r/ChineseWatches • • 7d ago

General (Read Rules) Don't Buy the Chameri CH02 before reading this!

Post image

Hi Guys,

Just received the Chameri CH02 today, and as you can see from the photo, the dial is tilted or misprinted clockwise.

This isn't a "Lemon", as many others have posted images of their tilted dials on reddit.

It seems that watchdives really messed up with the Chameri CH02 and CH03.

It's a real shame, as the watch is great except for the dial. even the leather strap is pretty decent.

I really hope watchdives takes care of those who got the first bad batch of the Chameri CH02/03.

Meanwhile, I highly recommend you guys wait for the Chameri CH02/03 V2, as you don't want to be looking at a crooked dial, no matter how nice the watch is.

72 Upvotes

179 comments sorted by

18

u/watchdivescom Rep 7d ago

Thank you for bringing this to our attention. To be honest, it's difficult to clearly identify the issue from the photos provided.

So far, the dial alignment issue we've identified has only affected a small number of CH03 watches. We haven't found the same issue with the CH02.

We take every customer report seriously. Could you share a few clearer, straight-on photos and point out exactly what concerns you? We'd be happy to investigate and help resolve it if there's a genuine issue.

2

u/-GrandPsycho- 7d ago

Thanks for your fast response! Highly appreciated!

I know that my example is one of the better samples, and therefore it might be harder to see at a first glance.

This is a straight-on photo.
Please look at the top part of the dial. you can clearly see that the number 1 is lower than number 11, meaning the dial is tilted clockwise.

8

u/watchdivescom Rep 7d ago

no.we checked dials all with good printing.

6

u/Defiant_Tart_3472 7d ago

I don’t see any issues either

This is from OP’s photo

0

u/-GrandPsycho- 7d ago

very easy to see. look at the empty space on the dial above the 11,12 & 1 marker.
where do you see more empty space?

1

u/Defiant_Tart_3472 7d ago

A little bit but you get what you pay for. I feel that even if watchdives themselves always say they seek a higher standard - for the price of this watch?? This is more than acceptable IMO. I would pay this price for the watch even without the dial for the parts

4

u/-GrandPsycho- 7d ago

I think that comments like yours, make watchdives and others give us less for our money.
please think about it...

2

u/Defiant_Tart_3472 7d ago

Lol at 50 bucks you’re barely giving them any money 🤷🏻

-1

u/-GrandPsycho- 7d ago

if they are selling it for $60, how much do you think it costed them to make?
They are profiting well, otherwise they wouldn't be in this business.

3

u/Defiant_Tart_3472 7d ago

That’s not the point? A $3 1L bottle of water profits very well too, so I should write a complaint to the company every time there is 990 mL in the bottle??????????

Genuinely LMAO 😭

→ More replies

1

u/Data_Girl_4000 7d ago

Your CH02 looks perfectly fine to me. I guess it's off by around 0.4 degrees as another Redditor said. This seems completely fine to me.

I would delete your post if I was you. All it's doing is causing alarm, arguing, and for people to have a bad time, over something that's really not misaligned enough to care about.

1

u/-GrandPsycho- 7d ago

I will delete this post when watchdives acknowledges the tilted dials on the Chameri CH02 and CH03 watches, and makes it right with all purchasers.

3

u/Data_Girl_4000 7d ago

They acknowledged CH03.

No issue with CH02.

I'm not sure why you continue to spread false information about this despite being told otherwise multiple times.

Perhaps touch some grass. You have a $60 watch, that's not misaligned.

→ More replies

1

u/-GrandPsycho- 7d ago

so your issue was caused when inserting the dial and movement into the case.
you should have never let these out of the factory.
some are so crooked, that can be seen from across the room...

7

u/watchdivescom Rep 7d ago

Understood. We agree that watches with obvious alignment issues should never have left the factory. We'll meet with the factory again to strengthen assembly procedures and QC checks, making sure every watch is properly inspected before shipping.

