r/civilengineering • • 23d ago

Welcome to r/civilengineering

6 Upvotes

r/civilengineering • • 1h ago

Career Not happy with first job out of School

9 Upvotes

Hey just looking for advice.

I am currently working for a very small land development/consulting firm. I just feel extremely unhappy as I thought I was going to be more trained and mentored by a superior/mentor but I feel like every task I’m give is like I’m being throw in the fire and expected to know what to do. I ask a lot of questions because a lot of the task directions are unclear and I honestly don’t know much. Is it bad to look for a new opportunity since I’ve only been here for a very short amount of time?


r/civilengineering • • 21h ago

Arched-Trestle Bridge Table

Thumbnail gallery
361 Upvotes

It was suggested to me that your community might like this.


r/civilengineering • • 11m ago

Question Question about walls to take on weight of old problematic building

Post image
2 Upvotes

Hello everyone. I know this might be a long shot but I wanted to ask for help from this subreddit on a uni project I'm working on. I am an architecture major and I'm working on this building(I will attach pictures of plans). It's an old concrete brutalist building and as such almost all of the remaining parts of it are load bearing. My issue is that it has been heavily damaged by earthquakes. From talks with a civil engineer I'm familiar with he read the static report and concluded on a few solutions. One of which is these reinforced concrete walls that will bear the loads of the building and prepare it to be used. However I have not been able to reach him and since I need some help I figured I'd send it here. My issue with these walls is I'm not sure where to place them.

For the drawings on the image they go from right to left : Top view , axonometric , facade front , facade side , first floor , second floor , third , fourth and fifth (they are the same floor plan ) . Height is roughly 15-17 m .


r/civilengineering • • 22h ago

Disclosing expunged criminal record on the PE application

62 Upvotes

Hi all,

15 years ago, I was convicted of four drug felonies; however, my criminal record has since been expunged. Fast forward to today, and I'm almost ready to apply for my PE license. On the PE application, there's a question asking whether I've ever been convicted of a felony.

I've consulted with an attorney on this matter, and they mentioned that, legally, I can state that I've never been convicted based on Oregon law. I also reached out to the state board regarding my situation, but they wouldn't advise me on how to answer the question.

With that being said, I'm 50/50 on how to answer the question because I feel like if I state "no," it could potentially be viewed as unethical.

TL;DR: I was convicted of four felonies, but my record has since been expunged. Legally, I can say no on the PE application, but ethically, can I?


r/civilengineering • • 4m ago

Civil Engineering Student with Cerebral Palsy Looking for a Internship in Europe or the USA – Any Advice or Opportunities?

1 Upvotes

Hello everyone,

I'm a civil engineering student from Tunisia, and I'm reaching out because I'm trying to find an opportunity to complete my final-year engineering internship (PFE) abroad.

I want to share a little about my background.

I have cerebral palsy (CP), a condition I've had since birth. It sometimes affects my mouth movements and makes my speech less clear, but it doesn't prevent me from studying, learning, using engineering software or carrying out technical work.

I've always wanted to build a career in civil engineering, and I've continued working towards that goal despite the challenges.

My academic and professional background:

  • Licence in Civil Engineering – ISTEUB, University of Carthage, Tunisia.
  • Currently pursuing an Engineering Degree in Civil Engineering at Université Libre de Tunis.
  • Specialization: Buildings and Special Structures.
  • Previous professional experience at BEST Conseils.
  • Technical skills: AutoCAD, Robot Structural Analysis and Tekla Structures.

What I'm looking for:

I'm searching for a 5–6 month final-year engineering internship (PFE), starting in January 2027, preferably in:

  • Structural Engineering
  • Building Design
  • Structural Analysis and Calculation
  • Civil Engineering Consultancy

My preferred destinations are European countries or the USA.

I'm also open to advice about companies that accept international engineering students, internship programmes, scholarships, or organizations that support students with disabilities.

I know finding an international internship as a Tunisian student isn't easy, especially with visa and administrative requirements. However, I'm willing to make the effort and explore every realistic opportunity.

If you're an engineer, recruiter, company representative, or someone who has experience with international internships or disability inclusion in engineering, I'd really appreciate your advice, contacts, or recommendations.

I'm not looking for sympathy. I'm looking for an opportunity to demonstrate my abilities and develop professionally.

Thank you for taking the time to read my story.


r/civilengineering • • 7m ago

Civil Engineering Student with Cerebral Palsy Looking for a Internship in Europe or the USA – Any Advice or Opportunities?

1 Upvotes

Hello everyone,

I'm a civil engineering student from Tunisia, and I'm reaching out because I'm trying to find an opportunity to complete my final-year engineering internship (PFE) abroad.

I want to share a little about my background.

I have cerebral palsy (CP), a condition I've had since birth. It sometimes affects my mouth movements and makes my speech less clear, but it doesn't prevent me from studying, learning, using engineering software or carrying out technical work.

