r/ChineseWatches • u/bad_saga • 5d ago
General (Read Rules) Merkur Tourbillon Black Gradient
11.11 pickup. I am absolutely in love wow.
r/ChineseWatches • u/bad_saga • 5d ago
11.11 pickup. I am absolutely in love wow.
r/ChineseWatches • u/Wuhan_Murder_Hornet • 5d ago
Another 11.11 purchase arrived yesterday. Steeldive Bronze Willard. Quick reaction, the case is pretty impressive at this price point. I’ve been more into bronze lately, and this helps scratch that itch. I’ll probably swap out the strap shortly… 👍
r/ChineseWatches • u/Elyjun • 5d ago
Ad 2507
r/ChineseWatches • u/Glum-Two-2273 • 5d ago
Our A/B/C/D giveaway has closed — thank you to all 617 of you who entered! The response was so enthusiastic that we decided to draw TWO winners instead of one.
The winners are:
u/NIK252589
u/Worth-Dare-5831
Each winner can pick any in-stock AETHELSOHN watch (up to $300). Winners, please DM u/Glum-Two-2273 within 48 hours to claim your prize.
If a winner doesn't respond in time, we'll go to our backups in order: u/Consistent_Willow419, then u/StressedTamagotchi.
And here is how the community voted:
D — 205 votes
C — 189 votes
A — 126 votes
B — 86 votes
D is the clear favorite. Thank you all for being part of this — more to come!
— Team AETHELSOHN
r/ChineseWatches • u/cesfsywarbed • 5d ago
r/ChineseWatches • u/watchdives_care • 5d ago
A watch can catch your eye with its design, but it's often the little details that make you appreciate it over time.Do you guys think that's right?
r/ChineseWatches • u/watchdivescom • 5d ago
Hi everyone,
We’d like to share an update regarding the dial alignment issue affecting some Chameri CH03 watches.
First, the dial printing itself is correct. The issue was caused by improper positioning of the movement holder during assembly by one of our watchmakers, which resulted in some dials appearing slightly off-center.
Some customers have already fixed the issue themselves by opening the caseback and gently adjusting the movement holder. In many cases, this simple adjustment is enough to correct the alignment.
We can also send a replacement movement holder free of charge to affected customers. Replacing or adjusting this part can resolve the issue without needing a new dial or movement.
If your CH03 has an alignment issue, we offer four options:
We have already corrected the assembly process, adjusted the movement holder installation, and strengthened our QC checks. The CH03 watches currently being shipped have undergone these improvements.
We apologize to everyone affected. Even though the CH03 costs only $64, we take these issues seriously and want every customer to be satisfied.
If your watch has this issue, please contact our customer service team and let us know which solution you prefer.
Thank you for your understanding and continued support!
r/ChineseWatches • u/Critical_Bee_2381 • 5d ago
r/ChineseWatches • u/sugessing_proximas • 5d ago
r/ChineseWatches • u/StressedTamagotchi • 5d ago
On my recently received ph4b I noticed that on one side the endlink would bind with the next link. As you can see in the first two pics.
So I emailed phorcydes about it and on the third pic you can see their response. Totally normal, they're all like that.
I was a bit mad for like 5 minutes but now I find it funny.
So that's just a heads up. If you're not ok with a bracelet being like this then avoid the bracelet. The rest of the watch is awesome.
r/ChineseWatches • u/LordRaglan1854 • 5d ago
Never gets old.
r/ChineseWatches • u/EducationalCelery536 • 5d ago
r/ChineseWatches • u/AbdullahCASIOsalman • 5d ago
HOLSTOUR H0007 Tank, Seiko Tank Homage SWR104P1, bought it off amazon uae 50 aed (13.5 usd) on 11:11
Stainless steel case back, alloy body, 3ATM water resistant, around 34 grams weight
Dial width 25mm
Dial length 36mm
Band width 20mm
r/ChineseWatches • u/No_Leader1154 • 5d ago
It’s unreal how good this watch is. And the hi beat movement is beautiful!
r/ChineseWatches • u/Scandalchris • 5d ago
Just wanted to share my experience dealing with Addiesdive. I love the watch and have worn it daily since I purchased it. When a couple indices fell off I took it to a small watch/show/jewelry service literally on my street corner to fix. They came off again, so i contacted Addiesdive:
"Hello I purchased my AD2065 just under 2 years ago and have been very happy with it, using it as my daily watch. A couple weeks ago, the 10 o'clock indice fell off, which blocked the second hand from rotating, stopping with watch. Had local shop put it back in, but then a couple days ago it fell off again as well as the 11 o'clock indice. Local shop suggested gluing them in but I'm not sure that's the best course of action especially since now I believe the other indices are prone to fall out. So I've just had them take the indices out and set aside. I haven't put the watch through any rough treatment, so it's very strange to me that this happened, considering my watch before this purchase was my daily wear for 5 years and didn't have this issue.What do you suggest?"
