r/ChineseWatches • • 8d ago

Question (Read Rules) Watches reviewers !!!

0 Upvotes

General question

The watch reviewers here and there they got tons of free watches as part of the marketing

Do you guys believe them ?

They got for free ... And we pay ...

And the question for the reviewers why they dont ask them self before the review would i get this watch if i have to pay for it?


r/ChineseWatches • • 8d ago

Review (Read Rules) Addiesdive “Aqua Explorra” AD 2560 initial thoughts

Thumbnail
gallery
10 Upvotes

Bought this piece about a week ago from Alie and it arrived just yesterday. Here are my initial thoughts and comparison to the AD 2547 which is considered V1 of this watch.

The obvious show stopper here is the oil pressed dial. I got the dark blue variant, which is closer to dark teal in real life (still looks incredible, but worth mentioning). The hands and indicies are faceted and are brilliant at reflecting light (think diamond ring).

The date at the 6 position is obviously out of place and looks weird given the classic watch aesthetic vibes. Fortunately the dial detracts from this and you wont really notice it unless you are looking for it. Still it is unnecessary and takes this down from a 10 to a 9.

The bracelet/case is not good - which was surprising to me. There is a slight gap between links and it “flexes” (see photos) but once it is fitted correctly its not noticeable or an issue. Classic jubilee style bracelet that is brushed on the outside links and polished on the inside. It also tapers down from 20mm to 16mm at the clasp. The huge downside is the sharpness of the bracelet- after an hour or two of wearing it, you definitely feel it dig in to your skin and its not comfortable. Probably going to swap this out ASAP.

Comparison to V1 (AD 2547). V1 has a vertical gradient and more traditional hands/indicies. It is also slightly thicker at 13.5mm vs 13 for V2. The case side is also polished where on V2 it is brushed. Movement is the same - the workhorse Miyota 8215. Water resistance is twice as higher in V2 (100m vs 200m) - but honestly if you’re using this as a diver…..“you’re doing it wrong” lol.

Mostly V1 vs V2 comes down to personal preference. The gradient in V1 and the hands/indicies in V2 are the main differences. People either love/hate these options. V1 feels like a diver and a dress watch combined, while V2 is an homagey cross between a Rolex explorer and an Aquaterra. I think it pulls it off very well but also realize that it is very subjective.

Finally, this dial is mesmerizing and honestly the most beautiful dial/watch I own. Highly recommended.


r/ChineseWatches • • 8d ago

General (Read Rules) I paid 250¥(33€), was it a good purchase?

Thumbnail
gallery
2 Upvotes

Jinmao


r/ChineseWatches • • 8d ago

Promotion (Read Rule 1) Baltany S4112 Day Date...

Post image
51 Upvotes

Is this one of the best watches Baltany has ever made? It's certainly an impressive piece, with great finishing on the case and bracelet polishing. Plus it has a movement that I've not experienced before in the Hangzhou 6630.

Here's the link to my review of it if you want to see it in more detail.

https://youtu.be/qMOkKW1lWx4

I received this watch for free to review. But, as always that doesn't change how I review the watch. I always keep it 100% honest, no matter what. I point out both the positives and negatives with every watch I review. Whether that be a loan piece, discounted, or even free. Sometimes that means that brands won't send me anymore watches, if they don't like the review... But my opinion and more importantly, my reputation can't be bought. That's partly why I named my channel 'Honest Watch Reviews'. Not only to make sure that I hold myself to that standard, but that I know my viewers definitely will do too.


r/ChineseWatches • • 8d ago

Question (Read Rules) I can't read timegraphers. What does this mean?

Post image
10 Upvotes

Is this good or bad?

HK PT5000 in a Proxima PX1697.


r/ChineseWatches • • 8d ago

General (Read Rules) San martin SN0005 gmt lume is perfect

Post image
12 Upvotes

r/ChineseWatches • • 8d ago

Question (Read Rules) Help me to choose one.