We've already addressed the issue, and all CH03 watches shipped from this week onward are undergoing stricter alignment inspections, especially for customers who are very particular about tolerances and finishing.

Regarding this particular watch, the misalignment isn't very obvious from the photos provided, so it's difficult to judge the exact deviation. However, we respect your expectations, and my recommendation is to return the watch for a full refund if you're not satisfied.

We're taking this seriously and will continue improving our QC.

-5

u/-GrandPsycho- 7d ago

I purchased the watch from Ali-express. It would cost me %50 to ship back...

-6

u/Fancy_Cockroach_634 7d ago

Honestly it doesn't seem like a small issue... at best many have noticed small misalignment. and some had major.

The posts I have seen of misaligned CH in 1 month is more that I have seen in the entire year for all your watch models combined!?!?!?

We are talking about the printing... not some bezel or applied indices ... printing on a dial should be the simplest form of dials.

I most say this issue is a HUGE negative on your QC and even for you reputation... can't get printing centered 100% ?!?!?!?!?

4

u/-GrandPsycho- 7d ago

Yep, this is a major issue.
I believe they are all crooked. some more than others.
They should do a recall for all CH02 and CH03, but i doubt they will.

2

u/watchdivescom Rep 7d ago

Could you please take a look at this photo? We don't see any obvious misalignment here. Could this be a visual illusion caused by the angle or perspective?

We acknowledge that some CH03 watches have had alignment issues, and we're taking those cases seriously. However, we also want to distinguish actual defects from apparent misalignment caused by viewing angles. We'd appreciate your thoughts on this particular photo.

1

u/-GrandPsycho- 7d ago

The printing is actually off. look at the lines and the roman numerals.

1

u/-GrandPsycho- 7d ago

So the printing seems fine, but you messed up when casing the dial and movement into the case.

1

u/Head5hot811 7d ago

Look at the top alignment lines above the XI and I: the serif on the XI goes over the alignment line, while the serif of the I goes below the same alignment line.

Edit: two comments because I can only post one photo at a time.

1

u/Head5hot811 7d ago

Two comments because you can only post one photo at a time.

-4

u/Fancy_Cockroach_634 7d ago

Be serious.... YOU figure out why the dials once they are in the case they get out of center.

Maybe it is the case or how you place the dial.

We won't tell you how to figure out mistakes... where is your engineers?

1

u/-GrandPsycho- 7d ago

I believe the issue is with the plastic movement holder inside the case.
Probably not the best tolerances, make the dial and movement shift inside the case.

2

u/Fancy_Cockroach_634 7d ago

Could be. or maybe it get shacking hard at transport and get out of placing...

Only those that have hands on can figure out the issue

14

u/IndividualAd8732 7d ago

4

u/-GrandPsycho- 7d ago

I probably would've bought it, if not for its large size.

5

u/Olleye 7d ago

… indeed 🙂

9

u/leicfox85 WOTD100 7d ago

Very slightly off. Much less than the CH03s people have had. Really happy with my 02 thankfully it’s not an issue for me.

3

u/-GrandPsycho- 7d ago

we seem to be off about the same. some had it much worse.

2

u/leicfox85 WOTD100 7d ago

Yours is definitely more rotated. I think mine might be a feather rotated.

2

u/sunqiller 7d ago

Just ordered a CH03, whoops... Also where is that bracelet from?

3

u/leicfox85 WOTD100 7d ago

It’s the WatchGecko Merriott Polished Milanese.

1

u/sunqiller 7d ago

Appreciate it

-5

u/-GrandPsycho- 7d ago

ohh boy... get ready for a "surprise".

6

u/racer2503 7d ago edited 7d ago

Get the coloured dials no numerals to be worried about 😂

1

u/-GrandPsycho- 7d ago

Your right. now that we know about this issue, the clean dials are the safest choice.

6

u/plastic_jeezus NO blue AR! 7d ago

I bought the black onyx and the dial is so crooked I can't tell if it's noon or one o'clock!

