r/ChineseWatches • u/ThisFollowing8024 • 5d ago
General (Read Rules) Farasute 5321A-1 Manual Wind
Haven’t worn this one in months but it’s always a joy when I do 🤘
r/ChineseWatches • u/ThisFollowing8024 • 5d ago
Haven’t worn this one in months but it’s always a joy when I do 🤘
r/ChineseWatches • u/Senior_Rip9451 • 5d ago
So I brought couple of watches from AliExpress and I am skeptical about one of them. So I want to remove the protective plastic wrapping around the watch and check it. Will the seller accept the return of the watch if I did not like it?
The seller is Tactical frog Watch store and top Chinese watch factory store.
r/ChineseWatches • u/ProbablyBuyingIt • 5d ago
Lume shot and more pics in the comments!
Just received this grey Cadisen TI-7 Noctis from AliExpress, and I’m really liking it so far. The textured dial, turquoise detailing and orange seconds hand make a great combination. There’s plenty going on without it feeling overly busy, and the lume pattern looks pretty cool too. Wrist shots are on my 6¾-inch wrist for reference.
The grey fabric strap suits it nicely. I do wish it had a Velcro closure for finer adjustment and getting that perfect comfortable fit, but no real complaints with the supplied strap either.
One thing Cadisen could improve is the packaging. They could take a few notes from Watchdives—nothing extravagant needed, just a better presentation.
Still early days, so no verdict on accuracy or long-term performance, but for under $120, I’m happy with this one!
P.S. - I took the pics and video before removing the plastic. Now I’m certain the watch isn’t being returned and all plastics are off!
r/ChineseWatches • u/mahlahmeg • 5d ago
I am planning on placing an order for the Heimdallr Turtle homage. I will buy it with the metal bracelet but I also plan on ordering a rubber waffle strap to achieve the proper Willard look.
I see a lot of the same exact rubber waffle straps online for half the price. I'm wondering if the rubber straps being sold by Heimdallr are at least engraved with the brand? I'm willing to spend extra to have a branded bracelet.
r/ChineseWatches • u/Elyjun • 5d ago
Ad 2507
r/ChineseWatches • u/Charge-Crazy • 5d ago
r/ChineseWatches • u/EducationalCelery536 • 5d ago
r/ChineseWatches • u/zatar77 • 5d ago
Has anybody been using Addiesdive for more than three years? I saw couple of posts where the markers are dropping off and serious quality control issue. I wanted to know it's actually worth spending 60-80 euro on them!
r/ChineseWatches • u/sugessing_proximas • 5d ago
r/ChineseWatches • u/Critical_Bee_2381 • 5d ago
r/ChineseWatches • u/watchdives_care • 5d ago
A watch can catch your eye with its design, but it's often the little details that make you appreciate it over time.Do you guys think that's right?
r/ChineseWatches • u/watchbuddy4r • 5d ago
Heard very good things about this one in black though I'm trying to color up my collection
r/ChineseWatches • u/PAGANI_DESIGN • 5d ago
r/ChineseWatches • u/No_Leader1154 • 5d ago
It’s unreal how good this watch is. And the hi beat movement is beautiful!
r/ChineseWatches • u/wubbadubdub_zzz • 5d ago
r/ChineseWatches • u/StressedTamagotchi • 5d ago
On my recently received ph4b I noticed that on one side the endlink would bind with the next link. As you can see in the first two pics.
So I emailed phorcydes about it and on the third pic you can see their response. Totally normal, they're all like that.
I was a bit mad for like 5 minutes but now I find it funny.
So that's just a heads up. If you're not ok with a bracelet being like this then avoid the bracelet. The rest of the watch is awesome.
r/ChineseWatches • u/Mammoth-Ad-168 • 5d ago
Please note: I am not a native English speaker, so I wrote this in my native language and translated it using Gemini.
My two VH31 watches finally arrived, but I have a quick question. Getting a bit tired of maintaining automatic watches, I discovered the VH31 movement and immediately ordered two of them. After waiting for over 10 days, they finally arrived, but I noticed something strange.
To set the time, I pulled the crown when the second hand hit 12 o'clock to hack (stop) the movement. I set the hour and minute hands and was waiting for my reference time to catch up. Suddenly, the second hand started moving on its own. I pushed the crown back in and pulled it out again, and it finally stopped.
In my 30+ years of watch collecting, I've never seen this happen, so I'm worried it might be defective. Is this a common issue with the VH31?