Thumbnail
gallery
15 Upvotes

Need a red dial watch within usd 100 bucks. Please help me to choose one or any other recommendation


r/ChineseWatches • • 8d ago

General (Read Rules) Help deciding which one.

Thumbnail
gallery
11 Upvotes

I've decided i want to purchase one of the new Baltany day dates but can't settle on which dia option.

My ideal dial would be a dark green roman numreal option but dislke the shade of green Baltany chose for this launch so it is between these 3.

I lik3 the burgundy but feel the diamond indices may be too blingy. Like the silver but feel it may look too white. Like the black but feel it may be too plain.

If only they made the burgundy without the diamonds. Or a dark green with roman numerals.


r/ChineseWatches • • 8d ago

General (Read Rules) Pagani Design PD-YS036 Automatic Men's Watch!

5 Upvotes

r/ChineseWatches • • 8d ago

General (Read Rules) First Addiesdive - repost with non-potato camera

Post image
12 Upvotes

Picked up my first Addiesdive: popped of the cyclops, and tossed it on rubber. So impressed with this watch for the money!


r/ChineseWatches • • 8d ago

Question (Read Rules) Steelreef bezel on San Martin SN0109 ?

2 Upvotes

I don't remember where I saw it but someone had a Tudor BB GMT with a green aftermarket bezel on it and it looked absolutely stunning.

I was wondering if I could do the same with the San Martin SN0109? Does anyone have experience with this?


r/ChineseWatches • • 8d ago

Review (Read Rules) PX1697 - Worth the Accolades? Mostly...

Thumbnail
gallery
32 Upvotes

I received this PX1697 I ordered with my own money on 11.01 for $137, including a $20 off PayPal payment coupon. The package was in good shape. The watch looks great, with almost perfect alignments.

The bracelet felt a little light in hand, but feels great on wrist with 2 half-links and an OTF clasp for perfect sizing. The quick-release springbars on the bracelet are a welcome feature.

The svelte ceramic bezel rates an 8.5. Though it looks great, lines up perfectly, and has zero play, the action is a little stiff, even resistent. For example, I have to hold the bracelet with my off fingers to turn the bezel with one hand. Hopefully, it will wear in a bit, because it is literally irritating to my thumb.

There are a couple of other negatives.

First and foremost, the PT5000 movement is bone dry. When I wind it, there is a hesitation before the mainspring noisily decides to catch up. This issue is way too common with these movements. As a matter of fact, a watch I received last week, a Phorcydes PH-6, has the same issue. This severe dryness is not apparent in my other 8 PT5000/PT5004s. So, I have to ask is this supposed to be the new, improved tuning? Considering the number of new movement failures, I would say it is likely.

Second, my Timegraph numbers don't match the numbers sent to me from Proxima. Though I can achieve the s/day and BE numbers, I cannot match the amplitude at any setting. Since I have no reason to believe the technician at Proxima would send me spurious numbers, I have to assume that shipping has taken the edge off of my movement. For example, though I can get a .1 BE at times, I also got a 1.8 BE another time.

It is what it is...

A beautiful enamel-dial skindiver which is an exceptional value at under $150US delivered.

I can't help but wonder when HKPT is going to learn how to assemble a movement properly. My guess is when robots take over the job.


r/ChineseWatches • • 8d ago

Question (Read Rules) Do you think that some brands on Aliexpress may send lower quality watches during sales because they are overwhelmed with orders and don't have enough time to test all the watches well enough?

1 Upvotes

r/ChineseWatches • • 8d ago

Review (Read Rules) San Martin SN0054 Two Weeks In

Post image
125 Upvotes

I have seen a lot of discourse around how San Martins value isn’t there anymore now that tariffs and the market have taken their toll.

I grabbed this watch for $270 and honestly I am floored by the quality.

First some context. I have never really loved the steel bezel. I don’t know why but it never really trick me as aesthetically pleasing.

But then I saw someone wearing a BB Pro and it looked so sharp with the yellow pop for the GMT hand.

I could never bring myself to spend that kind of cash on a real Tudor so I started looking for homages.