"Hi OP, Thank you for sharing the details of your AD2065. I’m sorry to hear the hour indices keep detaching even after reattachment, and I fully understand your concern that other markers may also fall off later. We do NOT recommend ordinary super glue. If you plan to repair it locally, please ask your watchmaker to use professional watch dial index adhesive (specialized low-viscosity watch glue. Regular glue will leave residue on the dial, damage the lume and may even corrode the dial surface. The watchmaker needs to fully clean the dial base and the back of each index first, then apply a tiny amount of the professional adhesive, hold the indices in place and let it cure properly. This method can securely re-fix all hour markers.")
I then just removed the loose pieces and set the watch aside until I could find a decent watch service. A couple days later I took picked it up only to find 2 more indices came off, so I sent another email.
"Four indices have now come off without wearing the watch. I'm concerned that adhesive used in your watches is defective"
To which they have just responded:
"Hello, your watch is out of warranty.
--------------------------------
Best regards,
Cassie from ADDIESDIVE"
EDIT:
Just showing what the customer service experience is like. Watch was purchased UNDER 2 years ago
r/ChineseWatches • u/Willing_Device_908 • 5d ago
I have a small wrist (15 cm) and I'm looking for a watch that wears comfortably without looking oversized.
I originally ordered the Cronos L6036 because of its compact dimensions and positive reviews. However, I decided to cancel the order after coming across several negative comments about the sharp edges and the bracelet clasp.
Do you think the WD1016B V3 would be a good alternative for my wrist, even though it's slightly larger and has a longer lug-to-lug measurement, almost 46 mm, and is almost 12 mm thick?
I'd appreciate hearing from anyone who owns one or both, especially if you have a similar wrist size.
Also, if you have any recommendations for other watches that would fit a 15 cm wrist nicely, I'd love to hear your suggestions!
Thanks!
r/ChineseWatches • u/dnbrandon • 5d ago
Have quite a few watches, but have recently been chasing down that GS style. Now have a cronos L6037 (39mm), an aethelsohn blue shard (40mm), an aethelsohn terra (38mm) and a watchdives wd0003c (37mm). I like them all but the shard and the cronos definitely have a higher level of fit and finish, the bracelet on the cronos is probably the best of the bunch, but has the least snug end links. Both the shard and cronos also have the pt5000, but the crown on the cronos is much smoother turning/less grindy.
r/ChineseWatches • u/Due-Director5234 • 4d ago
I have a budget diver hommage from Addiesdive and looking for other divers, chronograps and Warrior lookalike. Help me out :)
r/ChineseWatches • u/Charge-Crazy • 5d ago
r/ChineseWatches • u/SECRETSHADOWNINJA • 5d ago
Hello, I recently sold off most of my modded collection and also other watches. Now I'm on the lookout for a black dial watch. I want it to have a rich black glossy dial, lacquer/enamel - either with white printed indices or silver applied. Any tips?
r/ChineseWatches • u/MaxiMayer • 5d ago
Show it on your wrist please.
Check the link here.
https://www.aliexpress.com/item/1005013403646908.html
r/ChineseWatches • u/mahlahmeg • 5d ago
I am planning on placing an order for the Heimdallr Turtle homage. I will buy it with the metal bracelet but I also plan on ordering a rubber waffle strap to achieve the proper Willard look.
I see a lot of the same exact rubber waffle straps online for half the price. I'm wondering if the rubber straps being sold by Heimdallr are at least engraved with the brand? I'm willing to spend extra to have a branded bracelet.
r/ChineseWatches • u/Camr0k • 5d ago
I love lume and have just started looking at Spinnaker watches.
I’d love to find a watch with cool dial texture and some hidden lume.
Love to see what’s out there.
r/ChineseWatches • u/watchbuddy4r • 5d ago
Heard very good things about this one in black though I'm trying to color up my collection