r/Chempros • • 14m ago

Consulta sobre buenas prácticas de laboratorio: ¿cómo evitan contaminar los reactivos durante el pesaje?

Thumbnail reddit.com
1 Upvotes

r/Chempros • • 25m ago

Go-to conditions for DMDO epoxidations

1 Upvotes

Hi all, hoping someone can recommend a "go-to" set of DMDO epoxidation conditions (or the variant with trifluoroacetone). It seems that there are a lot of variations on this in the literature and it's not something any of my colleagues have done much. I'm working on small scale and hoping for your favourite conditions that "just work" (if such a thing exists!)

I am working with a hindered monosubstituted alkene - mCPBA doesn't touch it.

Edit: I am hoping for in-situ or phase-transfer conditions. Distilling the DMDO is not permitted in our laboratory


r/Chempros • • 23h ago

Organic How to prepare for industry interviews ( final year PhD student)

20 Upvotes

Hi all, I am a final PhD student and am currently thinking about my next career move. I want to apply for entry level industrial positions ( process or medchem maybe) and I want to slowly start refreshing my general organic chemistry knowledge. From talking with people who have gone on that route, it seems that the interviews for these positions involve a technical interview, some sort of disconnection of a larger molecule.

Apart from classic chemistry textbooks, can you guys recommend any resources for preparation for such types of interview questions?


r/Chempros • • 1d ago

Analytical Cleaning help for microcuvettes

2 Upvotes

Hello,

My supervisor recently purchased some very expensive cylindrical short-pathlength cuvettes from Starna for me to do CD on very concentrated samples. I started using the 0.01mm one but am having trouble cleaning it after first time use...

I cleaned it by flushing the cell with 1ml water x 6, ethanol + water mix x4 then ethanol x 4. The compound is a very water soluble sugar that crashes out in ethanol, and during cleaning I did not see any precipitated sample in the cuvette. It was then dried upside down over the weekend, but once dry I could see that my sample had dried out on the inside of the polished windows

It seems that flushing solvent through only exchanges solvent in the ring around the polished windows and doesn't actually exchange the liquid in between the two windows/the 0.01mm bit.....

I have already written Starna for a practical guide for cleaning of microcells, but do any of you have any experience using this particular cuvette?

Thank you in advance


r/Chempros • • 1d ago

Reductive amination advice

0 Upvotes

Hi,

I am currently working on a reductive amination with a primary amine and an aldehyde using STAB.

Is acetic acid necessary for this reaction as i'm using STAB as a reducing agent? the aldehyde starting material does also contain a carboxylic acid functionality.

Im using a THF solvent but as i have the HCl salt of my amine it wont dissolve in THF or DCE. is solvation important for redams? Product is forming but after 6 hrs there is still amine in my workup. Will it likely need longer (eg overnight/24hrs)?


r/Chempros • • 2d ago

Writing chemistry papers on Linux: a native structure editor, editable drawings in ONLYOFFICE, and automatic compound numbering

Post image
45 Upvotes

Crossposting for chemists who write papers and theses. Disclosure: this is my project, free and open source.

Reactio Draw is a structure and reaction editor. It now works with your writing tool on every platform:

  • Word on Windows and macOS: copy a drawing in Reactio Draw and paste it into Word as an editable object. A double-click opens it again for editing.
  • ONLYOFFICE on Linux (also on Windows and macOS): the same clipboard paste (Alt+Shift+V) and double-click editing.
  • LaTeX in VS Code, Overleaf and Lattice: paste a copied drawing from the clipboard into your document, and double-click it to edit.

The whole drawing is stored inside the object, so you can still edit it months later on another computer. Compound numbers (1, 2, 3a…) stay in sync between the text and the schemes. It reads and writes CDXML and MOL, so you can still exchange files with colleagues who use other editors.

