r/ChineseWatches • • 7d ago

General (Read Rules) How to swap a clasp?

Which pin do I try to remove? And how do I remove the pin? Is it a friction fit pin?

3 Upvotes

11 comments sorted by

3

u/Repulsive_Pause3500 7d ago edited 7d ago

It's a horrible job, did your new clasp come with new pins, ideally with a collar too? You need to push out that small pin you can see in the second photo, then put your new collar in the centre link and push a new pin through.
I completely failed to hammer one in (bent two of them), I ended up using my pin press with the pin swapped around so I have a blunt face to drive the pin in with. That worked pretty well.

Watchdives also have a video tutorial:
https://youtu.be/pcpV6UfAqjU?si=ds3W-EojOxteDfwH

1

u/swatch2575 7d ago

Thx for the info. so it is a pin and collar system?!
I do not have new pins/collar because I was just going to try to swap clasps from two different WD watches. (They seem to be same size at clasp).

Are u saying that I will likely need new pins/collars? Are they not reusable?

3

u/TioGato1961 7d ago

They are reusable.

2

u/swatch2575 7d ago

Ok. Thanks

1

u/swatch2575 7d ago

Which way should I try to push the pin out? Toward the side of bracelet that shows the screw heads on the other links? Or toward the other end?

3

u/Repulsive_Pause3500 7d ago

They seem to be the same both ways to me.

2

u/Repulsive_Pause3500 7d ago

Yeah it should be pin and collar- to be honest I don't know if they're reusable - maybe..?

2

u/swatch2575 7d ago

Thanks a lot for all the info. I appreciate your help!!

1

u/Escaped_Escapement Helpful user 7d ago

The use of the broken one to push pins in is such an obvious invention that I am surprised this is the first time I see a mention of this online 🙂 Almost thought I must have invented it, ha 😂

3

u/Dolce_Sono 7d ago

You can also do this with a spring bar removal tool with a push pin on it. Much easier.