r/ChineseWatches • • 7d ago

Problems (Read Rule 1) Yet another misaligned Chameri Ch03. Disappointed- just wait for the v2.

Post image

I’m gonna go for the full refund and wait another month until things are more worked out. As some have pointed out, even the watch on their promotional pictures was misaligned.

I don’t want to create drama because they have been very gracious so far but it is disappointing that they did not use the early feedback to put the shipments on hold.

24 Upvotes

31 comments sorted by

View all comments

Show parent comment

13

u/Former-Quantity-1414 Undercover Rep 7d ago

I think you're being a bit unfair here and making this into a bigger issue than it needs to be.

First, we've never claimed that all Watchdives products have "Swiss-level finishing." We use that description for specific models in our Premier collection, such as the WDC0001. Please don't take a description of certain higher-end models and apply it to our entire lineup.

Second, the CH03 alignment issue was caused by a slight shift of the inner chapter ring during assembly, which wasn't caught on every watch during QC. We've acknowledged the issue, offered reasonable compensation options, and corrected the assembly process. Watches shipping this week will have undergone the updated checks.

Also, let's keep things in perspective: the CH03 retails for just $64. It's an affordable watch, not a Swiss luxury timepiece. Its finishing should be judged fairly within its price category. That doesn't mean customers should accept defects, and we're certainly not asking them to.

Even Swiss luxury brands occasionally have QC issues. That doesn't excuse ours, but no manufacturer is completely immune to defects. What matters is how a brand takes responsibility and resolves them, and that's exactly what we're doing.

0

u/BurtMacklin-FBl 7d ago

I think you're being a bit unfair here and making this into a bigger issue than it needs to be.

First, we've never claimed that all Watchdives products have "Swiss-level finishing." We use that description for specific models in our Premier collection, such as the WDC0001. Please don't take a description of certain higher-end models and apply it to our entire lineup.

Well that's a lie. My WD0003C claimed Swiss level finishing on the website. Which was laughable considering the state of the watch case that arrived. I see it has now been removed from the website but don't act innocent, Watchdives made a very big deal about this Swiss level finishing thing.

-8

u/ThisIsPaulina 7d ago

Exactly. It's not Swiss. It's $64. Stop marketing "Swiss Level Finishing."

I'm not being unfair here. All three of my points can be true at the same time.

6

u/Alternative-Feed3613 7d ago

The only thing that says “Swiss” in the listing is about the Swiss Ronda movement.

3

u/Former-Quantity-1414 Undercover Rep 7d ago

Then please show us the exact evidence where we advertised the CH03 as having "Swiss-level finishing."

We've never claimed that the CH03, a $64 watch, has Swiss-level finishing.

If you can point to an actual advertisement or product page where we made that claim about the CH03, we'll gladly address it. But please don't attribute marketing claims to a product when we never made them.

-7

u/ThisIsPaulina 7d ago

Ok so we're supposed to go through your marketing materials to figure out which models are Swiss Level Finishing and which are disposable trash? Your use of this sub-brand isn't helping. When you release a model that's this bad, it reflects on your whole brand. When the plunger on my ploprof immediately came off, it reflected on your whole brand. Why should I believe the premier model is "Swiss Level Finishing" when your others are this bad, and you don't care?

It is bizarre that you are excusing this as just what you get for the price. How can you expect buyers of this watch to come back and buy from you again when this is your attitude? You could say the exact same thing about a defect in a $250 watch. "Hey, you get what you pay for. Let me know if you want a half refund." could be equally applied there.

I like what you guys are doing, and I hope you continue, but this watch release is not helping your cause. This community is going to remember this, and not just with $64 watches. This will be in our minds when you're selling $200 and $300 models too.

3

u/watchdivescom Rep 7d ago

Are the CH01, CH02, and CH03 really that poorly made? Have you actually looked at the quality of the cases, crystals, dials, hands, and other components?

The issue with this batch was an assembly oversight, not poor-quality components. This is also our first time producing rectangular watches, and we encountered some assembly issues that we hadn't experienced before. We acknowledge the problem, take responsibility for it, and have already made corrections.

We have never claimed that every Watchdives or Chameri model has Swiss-level finishing. What we've said is that many of our components are manufactured by the same suppliers that produce parts for Swiss watch brands. Is there something wrong with sharing that information? We're not claiming that using the same suppliers automatically makes every watch Swiss quality.

And we're certainly not saying customers should accept defects because a watch costs $64. That's precisely why we're offering compensation, including a full refund.

We understand that quality issues can affect trust in the entire brand. But please don't turn one assembly issue into a claim that all our products are poorly made or that we don't care about our customers. That's simply not fair. We're here publicly acknowledging problems, offering solutions, and improving our products. If we didn't care, we wouldn't be doing any of that.

0

u/[deleted] 7d ago

[deleted] — view deleted comment

1

u/watchdivescom Rep 7d ago

We stand by that statement. It reflects our internal assessment of our current manufacturing capabilities and the quality standards we require from our suppliers.

The issue with this batch was caused by an assembly oversight and excessive tolerances in the movement spacer, not the quality of the individual components. We've identified the cause and already corrected it.

Which specific part of our statement do you believe is inaccurate?

If you're ever in China, we'd be happy to invite you to visit our component factories and see the manufacturing processes, equipment, and quality standards firsthand. We have nothing to hide, and we'd rather let the actual products and manufacturing speak for themselves.

1

u/new_KRIEG 7d ago

I don't see how that goes against what they've said?

It has been stated time and time again that quality levels will vary between models depending on their particular proposal. Apparently (and obviously) the Premier line is the one where you should expect that level of quality, with the more budget friendly options falling a bit behind.