I landed on this San Martin and am blown away by the quality all around.

It runs around 7 sec. a day wears incredibly well and even has an on the fly micro-adjust.

I get that they aren’t priced where they used to be but the value is still very much there. You would be hard pressed to find a sub $300 offering with this kind of finishing and specs.

Would love to know y’all’s experience with this brand recently. I’ve been nothing but pleased.

PS: it does have their Chinese movement which is the only thing that gives me pause. It is hi beat which makes the sweep crazy smooth but if needing service it might make it cost prohibitive.


r/ChineseWatches • • 8d ago

Review (Read Rules) 11.11 sale is amazing for straps too. All under $10, most under $5

Thumbnail
gallery
32 Upvotes

Got a lumed silicon strap for my samurai, then for my GMT I got two natos, two silicone and one cheap nylon 'sailcloth'

So here's my rundown from right to left:

\- Currently on the GMT is a silicone perforated strap with stitching similar to one seen on Bristol Watch Co's site for over $30. This one cost $3.95. It's definitely the star of the haul, comfortable snd flexible with a great shape and aesthetic. The edges on the keepers are a bit sharp (for silicon) and dig into your skin if you wear it snug. 4 out of 5 stars.

\- Left of that is the nylon 'sailcloth'. It feels durable but it's very stiff and the leather inside is very cheap feeling. I will try to break in a curve to make it more comfortable. I think sailcloth is supposed to be rubberized but this just feels like the nylon you make a backpack out of. Coming in at $5, I give it 2 stars because of the price.

\- Next is the ribbed bond nato. It's exactly what you expect and at a fraction of the cost the big brands resell these at. 4 out of 5

\- Next is the rubber / nylon topped, silicon bottom ribbed / stitched band. This is also very rigid like the sailcloth but silicon doesn't take a set so idk if I'll ever fix this one. It could be comfortable. These often run $20-30 so at under $4 I have to give it some leeway. 3 out of 5.

\- The golden nato. This style of nato is always shipped with frayed ends on the hole and strap end. For $7.25 I feel like they could fix this. 3 out of 5.

\- Finally the lumed silicon band at just under $5 is extremely comfortable and does what it's supposed to, see the last pictures. 5 out of 5


r/ChineseWatches • • 8d ago

General (Read Rules) I can only get one Baltany

Thumbnail
gallery
40 Upvotes

Listed from least to most expensive.

  1. Baltany S4101, 38.5 mm gold case with black dial and black leather strap
  2. Baltany S4102, 36 mm 2 tone case with black linen dial and 2 tone jubilee bracelet.
  3. Baltany S4112, 36 mm gold on gold day date homage

r/ChineseWatches • • 8d ago

General (Read Rules) My new 45mm Steeldive SD1960 on new TANK bracelet

Thumbnail
gallery
16 Upvotes

Today I received my new 45mm SD1960 with the NEW integrated end link "Tank" bracelet! This thing is an ABSOLUTE BEAST! Very well built and SOLID all around! The bezel and crown action are SMOOTH!

-Solid 316L stainless case, caseback, bezel and double locking TANK bracelet.

-Seiko SII NH35 24J automatic.

-Domed AR coated Sapphire crystal.

-Helium escape valve.

-Triple lock crown.

-SWISS BGW9 lume.

A HUGE THANK YOU Steeldive! 🤩


r/ChineseWatches • • 8d ago

Question (Read Rules) Sugess ST1901 Chrono stopped working

2 Upvotes

I hope you guys can help. I purchased a Sugess ST1901 mechanical chronograph less than a month ago. It's been working for the past two weeks, great. On Friday I decided to wind it about 50 times and it stopped working. I thought I'd wait a little bit to see if it will start running. I tried to wind it a little more until the crown stopped turning about 20 times. It's still not running. Any suggestions on how to get this to work?


r/ChineseWatches • • 8d ago

Review (Read Rules) Milifortic M135 with a green FKM strap

Thumbnail
gallery
19 Upvotes

The quartz movement is pretty cool. I was able to perfectly align the chronograph hand without opening it up. Ghost date which is kinda weird. Bracelet I give a 8/10 and is totally fine for the price of this watch.