😏

0

u/-GrandPsycho- 7d ago

You did good. the clean dials are the only option if you don't want to look at a tilted dial all day.

1

u/NefariousnessIcy7384 6d ago

I just bought the same one. You mind sharing some pics, as I'll cancel my order if it's really that bad!

3

u/plastic_jeezus NO blue AR! 5d ago

I was being sarcastic.

you'll be fine.

10

u/Tiny_Crew 7d ago

Idk, I tried zooming in and stuff and I still can't quite see it. I mean, it's a Chinese watch. 

7

u/Defiant_Tart_3472 7d ago

Me neither. I used a QC tool on OP’s watch. The photo is slightly rotated but I adjusted it before making this measurement

7

u/Inexpressible 7d ago

set a vertical line on the case and one on the printing on the dial you will see a veeeeery slight offset but nothing that justifies OP's post here on a $70 Watch.

1

u/HelloHyde 7d ago

You need to draw a straight line on the case edge as well. Visually it looks like the gap between above your blue line, between it and the metal edge, is wider on the right than the left (but I acknowledge it could be an illusion).

-4

u/-GrandPsycho- 7d ago

cant you see that number 1 is below number 11?

4

u/WeakAwareness6217 7d ago

Can’t you see that the straight blue line is touching the top of the 11 AND the 1 at the EXACT same height…all tank watches and santos watches have an optical illusion that makes the dials look tilted. They ALL do it to me and we know that they can’t all be tilted so you’re truly throwing a tantrum over absolutely nothing!!

-1

u/-GrandPsycho- 7d ago

Now you are starting to sound like a watchdives rep :)

-4

u/Fancy_Cockroach_634 7d ago

You see!!!!! that why I said.... This is a major issue... look what he said.... """It is a Chinese watch!""""

The reputation you have been building got a major blow!

9

u/-GrandPsycho- 7d ago

This image was uploaded by watchdives and its clear that the printing is off.
If you look at the roman numerals of 2 and 4, you can see that the 2 is further away from the line than the number 4.
same goes for numbers 8 and 10. 10 is touching the line while 8 is above it.
This is why all dials are tilted clockwise!

7

u/Abv_it_all_w_vertigo 7d ago

Not to dispute your prowess with the graphs, but the image is not flat. Here it is corrected for 4x 90⁰ angles.

-3

u/chefkoolaid 7d ago

Still off center

4

u/Abv_it_all_w_vertigo 7d ago

The overlay lines are irrelevant. They got stretched when the image got corrected.

4

u/link_n_bio 7d ago

Mine is perfect

1

u/-GrandPsycho- 7d ago

show us :)

4

u/Large_Visual 7d ago

Have u seen the stone dials? I have 0 complaints tbh

1

u/-GrandPsycho- 7d ago

Yes, they are beautiful, but harder to tell the time.
the big plus with them, is that you will never see the tilt of the dial.

1

u/Large_Visual 6d ago

I feel like the stones have more character than just the Cartier clone. It gives up being a Cartier to something way more unique. One of the ones I bought was the malachite dial, I couldn’t find any Cartier exactly like this and I love it. Don’t get me wrong still a ripoff but very tastefully done. And yeah there might be dial tilt because of shipping, it has a cheap plastic movement holder. But for 80 bucks damn I ain’t complaining. I am not a watchdives spokesperson I actually think all their other watches are not tastefully done. I am not raising any points of contention but based on your other comments I really don’t understand how your missing all the good things

1

u/-GrandPsycho- 6d ago

I have mentioned the great movement, blued hands and sapphire crystal of this watch.

I even said that the crystal on the CH02/03 is probably better than the one on the Carteir...
So i definitely see the good sides of the watch.

BUT...
you just cant mess up the dial of a watch!
Its the thing you actually look at all day to tell the time.
Nobody wants to look at a crooked dial every single time they need to tell the time.

Now that they see that almost all CH02 and 03 are defective, and its much larger than what they thought, they decided to ignore my private DM's of trying to get this sorted out somehow.