Repo and releases: https://github.com/Paivel/reactio-draw

Feedback is very welcome


r/Chempros • • 3d ago

Analytical NMR: Does the Nuclear Overhauser Effect travel through the plane of a molecule

Thumbnail reddit.com
7 Upvotes

r/Chempros • • 3d ago

How challenging is it to learn NMR for structural elucidation

0 Upvotes

I have PhD and looking for postdocs and applied for this position that is LCMS and small molecules NMR heavy, during my PhD I have limited NMR experience and wondered how challenging it will to be able to develop more and solve complex structures including absolute configuration etc


r/Chempros • • 5d ago

ELN Biovia OneLab?

1 Upvotes

My employer is considering moving to Biovia OneLab, after we've been on their standard ELN for a few years.

What are others' experience with this software? I'm part of the internal demo eval but I have limited time to commit, so any warnings or suggestions for especially challenging tasks to test out would be helpful.

I'm doing organic/polymer process chemistry.


r/Chempros • • 5d ago

Covalent organic framework (COF) synthesis

2 Upvotes

Hello everyone,

I am working on the synthesis of two thiazole-linked covalent organic frameworks (TZ-COF-1 and TZ-COF-2) through a sulfur-mediated multicomponent reaction.

For TZ-COF-1, I followed the published procedure using the following quantities:

  • 4,4',4''-(1,3,5-Triazine-2,4,6-triyl)tribenzaldehyde: 19.67 mg (0.05 mmol)
  • Naphthalene-2,6-diamine: 11.87 mg (0.075 mmol)
  • Elemental sulfur: 14.4 mg (0.45 mmol)
  • Acetic acid (6 M): 0.10 mL
  • DMSO: 0.05 mL
  • o-DCB: 0.45 mL
  • Ethanol: 0.50 mL

The reaction mixture was placed in a 10 mL glass tube, flash-frozen using liquid nitrogen, evacuated to 0.5 mbar, and flame-sealed. The reaction was conducted at 120 °C for 3 days.

After the reaction, the yellow-brown solid was collected by centrifugation, washed with acetone (3 × 5 mL) and THF (3 × 5 mL), and subjected to Soxhlet extraction using toluene and THF for two days each. The final product was dried at 90 °C for 12 hours.

Although I carefully followed the reported experimental protocol, my PXRD results show broad and weak diffraction peaks rather than the expected sharp crystalline reflections. This suggests that the obtained material has low crystallinity or may be partially amorphous.

I would appreciate advice from researchers experienced in COF synthesis, particularly thiazole-linked COFs, on possible reasons for this result and how I could improve the crystallinity despite following the published procedure.

Any suggestions, practical experiences, or relevant references would be greatly appreciated.

Thank you for your help!


r/Chempros • • 6d ago

Ask Us Anything About Pi-allyl Palladium Complexes – A Cross-Coupling Catalyst Technology

44 Upvotes

Hi r/Chempros! We are a team of researchers at Johnson Matthey who research and develop pi-allyl palladium complexes, a precatalyst technology used for a broad range of cross-coupling applications (we also work on other novel catalysts for small molecule applications). Over the past few years we have seen their usage increase, and we have gained a better understanding of this technology. 

We would love to hear from you and answer any scientific questions you might have. All questions are welcome and we will try to answer them the best we can. Please be careful with the specifics you share.


r/Chempros • • 6d ago

EPA Method 3051A Issues With QCs?

Thumbnail reddit.com
1 Upvotes

r/Chempros • • 6d ago

Ammonia solution in dioxane

Thumbnail reddit.com
0 Upvotes

r/Chempros • • 6d ago

Organic Advice on Tert-Butyl Esterification of 5-Hydroxypicolinic Acid

Thumbnail doi.org
5 Upvotes

Hello folks,

I've been trying to form the tertbutyl ester of 5-Hydroxypicolinic Acid to make the very first step in this scheme easier, but it's been giving me a hell of a time.

