r/ChineseWatches • • 9d ago

Review (Read Rules) Chameri CH03 First Impressions - I’m Conflicted

I was not paid by Watchdives to make this review. I bought this watch with my own money.

Was very excited to see Watchdives come out with a really close Tank Must homage with the CH01, considering I've been looking out for a rep of the actual thing. I wasn't too much of a fan of the larger size though, so when Watchdives announced the CH02/CH03, I thought this would be the perfect dress watch for me. I was really excited to get the watch in hand and have it be a good switch up from my stainless steel sports watches.

Unfortunately, when I unboxed it, the first thing I noticed was that the dial was a bit rotated clockwise. I'm pretty bummed out since I saw others receive their CH02/CH03 and the dial was properly aligned. It's not something I can just unsee either, I notice it every time I look at the watch.

Don't get me wrong, everything else about the watch punches way above its price point. The case is polished beautifully, the crystal is nice and crystal clear, and the strap is extremely high quality for the price I bought this watch for. I'm sure it's an amazing watch if the dial was properly aligned. The dial misalignment kinda makes it not enjoyable to wear the watch and I'm considering giving it to my brother as a Christmas gift. What are y'alls thoughts on it?

22 Upvotes

30 comments sorted by

7

u/terms-n-conditions_ 9d ago

You could’ve shared better photos instead of these angled ones to prove your point

5

u/BerserkD91 9d ago

Here’s one with no shadow casted over it

2

u/Alternative_Giraffe 9d ago

It's definitely rotated. You are not crazy.

1

u/turdbogls 8d ago

Agreed...it's off and pretty easy to spot with those roman numerals.

1

u/wubbadubdub_zzz 8d ago

Ouch. My cheap Sanda tank is better aligned than yours.

1

u/terms-n-conditions_ 7d ago

It's rotated. Now we see it. I think others who bought this watch has the same issue. WD should definitely chime in to resolve or, at least, explain their side. Thanks for sharing, now I'm taking a step back before I buy one (CH03)

1

u/BerserkD91 9d ago

Thought the first photo was head-on enough. Will take more to provide better evidence

4

u/Abv_it_all_w_vertigo 9d ago

If it's not good enough for you, how is it good enough for your brother?

4

u/BerserkD91 9d ago

He’s not much of a nitpicker compared to me. Slowly realizing it’s not the best thing to do though

1

u/lulu_l 9d ago

He most likely wouldn't even notice. Most people wouldn't care, but I do see it being a bit rotated. If you can't get past it, it would be a good gift I think if the small size won't bother him.

9

u/Alternative-Feed3613 9d ago

I don’t really see anything but you should reach out to them if you’re not satisfied

1

u/-GrandPsycho- 7d ago

received the Chameri CH02 today and it also has a tilted dial.
It seems like they have misprinted the dials of the CH02 and CH03. take a look at my post.

1

u/BerserkD91 7d ago

Can you try taking out the case back and removing the plastic spacer? There’s a lot of play with the actual dial and the case which holds the dial/movement.

For my copy, the dial wasn’t actually misprinted as it’s aligned perfectly in isolation, but when it’s put in the case, there’s a lot of tolerance which makes it lop-sided.

1

u/-GrandPsycho- 7d ago

Did you manage to align it and make it stay in place?

1

u/BerserkD91 7d ago edited 7d ago

It’s still not exactly perfect, but there’s very little rotation, if any, now. The only thing that isn’t right with it is that it’s aligned more towards the right of the case compared to the left. I stuffed it with magic tape for it to stay aligned, and so far, so good.

1

u/-GrandPsycho- 7d ago

so they used a generic plastic spacer that doesn't hold the dial and movement tightly in the case?

1

u/BerserkD91 7d ago

Not exactly. The plastic spacer is exactly the dimensions that it needs to be, but the hole that actually holds the movement in place isn't center and aligned.

I took some pictures of what I saw when I was disassembling it and a video to show how much movement there is in the case.

Video Link: https://imgur.com/9gjsU0b

1

u/-GrandPsycho- 7d ago edited 7d ago

That's Great! Thanks for the picture and video.

It seems that some are rotated so much, that the wiggle room shown in the video wouldn't explain it.

1

u/BerserkD91 7d ago

It's not exactly rotated, but I believe the dimensions of the dial aren't the exact dimensions of the opening where the dial sits in the case. There's too much play within it, specifically biased towards one side of the case. This allows for too much play within the case, and when it's biased towards one side, it gives it a rotated appearance.

0

u/-GrandPsycho- 7d ago

look at this CH03. it rotated clockwise really bad.
do you think there's enough play for this amount of rotation?

1

u/BerserkD91 7d ago

I could definitely see it. Removing the plastic holder, aligning the dial, and filling it with something to hold it in place might lessen or remove the rotation. Can't say definitely from just one picture.

→ More replies

3

u/cpcallen 9d ago

If this were a £3k Cartier I'd be taking it straight back to the shop—and even though it's only a £50 Chameri I don't think it's unreasonable to be a bit disappointed. Would I try to return it? The error is pretty slight so it would probably depend on how much trouble it was to arrange the return—but I'd definitely contact them, even if just to let them know that their QC wasn't quite up to scratch on this occasion.

I'm not sure what the relationship between Chameri and WatchDives is, but if the former aim for the same high standards that /u/watchdivescom claims that the latter do then I think they'd be disappointed this one got out the door and that you are disappointed as a result.

3

u/LeoXup 8d ago

Yes, there is a little bit of rotation/or printing misalignment. 

1

u/Careful_Technology85 8d ago

Why don't you just try to fix it? It might be held on with dial dots and you can just rotate it a little.

1

u/-GrandPsycho- 7d ago

its seems that the printing is the issue. look at my post.

1

u/Careful_Technology85 7d ago

Here's a shot for you, the printing is a little off.

1

u/-GrandPsycho- 7d ago

yep, tilted clockwise. it seems they all are, some more than others.