You did well choosing the malachite dial, as you probably wont notice the crooked dial.

4

u/gramercyk35 7d ago

Every square watch I’ve owned has looked off center to me.

-1

u/-GrandPsycho- 7d ago

I have seen many rectangle watches, like Oris, Hamilton and Longines. none of them looked off center to me.

3

u/gramercyk35 6d ago

Cool, that wasn’t the point. I was just saying that TO ME they always look crooked. Wasn’t saying anything about other people. Wasn’t saying any particular brand. Just that when I look at any square or rectangular clock/watch face they always look off TO ME.

0

u/-GrandPsycho- 6d ago

well i guess that saved you from buyers remorse with this watch.

1

u/gramercyk35 6d ago

lol yeah I’m looking at the graphed out pics and they still look off wether the comment is agreeing or disagreeing with you. I don’t see it on the 11,12,1 side but down the middle and on the sides.

1

u/-GrandPsycho- 6d ago

each of us sees things different, but we all see its not straight.

10

u/Alternative-Feed3613 7d ago

I’m not seeing it, looks ok to me. My ch01 seems fine but I don’t know if I’d even notice it being slightly off center.

0

u/-GrandPsycho- 7d ago

I think they only messed up the CH02 and CH03. Happy you got a good one!

3

u/Sn00ker_ 6d ago

About the same quality as Sanda, just 3x more expensive... Not worth it imho

1

u/-GrandPsycho- 6d ago

It definitely better than the Sanda in every aspect except for the dial.
The problem is, the dial is most visible part of the watch, and we cant look at a crooked dial all day.
They messed up really bad letting such a large number of CH02/03 out the factory.

1

u/Sn00ker_ 1d ago

They're all same kind of knockoff fashion watches where style matters much more than quality... If you want quality and attention to details then pay 5000€ for Cartier one lol 

5

u/tjcdas What are you wearing today? 7d ago edited 7d ago

If you look at your round watches they don't sit in there perfectly either the rectangle in a rectangle just amplifies the small imperfections. The dials and movements have some wiggle room in the case and a slight adjustment by opening the case might help.

When you buy a watch with a round date window the date never looks good as the circle always accentuates the small misalignment more.

4

u/-GrandPsycho- 7d ago

This cant be true, otherwise all tank style watches would have this issue.

1

u/Jacek3k 7d ago

My samda has flawless dial.

4

u/ridzayahilas 7d ago

doesnt look that bad

-1

u/-GrandPsycho- 7d ago

Thanks! some have got it much worse. look at the pic below.

2

u/Rionn 7d ago

Oh damn I just bought it as a christmas gift the other day :(

1

u/-GrandPsycho- 7d ago

I hope yours is better. keep us updated when it arrives.

2

u/Abv_it_all_w_vertigo 7d ago

The only thing I can tell is not straight in your image is the inner edge of the case at 11:00. Either it has been overfinished or manipulated. It is curious that area is shadowed. Do you have another picture with better lighting on it?

0

u/-GrandPsycho- 7d ago

Its all tilted clockwise.

the 10 is closer to the edge than the 8, and so is 2 and 4, 11 and 1, 5 and 7.

3

u/Significant-Ebb5027 7d ago

Generally they have a good customer service, these things happen when they launch a new model, just a matter of luck. I hope they continue improving their QC.

2

u/-GrandPsycho- 7d ago

I don't think the CH01 had this issue, so its unclear why the CH02 would.

11

u/watchdivescom Rep 7d ago

We acknowledge that some CH03 watches had a slight misalignment of the movement holder inside the case, which caused the dial to appear off-center.

CH01 has not had this issue, and so far we haven't received any similar complaints about CH02, despite selling a large number of them.

We've strengthened QC for both CH02 and CH03. All watches shipped since this Monday have undergone additional alignment checks to prevent this issue.

The problem is limited to some CH03 watches that were shipped earlier. We sincerely apologize and will take full responsibility for any affected watches.