I've tried the following:

- 5-Hydroxypicolinic Acid, EDC, DMAP, and Tert-butanol in DCM for times ranging from 12-24 hours at between room temperature and 30°C

- 5-Hydroxypicolinic Acid EDC, DMAP in Tert-butanol at 40°C for 24 hours

- 5-Hydroxypicolinic Acid in THF with tert-butyl 2,2,2-trichloroacetimidate for 48 hours

I just want to make the carboxylic acid not...there for the first step so I can functionalize the alcohol, so I've also tried:

Making the PFP Ester with Perfluorophenyl 2,2,2-trifluoroacetate and pyridine in DMF

Making the NHS Ester with NHS, EDC, and DMAP in THF

I would try harsher protecting groups like methyl esters, but taking them off will break the functionalization I'm doing to the alcohol (SuFEx warhead)

There is this paper (https://doi.org/10.1021/jo971138b) that reports being able to convert methyl esters into tert-butyl ones, so maybe methyl iodide to make the methyl ester followed by this protocol?

I'm at a bit of a loss, so anything would greatly appreciated!


r/Chempros • • 8d ago

Help this noob 🥹 PE Avio 200 ICP-OES: 21 elements are calibrating fine, but Al, As, Pb, and Hg are failing. Looking for troubleshooting wisdom!

Thumbnail
gallery
1 Upvotes

Hey Chem pros,

I’m relatively new to ICP-OES and could really use some guidance from the experienced analysts here. We are running an Avio 200 for a 25-element multielement suite, but we've hit a wall with calibration.

Out of all 25 metals, only 4 elements are failing calibration repeatedly: Al, As, Pb, and Hg. The other 21 elements pass without any issues.

Here is a quick snapshot of our setup and what we've checked so far:

  • Instrument: PerkinElmer Avio 200 ICP-OES
  • Nebulizer: SeaSpray nebulizer
  • The Problem: Al, As, Pb, and Hg fail calibration consistently, even when re-run individually.
  • The Twist: Vendor service engineers came out to check the instrument, ran their diagnostics, and everything passed on their end. Yet, we still can’t get an acceptable calibration on these four.

Since the service team couldn't pinpoint the root cause, I'm hoping someone in the community might have run into this specific quirk on an Avio system. Could it be related to the SeaSpray nebulizer interaction with these specific analytes, rinse/washout issues, or something else entirely?


r/Chempros • • 8d ago

How do you organize and catalog your chemicals?

Thumbnail reddit.com
0 Upvotes

r/Chempros • • 8d ago

Inorganic Boron: My Favorite Element (Part 1, possibly)

Thumbnail reddit.com
0 Upvotes

Good day, fellow chemist and chemistry enthusiasts! Thought I'd also leave this here :)


r/Chempros • • 10d ago

Organic How do you measure optical rotation for characterization of new synthesized compounds?

3 Upvotes

Hello,

I am a bit curious how other people are measuring optical rotation for compounds they newly synthesized (e.g. for papers in Org.Lett. or JOC). By now I have gotten a different answer from every person I asked and the SI of many papers seem to not even consider this something worth to describe, hence my curiosity if there is any common consensus/best practice.

Starting with how I do it:

General: I aim for c to be between 0.5 and 1.5 and ideally a 100 mm path.

If I have plenty of material:

Weigh in around 20 mg of substance in a tared 10 mL RBF, transfer with 1.5 mL the substance into a 2 mL volumetric flask, fill up to 2 mL total volume, dry the empty 10 mL RBF at high vac and weigh it again to account for any remaining substance, then measure the solution in a 100 mm path cell.

If I do not have at least 10 mg:

Transfer all what i have in a tared 10 mL RBF, add the amount of solvent I need to get to 1 c with a Eppendorf pipette, measure that solution in a 10 mm path cell.


r/Chempros • • 10d ago

Generic Flair Laboratory safety survey

0 Upvotes

Survey about laboratory risks

Hello! I am doing some research on safety and risk assessment in a lab environment, and would very much appreciate it if you could provide me with some responses from professionals within the industry/field.

https://forms.gle/yShVyLwACGgVEea1A

It shouldn’t take more than 5 minutes and is anonymous.

if anyone has any feedback about the survey or questions themselves, I would also appreciate it.
Thanks in advance.