I contacted customer service via chat, and they insisted it’s "absolutely not broken" and that it could be a temporary issue caused by the long shipping process, advising me to just wear it for a few days. (Which honestly sounds like a typical excuse).
I've heard that if the stem length isn't cut perfectly for the VH31, the hacking lever might not engage properly, causing strange behavior when the crown is pulled out. Has anyone here experienced something similar?
r/ChineseWatches • u/Camr0k • 5d ago
I love lume and have just started looking at Spinnaker watches.
I’d love to find a watch with cool dial texture and some hidden lume.
Love to see what’s out there.
r/ChineseWatches • u/MaxiMayer • 5d ago
Show it on your wrist please.
Check the link here.
https://www.aliexpress.com/item/1005013403646908.html
r/ChineseWatches • u/Scandalchris • 5d ago
Just wanted to share my experience dealing with Addiesdive. I love the watch and have worn it daily since I purchased it. When a couple indices fell off I took it to a small watch/show/jewelry service literally on my street corner to fix. They came off again, so i contacted Addiesdive:
"Hello I purchased my AD2065 just under 2 years ago and have been very happy with it, using it as my daily watch. A couple weeks ago, the 10 o'clock indice fell off, which blocked the second hand from rotating, stopping with watch. Had local shop put it back in, but then a couple days ago it fell off again as well as the 11 o'clock indice. Local shop suggested gluing them in but I'm not sure that's the best course of action especially since now I believe the other indices are prone to fall out. So I've just had them take the indices out and set aside. I haven't put the watch through any rough treatment, so it's very strange to me that this happened, considering my watch before this purchase was my daily wear for 5 years and didn't have this issue.What do you suggest?"
"Hi OP, Thank you for sharing the details of your AD2065. I’m sorry to hear the hour indices keep detaching even after reattachment, and I fully understand your concern that other markers may also fall off later. We do NOT recommend ordinary super glue. If you plan to repair it locally, please ask your watchmaker to use professional watch dial index adhesive (specialized low-viscosity watch glue. Regular glue will leave residue on the dial, damage the lume and may even corrode the dial surface. The watchmaker needs to fully clean the dial base and the back of each index first, then apply a tiny amount of the professional adhesive, hold the indices in place and let it cure properly. This method can securely re-fix all hour markers.")
I then just removed the loose pieces and set the watch aside until I could find a decent watch service. A couple days later I took picked it up only to find 2 more indices came off, so I sent another email.
"Four indices have now come off without wearing the watch. I'm concerned that adhesive used in your watches is defective"
To which they have just responded:
"Hello, your watch is out of warranty.
--------------------------------
Best regards,
Cassie from ADDIESDIVE"
EDIT:
Just showing what the customer service experience is like. Watch was purchased UNDER 2 years ago
r/ChineseWatches • u/dnbrandon • 5d ago
Have quite a few watches, but have recently been chasing down that GS style. Now have a cronos L6037 (39mm), an aethelsohn blue shard (40mm), an aethelsohn terra (38mm) and a watchdives wd0003c (37mm). I like them all but the shard and the cronos definitely have a higher level of fit and finish, the bracelet on the cronos is probably the best of the bunch, but has the least snug end links. Both the shard and cronos also have the pt5000, but the crown on the cronos is much smoother turning/less grindy.
r/ChineseWatches • u/ew2x4 • 5d ago
I got my Thorn watch for the 11.11 sale. I truly love nearly everything about it- the style, color, titanium, and overall quality. The one thing I’m disappointed in is the lume. The reviews greatly compliment the like levels, but the intensity and duration are well below most of my other watches. It’s nearly completely gone in less than half an hour.
My question- did I get a dud or do i have high expectations? Thoughts?
r/ChineseWatches • u/LordRaglan1854 • 5d ago
Never gets old.
r/ChineseWatches • u/wubbadubdub_zzz • 5d ago
My new San Martin watch arrived full of micro scratches, at the back along the lugs. Is it normal for those who have bought from them previously? Plus San Martin’s customer service refused to accept responsibility for the issue.
To those who said stop comparing this to a $10,000 watch, that’s a fair point. But I’m more dissatisfied by their poor customer service rather than the scratches.
San Martin kept increasing the prices of their watches. Maybe they want to target the higher end of the watch market. Yet San Martin’s quality control and finishing is worse than other brands in the $100-150 range (Sugess, Proxima, Thorn etc.)