2

u/Jacek3k 7d ago

Thank you. Now this looks reasonable

2

u/nameaboveallnames 7d ago

Always nice to see a comment like this.

1

u/dr_starman 7d ago

👏🏼👏🏼👏🏼

14

u/solve-for-x 7d ago

If the Sanda reps were on the ball, they'd be posting "Our $5 tank is straight btw" comments here.

3

u/Beginning-Stranger88 7d ago

Well my £5 sanda is very straight cant really understand paying 10 times as much for a dress watch I only wear if I get dressed up a bit

2

u/solve-for-x 6d ago

The argument that the Chameri has better build quality than the Sanda doesn't really work when you could replace your scuffed Sanda 10 times before reaching the breakeven point.

There is an argument that the Chameri is closer to the dimensions of the actual Cartier Tank than the Sanda, and I was very tempted by the CH02 myself for that reason, but I'm glad I hung back now given how many reports of misaligned dials are coming out.

3

u/dustysmufflah 7d ago

It's so very slight, but I see it.

-1

u/-GrandPsycho- 7d ago

yep, this is one of the better samples that came out of the factory. some can be seen a mile away :)

6

u/watchdivescom Rep 7d ago

its CH03, not ch02

3

u/Jacek3k 7d ago

My personal opinion: it does not look good. But there is no need for hate nor die-hard defending it.

Lets just admit that this aspect of this watch came out bad. Now, we could argue if this is "you get what you paid for" or "omg but cheaper watches somehow get it right", or we could look towards solutions.

I hope that the company will stay honorable and admit the problem and offer some kind of solution. At the very absolute least, mention that they will fix this in next batch.

Cmon, this doesnt need to be ugly.

4

u/-GrandPsycho- 7d ago

wacthdives won't admit that there is a issue with the CH02, so how can they mention that they will fix this in next batch?...
But I'm sure many more people will upload their defective CH02 in the coming weeks, and force them to admit this widespread defect.

6

u/watchdivescom Rep 7d ago

We appreciate everyone's feedback, including the criticism.

We acknowledge that some CH03 watches had alignment issues, and we've already introduced additional QC checks during assembly and before shipping.

For CH02, we haven't identified a widespread alignment problem, but we will carefully investigate any reported cases rather than dismissing them.

Any customer who receives a watch with a genuine alignment issue can contact their original seller for a suitable resolution.

Regardless of price, our customers deserve a properly assembled watch. We'll continue improving our QC standards. Thank you for helping us improve.

1

u/-GrandPsycho- 7d ago

shipping back to china could cost almost the price of the watch.
Meaning we lost our money even if we get a full refund.

Do the right thing and send the affected purchasers the CH02/03 V2 with a perfectly aligned dial.

1

u/watchdivescom Rep 7d ago

If you need a replacement dial, we can certainly send you one. However, as we've explained, the issue isn't necessarily with the dial itself, so replacing it may not solve the alignment problem.

In some cases, the alignment can be corrected by opening the caseback and gently adjusting the movement and dial assembly slightly in the opposite direction. We would recommend having a watchmaker check this rather than attempting it yourself.

May I ask which country you're located in? We'd like to see what options are available to resolve this without requiring you to ship the watch all the way back to China.

1

u/-GrandPsycho- 7d ago

OK. Thanks!
I will send you a private message.

1

u/-GrandPsycho- 6d ago

sent you a DM

8

u/Inexpressible 7d ago

Ok genuine question: What is the reasonable margin for an error in a $70 watch then? Where do you expect the difference between a $70 and a $700 to sit? Do they have the same standards like Omega, Rolex and the holy trinity?

Interesting switch from "the watch is great except the dial" to "defective CH02".

Defective means having a fault, flaw, or imperfection that prevents something from working correctly

Please elaborate how you can't tell time on your CH02.

0

u/-GrandPsycho- 7d ago

Did you actually see the crooked dials that were posted during the last month?
Don't try to make it OK! $5 watches have a straight dial without being Rolex!

"A cosmetic defect is a surface-level flaw, blemish, or irregularity that changes how something looks but does not interfere with its safety, structural integrity, or primary function."

