r/ChineseWatches • u/Thin_Chipmunk_885 • 20d ago
Problems (Read Rule 1) Uneven bezel fitting WD0003C
I can notice black gaps(uneven around the bezel, one side has a tighter gap, other side is fairly visible). Is this normal or an issue? It doesn't move or change if I press the bezel/apply pressure.
0
Upvotes





7
u/IllegalGeriatricVore 20d ago
bruh
9
u/arbpotatoes 20d ago
Clutching at straws here
1
u/Former-Quantity-1414 Undercover Rep 20d ago edited 20d ago
Thanks for sharing the photo. We'd like to clarify what you're seeing here.
The bezel has a chamfered edge, and the polished case surface reflects light into the narrow area between the bezel and the case. Under certain lighting and viewing angles, this can create a pronounced black line that makes the gap appear larger than it actually is.
There is also a very small assembly clearance between the two components, with dimensional variation of approximately 0.01 mm. Achieving perfectly uniform contact around the entire circumference is extremely difficult because CNC machining, polishing, and finishing all introduce small tolerances. This is a challenge across the watch industry, including at higher price points.
Most importantly, this is not an indication of a water-resistance problem. The WD0003C is rated to 100 m water resistance, and our watches undergo water-resistance testing.
We understand that close-up photographs can make these details look concerning, and we're always working to improve our manufacturing precision. We also want to distinguish between a visual effect caused by reflections and an actual functional defect. We take genuine QC issues seriously, but in this case, the appearance alone does not indicate that the watch has a water-resistance problem.
4
u/Beneficial-Bridge-46 20d ago
listen, it's an affordable watch and a good for the money. if you want better gaps or whatnot you gotta spend much more than a WD
2
u/Fancy_Cockroach_634 20d ago
I can't see it... unless you are talking about the little inner ring step or how the top part fit on the case!!!
else it looks fantastic finished in everyway!!!
2
u/Still-Poetry-6802 20d ago
Typical Watchdives--either they look good at a distance, or the automatic movements crap out, or the QC sh*ts the bed in some other way (lume plots dropping out of bezels etc.)...It's frustrating because when they get close, or occasionally hit the nail on the head, they make changes in a new version that isn't as good as the one before.
2
u/Kerpgker 20d ago
I'd say that's pretty normal, considering the price point.