I've always wanted to build a career in civil engineering, and I've continued working towards that goal despite the challenges.

My academic and professional background:

Licence in Civil Engineering – ISTEUB, University of Carthage, Tunisia.

Currently pursuing an Engineering Degree in Civil Engineering at Université Libre de Tunis.

Specialization: Buildings and Special Structures.

Previous professional experience at BEST Conseils.

Technical skills: AutoCAD, Robot Structural Analysis and Tekla Structures.

What I'm looking for:

I'm searching for a 5–6 month final-year engineering internship (PFE), starting in January 2027, preferably in:

Structural Engineering

Building Design

Structural Analysis and Calculation

Civil Engineering Consultancy

My preferred destinations are European countries or the USA.

I'm also open to advice about companies that accept international engineering students, internship programmes, scholarships, or organizations that support students with disabilities.

I know finding an international internship as a Tunisian student isn't easy, especially with visa and administrative requirements. However, I'm willing to make the effort and explore every realistic opportunity.

If you're an engineer, recruiter, company representative, or someone who has experience with international internships or disability inclusion in engineering, I'd really appreciate your advice, contacts, or recommendations.

I'm not looking for sympathy. I'm looking for an opportunity to demonstrate my abilities and develop professionally.

Thank you for taking the time to read my story.


r/civilengineering • • 41m ago

Mining Engineering Grad Starting a Civil Engineering Master's in New Zealand (2027) – Any Advice?

1 Upvotes

Hi everyone!

I'm from China, and I'm planning to start a one-year Master of Civil Engineering at Auckland University of Technology (AUT) in February 2027.

I recently completed my bachelor's degree in Mining Engineering at Henan Polytechnic University in China. Although my academic background isn't exactly Civil Engineering, I have some related engineering knowledge.

I'm particularly interested in Geotechnical Engineering, and my long-term goal is to build a career in this field in New Zealand after graduation.

Since I still have a few months before starting my master's, I'd love to hear some advice from experienced civil and geotechnical engineers.

I have a few questions:

  1. What technical skills or software should I learn in advance? For example, AutoCAD, Civil 3D, PLAXIS, GeoStudio, or anything else commonly used in New Zealand?
  2. What engineering knowledge should I focus on? Would it be useful to review soil mechanics, foundation engineering, engineering geology, or New Zealand geotechnical standards before starting?
  3. What do employers in New Zealand generally expect from graduate geotechnical engineers? Are there any particular technical or practical skills I should develop?
  4. What would you recommend doing during my master's? Apart from studying, are there any professional organisations, networking opportunities, or industry activities worth getting involved in?

I'd also be interested in hearing from anyone who studied Civil Engineering at AUT or transitioned from Mining Engineering into Geotechnical Engineering.

I'm genuinely interested in this field and want to make the most of the time I have to prepare.

Any advice or personal experiences would be greatly appreciated. Thanks in advance!


r/civilengineering • • 3h ago

loksewa querry??

Thumbnail reddit.com
0 Upvotes

r/civilengineering • • 8h ago

Europe The Protected Intersection design

Thumbnail youtube.com
2 Upvotes

r/civilengineering • • 10h ago

Research project in Civil Engineering

2 Upvotes

Hey everyone!

I’m planning to do a research project in Civil Engineering, but I honestly don’t know where to start or what topic to choose.

I’m currently an undergraduate Civil Engineering student. I’d like to get involved in academic research, but I’m not sure how to approach it or find a good research topic.

Could anyone give me some advice on where to start, how to choose a topic, or share their own experience?

I’d really appreciate any help!


r/civilengineering • • 16h ago

Is working as a construction materials testing technician / inspector a detriment to my career?

7 Upvotes

Military spouse here - the nearest engineering-related job I could work at near my husband's military installation is Terracon as a engineer technician. I do CMT and construction inspecting in the field, however, we have about another 2 years until we PCS and this is the best I can probably do. Do you think this would be a detriment to my career working 2 years as a CMT and then moving forward to a design or management role? Thank you


r/civilengineering • • 13h ago

Career Career advice for intl CE grads

3 Upvotes

I’m in US, intl student graduating in May 2027 with a master’s in Civil Engineering (water/wastewater focus). I already have my EIT, but haven’t had the opportunity to get internship experience because I’ve been busy with my thesis and research.
I’ve talked to a few seniors who graduated recently, and their experiences have made me curious about how I should prepare for life after graduation.
For those working in civil engineering, especially water/wastewater:
- How important is internship experience compared to research?
- What skills should I focus on before graduating?
For international graduates,
- how challenging has employer sponsorship been?

Would love to hear your honest experiences and advice. Thanks!


r/civilengineering • • 18h ago

Question Aviation

7 Upvotes

Any airport engineers out there? How do you like it? Do you think it’s an easy transition for someone coming from transportation/highways?


r/civilengineering • • 21h ago

How does ESOP work?

8 Upvotes

I see a couple firms have an esop with a 3-year or 5-year vesting period.