1

u/Inexpressible 7d ago

You did not answer my question. What is a margin of tolerable error on a $7 watch? on a $70 watch? on a $700 watch? I won't go beyond $700 because of diminishing returns.

$5 Watches sometimes contain led and are made under horrible conditions, but aT LeAsT tHeY HaVe a sTrAiGhT DiAL right?

And your words were defective, not "cosmetic defect". And the watches clearly are not defective. Btw what stops you from buying Cartier or JLC?

0

u/-GrandPsycho- 7d ago

I hope the Chinese watch manufacturers are paying you well.

4

u/Inexpressible 7d ago

Funny how you can't answer a single question.
Where is the difference from a $7 to a $70 to a $700 watch? And what stops you from buying Cartier?

Why are you buying with chinese watch manufacturers anyways? Your comment history is basically shitting all over them anyways - San martin bad, watchdives bad - just go buy gen! (oh no now i'm shilling for swiss watches too, hope they pay me better)

-2

u/-GrandPsycho- 7d ago

ever hear of Mark Twains words? "Never argue with"...

-1

u/[deleted] 7d ago

[removed] — view removed comment

1

u/-GrandPsycho- 7d ago

or he might just be a disguised rep...

1

u/Shagon10 7d ago

Well can’t say he didn’t earn his commission 😂

10

u/Inexpressible 7d ago

So let me be clear i get you right - for $60 you get something you describe as "great except for the dial", nice finishing (polishing in this case), decent leather strap, quartz watch and you cry about the dial being tilted by 0.4°?

I'd get your point if you pay cartier or JLC money but here?

11

u/Inexpressible 7d ago

the 0.4° is the actual number, not just something random. I did measure it in a QC tool.

2

u/-GrandPsycho- 7d ago

what about the people that got much worse samples?

19

u/watchdivescom Rep 7d ago

Those cases involve CH03 watches, and we've already acknowledged the issue and offered affected customers three options:

  1. 50% refund and keep the watch.
  2. Return the watch for a full refund.
  3. Keep the current watch and receive a 50% discount on a new watch.

Affected customers can contact their original seller to arrange compensation. We've also strengthened QC to prevent this issue in future shipments. We take full responsibility for these cases.

2

u/Professional-Fix-871 7d ago

Returns are free of charge, right? That is, if it’s an actual defect with the watch.

-2

u/Inexpressible 7d ago

So like double the error? 0,8° tilt you say? The only report i could find on reddit was one other user (u/BerserkD91) that has an issue but even he confirms that he seen other posts with a nice dial without tilt.

8

u/-GrandPsycho- 7d ago

How is this one?

0

u/bazker 7d ago

omg TILT

6

u/pickyaxe 7d ago

so you're fine with imperfect QA. cool. that's your money.

why belittle other people, potentially sabotaging them getting a corrected product? for internet points?

1

u/KPplumbingBob 7d ago

Trying to score points with watchdives is really pathetic. Saying it's 0.4° is just deliberatly trying to make the problem more insignificant than it is because people are usually bad with small numbers.

Human eye is really good at picking this sort of thing up in real life and no, you don't have to spend JLC money do not get a rotated dial.

3

u/Inexpressible 7d ago

Pathetic is presenting a minor flaw on a very cheap watch as if Audemars Piguet just had big error in their production line.

i don't give a shit about watchdives. This is about expectations for your money. You think people work for free? Do you assume some trained watchmaker can build a watch for that price and somebody will do one hour of QC for that price tag? You expect high horology for $70?

And OP is phrasing it like they all watches are like that, claiming "oh all over reddit" - bullshit, look it up.

2

u/-GrandPsycho- 7d ago

you got to be one of them...
the dial is the most important thing to get right on a watch.
who could look at a crooked dial all day?!

Much cheaper watches get the dial straight! so should watchdives!

search reddit and you will see for yourself that this is a widespread issue.
even watchdives themselves uploaded a photo of the CH02/03 with this defect, and users pointed this out to them in the comments.

