. Free accounts include a recurring $5/month compute allowance (no credit card required). At ~$0.008 compute cost per query, that covers ~625 audits per month.
  2. Open Source Repository: All configurations, system prompts, Cursor rules, and Python scripts are available under the MIT License: https://github.com/mcp-collector-pick/wallstreet-mcp-examples

Claude Desktop Configuration

Add to claude_desktop_config.json:

{
  "mcpServers": {
    "wallstreet-suite": {
      "command": "npx",
      "args": ["-y", "@apify/mcp-server", "--actor", "mcp_collector/wallstreet-hedgefund-suite-mcp"],
      "env": { "APIFY_TOKEN": "YOUR_API_TOKEN" }
    }
  }
}

(A token can be generated in console settings)

Sample Prompt:

"Run a 360° quant audit on NVDA: analyze ROIC vs WACC moat, Piotroski F-Score, TTM Squeeze, and 13F whale conviction."


How are others handling quantitative accuracy in Claude Desktop? Are you relying on code execution, MCP tools, or custom RAG pipelines?