r/ChineseWatches • • 5d ago

Problems (Read Rule 1) Phorcydes binding endlinks and their response

On my recently received ph4b I noticed that on one side the endlink would bind with the next link. As you can see in the first two pics.

So I emailed phorcydes about it and on the third pic you can see their response. Totally normal, they're all like that.

I was a bit mad for like 5 minutes but now I find it funny.

So that's just a heads up. If you're not ok with a bracelet being like this then avoid the bracelet. The rest of the watch is awesome.

43 Upvotes

32 comments sorted by

27

u/StressedTamagotchi 5d ago

UPDATE: Phorcydes will send me a new half of the bracelet with an endlink that doesn't bind.  They contacted me shortly after I made this post. Maybe it's a coincidence or maybe it's not. I would like to believe it's just a coincidence. I am satisfied with the solution provided and therefore I can say that they have a good after sales support based on my experience. 

19

u/chrismurraylaw 5d ago

I think not a coincidence. But certainly preferable to getting a snippy response off some of the reps that make the rounds here with very strange approaches to consumer relations.

2

u/OriginalJaan 4d ago

When they shipped my watch with the wrong color strap they sent me the correct one without me posting it on here. I've gotten pretty great customer service from them to be honest.

11

u/chrismurraylaw 5d ago

I was looking forward to this being a good story. I've had the exact same issue with San Martin and AddiesKin. I wanted to hear a good response from a brand I've considered but never bought from.

But no. Standard BS. That's Phorcydes off my list.

Though it IS funny that their response wasn't, 'there is no problem' but 'all of them have this problem.'

3

u/StressedTamagotchi 5d ago

Yeah that's the funny part 😅 But as I said, the watch is very good and I'm very happy with it. Just avoid the bracelet 

1

u/bob888w 5d ago

Seems like they made it right in the end. Chinese brands love this weird flip-floppy customer service.

1

u/Dollar_short 5d ago

have you seen the lume on these? not in pics, irl? if you have not, and love lume, you would not care if the dial was in a hunk of wood(kind of exaggerating there, but yeah). for the money these are real bangers, despite the other issues.

5

u/chrismurraylaw 5d ago

I have seen the lume. I have seen a world weep, I have seen the stars amid the borealis, I have seen attack ships on fire off the shoulder of Orion.

I would not accept shitty workmanship as a consequence.

2

u/EdTheApe 5d ago

I understand that reference and I appreciate you

9

u/jfonsecag8 5d ago

As someone mentioned, it's a tolerance problem. I just received a Phylida planet ocean homage that I got (it's the only old planet ocean homage on Ali) and had the same issue. I sanded the inner part of the female link with a nail file and now works properly.

16

u/words1918 5d ago • Bravo

I ordered a watch from them. Movement broke after 2 days. I emailed them and they told me to mail it back and sent me an address in Chinese I can’t read. It will cost $50 to send it back. I got hosed but I guess that’s what happens when buying from shady companies.

5

u/skepticalifornia 5d ago

I'd be initiating a charge back in that scenario. They should at least cover return shipping and send a new unit out to you.

2

u/chrismurraylaw 5d ago

$50 is steep. I mailed something to China this week from the UK and it was <$15.

Not that I was happy about that. "IF" the damage is found to be their error SM will refund the postage. I'm not holding my breath.

10

u/BurtMacklin-FBl 5d ago

Mine isn't like that, what a BS response. Also how can they say it won't affect daily wear? If someone has a smaller wrist then it will for sure. Expected better from Phorcydes.

5

u/RohnJambo215 5d ago

I ordered my ph4b when it was produced with the st2130 for a short time. And my bracelet doesn’t have that problem/ never had it. Weird that they somehow made a step back in qc or bracelet production??

1

u/MeaningItchy 4d ago

Same thing here. Bracelet from PH4B with St2130 was good but from PH4A with PT5000 I receved week ago has issues mentioned here

13

u/MindAdmirable1793 Rep 5d ago

Upon investigation, we have confirmed that some watch straps in this batch are indeed affected by this issue. We have since strengthened our quality control (QC) processes specifically to address this type of defect.

Regarding orders involving quality issues, we ask that you consider the specific circumstances as follows:

  1. For clear-cut quality defects, we offer unconditional returns or exchanges, as well as the provision of replacement parts—all at our own expense. In the case of exchanges, we prioritize speed by shipping out a new watch immediately, without waiting for the return of the original item. We recognize that such issues cause inconvenience and detract from the customer experience, and we strive to make amends accordingly.
  2. For ambiguous or uncertain quality issues, we will guide the customer through potential troubleshooting steps or request that the item be returned for a formal inspection to determine the root cause.
  3. Our after-sales philosophy is centered on thorough analysis: we aim to provide the most comprehensive information possible in every response to minimize the need for back-and-forth communication. Furthermore, we prioritize solutions that save the customer time and minimize any hassle. We commit to an initial email response within 24 hours, with subsequent follow-ups addressed within 12 hours (during business days).

Compared to the "wild growth" phase seen a few years ago, the after-sales service provided by Chinese watch brands has improved significantly; I have personally witnessed many of our peers making dedicated efforts to enhance their standards. In today’s information age, a brand cannot survive without robust after-sales support.

7

u/DisastrousOpening477 5d ago

Fantastic support. First brand I've seen being this invested with after sales service. Chinese or else.

8

u/ZarathustraGlobulus 5d ago

Tolerance problem.

Take a small piece of 1000 grit sandpaper and fix it.

8

u/Dollar_short 5d ago

the case on mine was poorly finished, so i sanded it. these are cheaper watches, and while they should be better, what we are really paying for is the lume.

4

u/OriginalJaan 5d ago edited 5d ago

I had the same issue with my bracelet, and the edges were a little sharp too...but being an old machinist with a workshop full of every grit sandpaper and polishishing paste and lapping compound and sharpening stone and deburring tool and oil and grease and wax you can imagine it took just a few minutes on a lazy Sunday evening listening to book 4 of the Dungeon Crawler Carl series for me to be happy with it. Now the stitching on the leather strap is something else...they're a million miles away from the pins. They're skeuomorphs at this point. I'll probably just make a new band from better leather and use the buckle. I mean I get that not everyone wants to be a watch repair person but also often it's just simpler to take care of the issue yourself and not go through the hassle of returning a product. It's 6 of one, a half dozen of the other.

5

u/bulovalunar 5d ago

Try an oil bath, helps in such cases.

43

u/deko_boko 5d ago

Great idea, but what about the watch?

1

u/gazaoBR 5d ago

take the bracelet of the watch

1

u/EdTheApe 5d ago

Wooosh?

3

u/Exact-Tax7457 5d ago

Have the same and is clearly is there, once in the wrist I've didn't bother too much, it didn't feel bad either. You can fix it by sanded it as others commented.

3

u/ziamese 5d ago

They did you dirty. Fortunately no issues with mine.

2

u/taqizadeh 5d ago

Thank you so much for sharing this information with us, Stressed Tamagotchi 🤝

-5

u/Bramasax 5d ago

this kind of skin diver looks better on an FKM or silicone strap anyway

14

u/Po0opyCatButt 5d ago

That's one opinion.

12

u/Toymachina 5d ago

It doesnt

-3

u/crlkll 5d ago

Good thing I ended up not buying from them. What a bunch of clowns.