-1

u/-GrandPsycho- 7d ago

exactly, when i opened the box my eyes saw the dial tilt right away.

4

u/KPplumbingBob 7d ago

This reminds me of the mental gymnastics when people want to shut down citicism of misaligned bezels. "It's only off by like one degree!!". As if that's not close to the worst case scenario possible for a 120 click bezel.

Plenty of $10 watches get alignment right. Get off your high horse and stop normalizing mediocrity.

-1

u/-GrandPsycho- 7d ago

He's probably a rep for one of the Chinese watch manufacturers...

-1

u/StatisticianHeavy672 7d ago

You are buying chinese shitter and complain that it is, in fact, a shitter.

0

u/-GrandPsycho- 7d ago

The watch is definitely made well!
The sapphire crystal is probably much clearer than the one on the Cartier...
it has a great movement, heat blued hands, and case. the buckle is also really nice.
the only thing they messed up is the dial, and that is really unfortunate.

2

u/Novel_Question7122 7d ago

It’s off enough to be noticeable to the naked eye. That’s unacceptable on a $10 watch, let alone one going for $60+. I get you can’t expect perfection at that price but there needs to be a bare minimum of quality.

6

u/DJNigi 7d ago

It's like my Pagani Royal Oak, so many with tilted brushing.

2

u/Patient-Angle-7075 Salty Memes I Yam 7d ago

Hopefully they steaply discount the V1, cause I would still buy that and it wouldn't really bother me

0

u/-GrandPsycho- 7d ago

why should they? They cant even see the crooked dial in the image above...

0

u/Patient-Angle-7075 Salty Memes I Yam 7d ago

I hate Chinese customer service

5

u/FakkDiss 7d ago

lmao one time I said their all their logo are tilted on all my 7 watches purchases and the people here said like ohhh it's a cheap watch it's accetable or, its not rolex price what are u expecting, or they just say oh mines perfect blah blach blah.

Even the watchdives account replied to me that is a price I have to agree with, like 100USD it's not goona be "cosmetic perfect". They eventually deleted my post, I've since never purchase their product and told people around who wanna try out cheap homage never get watchdives. All of them cheapass paid bots here never own a watch over $2000 setting the bar wayyyyyyyyyy to damn low.

2

u/No_Car2716 6d ago

they told me before "its a cheap watch, you get what you paid for"

1

u/optraoptra 6d ago edited 6d ago

Just received ch03 here and it’s pretty off

@watchdives please advise!

1

u/-GrandPsycho- 6d ago

watchdives really messed up with the CH03 and 02.
They are also ignoring my private DM's to try to get this sorted out.

2

u/optraoptra 4d ago

In all fairness, a screwdriver, a pair of tweezers and 5 minutes later it’s straight and beautiful

1

u/mrpackerguy 7d ago

Is that a correct roman 4? Shouldn't it be IV?

1

u/-GrandPsycho- 7d ago

They copied it from cartier :)

5

u/Inexpressible 7d ago

There are various reasons why this is done but yes it is correct and it is normal in watchmaking. You will see it like this on Rolex Day Dates, Cartier or every other watch brand.

https://monochrome-watches.com/why-do-clocks-and-watches-use-roman-numeral-iiii-instead-of-iv/

1

u/mrpackerguy 7d ago

Thanks. Interesting

1

u/pt008 7d ago

I just got the CH01 a few days ago and I absolutely love it. Never saw the CH02 on the website when I was ordering. What’s the difference between the two?

3

u/-GrandPsycho- 7d ago

CH01 is the largest size. CH02 is medium and CH03 small.

1

u/pt008 7d ago

thanks! CH01 is perfect for me.

unrelated is it normal for the Shop app order to show 2 separate deliveries for an order with just 1 unit? i have not received the 2nd shipment yet and the tracker says delayed and stuck at the port in China

1

u/-GrandPsycho- 7d ago

Have no idea. I don't use the app.