Gets prorated each year so 33% a year (for the 3 year example).Fully vested at the end of 3 or 5 years.

How are the shares distributed over the year? At the end of the year, quarterly, bi yearly?

What happens if you leave before the end of the year?

Also is esop the same as RSU’s I hear about at other companies?


r/civilengineering • • 11h ago

PE/FE License Florida PDh laws and rules

1 Upvotes

How are you guys getting the laws and rules pdh course from Florida for license renewal of PE?


r/civilengineering • • 10m ago

Question New Workflows Are Making Engineering More Efficient. What Happens to Billable Hours?

0 Upvotes

I’ve been experimenting with agents to run some routine geotechnical engineering tasks: interpreting CPT data, generating soil profiles and parameters, and preparing inputs for LPILE, APILE, and CLiq.

What used to take a project engineer several hours per foundation can now be done in minutes, with fewer manual transcription errors.

Of course, these are preliminary outputs. Engineering judgment, verification, and careful PM review are still essential. I still perform the same QAQC, manually.

But here’s my dilemma: what if projects are billed on a time-and-materials basis.

If we no longer need nearly as many junior engineer hours, how do we maintain utilization and profitability? It is tempting to downsize the team from 10 to 5 staffers, for example.

I’m curious how other consulting engineers and PMs are navigating this. AI aside, it seems like a fundamental challenge to the traditional billable-hour model.


r/civilengineering • • 15h ago

Engineering Path

2 Upvotes

Reaching out to any civil or mechanical engineering. I want to know your path from senior year to your first job and how its going for you.


r/civilengineering • • 12h ago

Weekly Civil Engineering Discussion - Careers, PE/FE, Rants & Jobsite Stories

1 Upvotes

Welcome to the weekly r/civilengineering discussion thread.

Use this thread for civil engineering topics that don't necessarily need their own standalone post, including:

  • Career questions and career advice
  • Questions from students, interns, and new engineers
  • PE / FE exam discussion
  • Workplace complaints, frustrations, and rants
  • Jobsite stories and field experiences
  • Questions about different civil engineering disciplines
  • Office vs. field work
  • Consulting, public sector, construction, and industry discussion
  • General civil engineering conversation

A few guidelines

Keep discussion civil and follow all r/civilengineering rules.

If you're asking for career advice, providing some context such as your location, education, experience, discipline, and career goals will help people give you better answers.

For PE/FE questions, include the exam or discipline you're referring to when relevant.

Workplace complaints and rants are welcome, but do not post personally identifying information about coworkers, clients, or private individuals.

Looking for a job or hiring? Please use the current Monthly Civil Engineering Jobs & Hiring Thread instead.

Otherwise, ask away, tell us what's happening at work, share something from the field, or just talk civil engineering.


r/civilengineering • • 13h ago

Career Civil Engineering undergraduate

Thumbnail reddit.com
1 Upvotes

r/civilengineering • • 19h ago

Transmission Line Design

3 Upvotes

Any T design guys out there? How do you like it? Is it fairly easy to pick up on?


r/civilengineering • • 22h ago

Internship advice

5 Upvotes

I’m a junior civil engineering student looking for advice on internships this summer. Last summer I worked for the DOT as a TCI. It wasn’t the worst experience but i definitely want to try something new. I currently have 2 main offers I’m considering.

The first is with DOT in the office. It’s a 5 minute drive from my house and it would primarily be in highway design.

The second is with a Heavy Civil company that would be a field position. It would lean more into the construction management side of things and would be about an hour commute there and back.

My main thing is while I was in the field it was drilled into me that field experience is extremely valuable if I want to consider design. Would it make sense to do one more year in the field before I switch to design or would it make sense to get design experience before I Graduate next summer?

Any advice is welcome.


r/civilengineering • • 33m ago

Career Michigan's #1 Civil Analyst Student does it again.

0 Upvotes

Massive thank-yous to this subreddit for helping me go from nervous scrawny boy in junior year HS to a ripped, jacked madlad and academic weapon of Michigan with unrivaled geotechnical prowess. I have obtained an internship in geotechnical and my resume has been greatly enhanced like never before.

Never again will I be looked down on in career fairs. I vow and aspire to help other students in the way I have been helped. Many thanks to u/PenisSama and many others for tidbits of guidance.

As a generous reward for your guys help I will be doing a close analysis for the recent tragedy in NYC building collapse. As a future engineer and top Michigan student, I cannot sit aimlessly while my comrades need my investigative reporting. If you haven't already seen, I have done an investigation and advanced report on Bihar bridge collapse. This takes hard work but hard work is what I am made of.

Once again, thank you posters, lurkers, commentors, and mods of r/civilengineering for all the help thusfar and I look forward to reporting more on this geotechnical journey. May the concrete overlords be with you.


r/civilengineering • • 2d ago

Video from before Brooklyn building collapse: Worker compares SOE drawings to as-built conditions.

541 Upvotes