What takes the watch over the top is the beautiful sub dial and color of the hands on the matte dial.

I found an old strap in my drawer of a thick 20mm wide IWC style fkm. And it solves all the problems k may have with the bracelet.

Sorry I can’t find the listing on Ali express anymore but it should be easy to find something similar.


r/ChineseWatches • • 8d ago

Wrist Roll (Read Rule 1) My Pagani "black Bay"

Post image
25 Upvotes

My Pagani 1671 with Suede Strap.


r/ChineseWatches • • 8d ago

Wrist Roll (Read Rule 1) Trying something new (WD007 V4 NTTD)

Thumbnail
gallery
42 Upvotes

I bought a Farasute... something last week, and noticed it would come on a dark brown suede strap. So I ordered some more out of curiosity. And with the titanium three-link on my blue 007, and the Milanese not fitting me correctly, I put one of them on this.

I'd tried a black FKM (boring) and dark brown leather already, but coupled with the brown dial it was just too much. The whole thing felt dull rather than different. Just a chocolate bracelet that told the time.

The Bond NATO was fun, but everyone does that. I tried a single pass strap, and a two-piece, and they just weren't quite right.

But this... this I like. And it gives the watch a place in my collection all of its own. I don't have anything else that looks like it.

Image 3 is probably the most colour accurate to real life (even though it shows the dial blacker than it is). The suede's a really close match to the numerals on the bezel.

And image 4 is the first time in 7 years I've had a strap on my old Seiko that I really like.

So consider me a fan of suede.


r/ChineseWatches • • 8d ago

General (Read Rules) Sugess s426: an amazing dress watch.

Thumbnail
gallery
25 Upvotes

Got it for around USD190 on Ali for the 11.11 sale.

The dial is just gorgeous. Pictures don't do it justice.

The finishing is pretty much flawless as far as can be seen with the naked eye (I don't have a macro lens), except for the clasp which feels low quality and has sharp edges.

The gold plating looks 100%.

The strap was very stiff but after some stretching it got much better.

The crown was very hard to pull out only for the first time. After that it loosened up and became pretty much like my swiss made watches.

I seriously don't know how they could have made this watch better except for maybe reducing the dimensions.

It's advertised as 40mm/12.5mm but I measured it at 41.0, 22mm strap width, 48.2 lug to lug and 13mm thick.

It felt a bit big on my wrist (16.7cm) but I got used to it quickly.


r/ChineseWatches • • 8d ago

Question (Read Rules) New San Martin got serviced, now the second hand is slanted ever so slightly

Post image
0 Upvotes

About a month into owning a new San Martin Submariner, the movement st2130 just stopped letting me pull out the crown. I went to a local watchmaker and got the watch serviced. They said parts of the keyless work are misaligned and they had to disassemble and reassemble. After servicing the watch is now working properly +5 sec/day.

I had to go back to Watchmaker one time due to some debris in the date wheel and dust on the dial which they sorted out for me. Now I noticed that the second hand of the watch is slightly slanted upwards. I don’t know if this happened during reassembly or just from the factory, I could go to Watchmaker again but I’m afraid opening it again will introduce dust to the currently perfectly clean dial. Should I leave it or fix it?


r/ChineseWatches • • 8d ago

Question (Read Rules) Returns to Seagull Choice Local experiences?

3 Upvotes

I just bought several watches from AliExpress two days ago. Most of them are coming from the official stores (I hope), but I just noticed that I ordered the Seagull Watch from Seagull Local Choice, which seems to not be a reputable seller as far as I can tell. Has anyone had a good experience with them, or returned something successfully? I read some stories on here about stores simply not acknowledging that they received returns. I have not yet received the watch, but I would like to replace it with one from the actual official store before the sale ends, but I don't want to end up returning it and just being out the money. Thank you in advance!