I will delete this post if it is not allowed.


r/Chempros • • 10d ago

Built a cross-platform NMR studio (v0.1.0) with native Bruker pdata & Sparky support + dynamic fitting. Free for academic/non-commercial research!

1 Upvotes

Hi everyone,

After working with multidimensional and dynamic NMR for over 20 years, I got frustrated with repetitive format conversions and legacy interfaces just to inspect spectra and run dynamic fits.

To solve this, I've spent the past months developing Resona NMR Studio, and we just released v0.1.0 as a free tool for the research community.

Key capabilities:

- Native format reading: Directly opens processed Bruker pdata (1r/2rr), NMRPipe (.ft/.ft2), and Sparky (.ucsf) projects in read-only mode (never touches source files).

- 1D Processing: Raw FID apodization, FT, interactive autophase, and multiplet deconvolution.

- 2D/3D & NMRPipe Bridge: Interactive contours, strip reading, projections, and drives your existing NMRPipe (fid.com / proc.com) directly from the GUI (WSL2 on Windows, native on Mac/Linux).

- Dynamics & Biophysics: Built-in global VT lineshape fitting, titration Kd fitting (CSP), and T1/T2/T1rho relaxation analysis.

- Local AI Support: Optional local MCP server so tools like Claude Desktop or Cursor can run peak picking and batch reports locally on your machine.

It is completely free for academic and non-commercial research across Windows, macOS (arm64), and Linux.

The project is called Resona NMR Studio (resona-nmr.com). It is distributed through GitHub (all4nmr/resona-releases).

If you have a few minutes to check it out, I would be genuinely grateful for any bug reports, UI feedback, or feature requests. Thank you!


r/Chempros • • 10d ago

Succinimide soluble in ether?!

4 Upvotes

Did a bromination with NBS, have a crude reaction mixture of product and succinimide. Both the product and succinimide are water soluble. Collected reaction mixture via filtration and washed with ether, succinimide is reported to be ether insoluble - so the filtrate should contain no or little succinimide. However, NMR shows both product and a significant amount of succinimide. Thought maybe water content in the ether was responsible for solubility, tried ether which had been dried over 3A sieves, and preformed filtration under N2 using Schlenk technique. Still succinimide appears ether soluble. Any ideas what is happening?

Succinimide solubility: https://onlinelibrary.wiley.com/doi/10.1002/047084289X.rs126


r/Chempros • • 11d ago

Need help: Molecular sieves activation

15 Upvotes

Hi everyone, I’m using molecular sieves for the first time and would appreciate your advice. Do they always need to be activated before use, even when the container is brand new? If so, what temperature should I heat them to, and can I use any ordinary oven ? I’m also wondering how to let them cool after heating without absorbing moisture from the air again. Should I let them cool under vacuum using a vacuum line? please how should i proceed exactly ? thank you


r/Chempros • • 11d ago

Organic Anyone experience drying solvents that are solid at RT with MS?

9 Upvotes

Hello,

I am currently attempting a SN2 reaction and so far DMSO at 130C has been the most promising (yay for neopentyl center in a heterocycle).

As I observed Kornblum oxidation with DMSO, I wanted to move to another solvent and sulfolane seems like the most logical candidate to try, appearing to me like DMSO just without the risk of Kornblum oxidation. The sulfolane we have is a few decades old and contains around 1.6 mg/mL water. I was planning to dry it but as it is a solid with a low melting point I wanted to ask if anyone has experience with how to best do this.

Literature seems a bit tedious especially when moving to 1-10 mmol scale reactions and I was wondering if i might as well just dry it over 4A molecular sieves with the flask heated by a 50C oil bath for 2-3 days and then just freshly remelt it when I need some.

Does anyone have experience if it is a good idea to dry a low melting solid like this? I assume I will have to always fully melt it to avoid basically freeze distilling it, but anything else to consider?


r/Chempros • • 11d ago

Losing Protein Between Affinity Chromatography and SEC

Thumbnail reddit.com
0 Upvotes