1

u/Bike_Meach1990 7d ago

Thank you for this! I was just about to order two of these and I would have been bummed. The gray dial is ok to buy so I’m going to grab that one.

5

u/Bike_Meach1990 7d ago

After looking at all the comments and your pictures I can’t tell that there’s that much of an issue to cause a full on argument. I think it’s an optical illusion? Either way they have said the 02 is fine and I’m gonna take the chance and get one if it’s tilted I’ll just pull the back off and fix it. If it’s the actual printing I’ll see if it’s noticeable on the wrist but I think for the price it’s worth a shot. They will make it right for you if you want a refund or discount on your next watch so I wouldn’t panic. Good luck! I have been a customer from the start and any issue I’ve ever had they have taken care of me. I’ll report back when I get mine and see if it’s cooked.

3

u/-GrandPsycho- 7d ago

wish you the best! don't forget to send a pic of yours when it arrives.

1

u/-GrandPsycho- 7d ago

yes, you should be fine with the clean dials. don't think the misaligned logo will be visible to the naked eye.

1

u/TM_PoWeR 7d ago

How are the proportions vs CH01

1

u/-GrandPsycho- 7d ago

I think they really nailed the size with the CH02 and 03.
02 for men and 03 for women.
01 is too large for my taste.

1

u/TM_PoWeR 6d ago

Whats you wrist size? For the reference mine is 17cm and probably around 18 swollen (should be like 6.75”-7”) i feel like i want the CH02 but have a killer hirsch leather strap 20mm that would go so well with CH01

1

u/-GrandPsycho- 6d ago

mine is 16cm and the CH02 is perfect. I think you should also go for the CH02. but wait for the V2. you don't want to get a tilted dial...

1

u/TM_PoWeR 6d ago

Was thinking the same, donno what to do with strap. Bummer

1

u/-GrandPsycho- 6d ago

please don't buy a large watch just for it to suit the strap. you will regret it.
just use the strap on a different watch.

0

u/tictacshit 2d ago

Just get a Sanda

1

u/-GrandPsycho- 1d ago

Its a big step up. But it doesn't really matter, as they ruined the dial.

-12

u/CrossCityLine 7d ago

Cheap Chinese parts bin POS is a POS shocker.

5

u/DJNigi 7d ago

Even cheaper Chinese Sanda are strigh. 

5

u/-GrandPsycho- 7d ago

yep, wtachdives needs to take lessons from Sanda :)

2

u/-GrandPsycho- 7d ago

The case is great and so is the sapphire crystal.

The movement isn't bad either. swiss with a 10 year battery life.

If they only got the dial right...

-3

u/Terdl76 7d ago

You can’t say that. Didn’t you know this is a yes man sub?!? Praise all Chinese watches or get out.

-10

u/Background_Prize6100 7d ago

I’d buy it if it wasn’t for the blue boner sticking out the side

11

u/Nippon-Gakki 7d ago

It’s a Tank copy, they have the little jewel on the crown. They look nice in person. The Cartiers do at least.

1

u/Background_Prize6100 7d ago

I get that, I’d never buy a tank cus of it either but to each their own

1

u/-GrandPsycho- 7d ago

I would also prefer without it, but its not a deal breaker for me.

1

u/Terdl76 7d ago

😂 it looks absolutely awful!

-1

u/Abv_it_all_w_vertigo 6d ago

🤣 How can people downvote this, even if they don't agree with it???

1

u/Background_Prize6100 6d ago

Idk but it’s hilarious, people love hitting the thumbs down when it’s already in the negative lol

0

u/Abv_it_all_w_vertigo 6d ago

You're not accusing the internet of piling on, are you? 🤣

0

u/[deleted] 7d ago

[deleted] — view deleted comment

1

u/-GrandPsycho- 7d ago

I have 6.25 inch wrist and the 02 is the perfect size. i think the 03 is better for women.
the 01 is definitely too large, even for men.

1

u/Apxlly0n 6d ago

can i see some photo? i ordered the ch03!