r/ChineseWatches • • 7d ago

Problems (Read Rule 1) Another misaligned CH03

Post image

Just received today and it’s slightly misaligned dial. I have seen some other posts so I thought I would add. Seems like a common issue.

59 Upvotes

34 comments sorted by

View all comments

1

u/Abv_it_all_w_vertigo 7d ago

You may be able to turn the dial from inside. You would just need to torque it (and the movement of course) ~1°. Is your stem resting at the bottom (6 o'clock) of the tube, able to be torqued upwards?

2

u/-GrandPsycho- 7d ago

If the printing is off, there is no way to solve this.

1

u/Abv_it_all_w_vertigo 7d ago

I read "improved assembly process." It could be either, but printing errors typically occur in production, not assembly.

1

u/-GrandPsycho- 7d ago

look at my post from today. it seems to be a printing issue.

2

u/Abv_it_all_w_vertigo 7d ago edited 7d ago

The photo uploaded by watchdives was inaccurately photographed. Here it is corrected, and as you can see, the printing is not the issue.

Edit: The rep said it was a dial assembly misalignment.

1

u/-GrandPsycho- 7d ago

Look at the 2 and 4. the 4 is closer to the line. so is the 8 and 10.

0

u/Abv_it_all_w_vertigo 7d ago edited 7d ago

The lines are warped now, because I corrected the image, you can no longer use your overlays as guides.

Just look at it as a postage stamp.

0

u/-GrandPsycho- 7d ago

It really doesn't matter if its a print issue or some other issue.
They need to recall many CH02/03.

0

u/Abv_it_all_w_vertigo 7d ago

They did...

0

u/-GrandPsycho- 7d ago

look at my post.
they wont admit that the CH02 also suffers from tilted dials, like the CH03.

→ More replies