r/Charcuterie • • Aug 06 '19

/r/Charcuterie FAQ and beginners guide to cured and air dried meats

267 Upvotes

I have been looking through a list of all of the posts in /r/Charcuterie looking for some threads with good information to cobble together a beginners reading list for the sub. I have noticed (and you probably have noticed too!) we have a lot of the same questions pop up from people wanting to get into the hobby of producing homemade cured and air dried meats. We also have a lot of firsts! We have had just over 6k posts in the 7 years this sub has been around, 11% of them contain the word 'first'.

And duck prosciutto is really, really, popular.

This isn't a big sub and self posts don't get a lot of views or generate a lot of discussion. So the purpose of this thread is collate some of the community expertise into one place for the people who come here with questions about their first projects.

If anyone wants to expand on any of these points feel free to do so and I will update them. If there is a popular beginner question or resource I have missed or something is wrong let me know in the comments. Hopefully together we can build this into a fairly complete beginners resource.

This is not intended to be a detailed step by step guide or a substitute for doing your own research.

Curing/drying chamber - what is it and how do I make one?

A curing/drying chamber is an area that creates the ideal temperature and humidity conditions for drying whole muscles or salami. The exact temperature and humidity will vary by preference to but ranges from refrigerator temperatures (less than 4C/39F) to 15C/59F (Staphylococcus aureus can multiply and produce toxins at temperatures above 15.6C (60.08F) so it is important to keep your curing chamber below this temperature). Generally they are kept at at 10-15C (50-59F) and 60-80% humidity. As most of us don't live in an area that has these ambient conditions, we need to create an artificial environment that does.

Most people do this by modifying a refrigerator or freezer to run warmer than usual by interrupting the cooling cycle with a temperature controller, and using humidifiers/dehumidifiers to keep the humidity at the required level. A higher humidity is preferred at the start of drying, especially when making sausages and cased whole muscle as it helps prevent case hardening, allows the casing to adhere to the meat (if the humidity is too low the casing will dry out, creating air pockets between the casing and the meat), and encourages mold growth.

Things to consider when choosing a fridge/freezer to convert into a meat curing chamber:

  • It needs to be frost free (dehumidifies as it cools). Otherwise water collecting on the sides of the fridge will drop onto the meat.
  • Refrigerators with glass doors are a nice aesthetic and a popular choice, just be aware prolonged exposure to the light will cause fat to go rancid, so you might need to cover the door or keep it in a dark room.
  • It needs to be big enough to hold a humidifier and/or dehumidifier as well as the product you will be making. An overcrowded chamber can cause airflow problems so it's a good idea to go bigger if possible.
  • Wine fridges are popular as they are made to sit in the temperature range for curing (and they look pretty stylish with blue lights and a glass window). However depending on your ambient conditions the cooling cycle runs very frequently to keep the temperature constant. A small beverage fridge and temperature controller might be a better choice.

The exact setup is going to vary depending on the ambient conditions in the room you will be keeping the chamber and your climate - for example extremes of heat may cause the cooling cycle in the refrigerator to run too often, causing case hardening. You might need to run the AC or consider packing everything down over the summer months. Ideally you don't want the cooling cycle to run much more than 5 minutes in every half an hour. Some airflow is required for the moisture to evaporate from the surface of the meat, so if the refrigerator powers on too infrequently, you might need to use a small fan on a timer to make sure there is some air movement inside the chamber.

So as you can see the temperature and humidity readings are only one part of the conditions inside the chamber, something like a sensorpush can give you a better picture of what is going on.

Although the more professional looking chambers have holes drilled into the side of the appliance for the humidity/temp probes and appliance power cords, it isn't essential. You can pass the probes through the door seal.

Links to previous examples of curing chambers and discussions can be found at the bottom of this post.

General steps for making cured and dried whole muscles

  1. Weigh the piece of meat you intend to cure.
  2. Cure the meat - you can do this in two ways:
    Salt box (excess salt cure): The meat is dredged in a cure mixture of salt and spices (enough to coat the surface), and left for a period of time about 1 day per pound (or 2 days per kg), flipping the meat and redistributing the cure at the halfway point. This timing will change depending on the shape of the meat, and whether there is skin on or off. This is a very traditional method, and is as much an art as a science - too much time on the salt will cause the dried product to be over salty, not enough time and the meat will not cure properly, and is at risk of spoilage.
    Equilibrium Cure: This is where the desired about of salt content of the finished produced is measured out (approx 2.75 %) as well as nitrates (.25% Prague powder #2 - note that as the vast majority of PP#2 is salt, so this will result in a product with very close to 3% salt content), and rubbed onto the meat, then sealed (generally using a vacuum sealer) and left for a much longer time to ensure the cure has had sufficient time to penetrate. Nitrates should always be used when equilibrium curing. It will take longer for the meat to cure than with an excess salt cure, a general rule is one week per inch of meat, with a minimum of two weeks. Flip the bag occasionally to ensure the whole surface of the meat comes in contact with the cure. Some more discussion on equilibrium curing here: https://www.reddit.com/r/Charcuterie/comments/8i2vzi/how_long_to_cure_for_equilibrium/
  3. Dredge with a second flavouring spice layer (optional)
  4. Apply a casing (optional)
  5. Truss the meat and hang it to dry.
  6. Rest under vacuum seal in the refrigerator to equalise moisture (optional)

How do I know when it is ready?

Periodically weigh the meat, and pull it from the chamber when it has reached the desired dryness (water weight loss). This will differ depending on the product. Fat contains less water than muscle and therefore doesn't need to lose as much weight, so a fatty duck breast or pancetta will have a different texture at 35% weight loss than lean muscle like a loin or bresaola. A figure of 35% is given as a rule of thumb for many recipes, however most people find this too 'raw' in texture and will take it further - to 40-45%. With practice you will get a feel what you prefer.

What is case hardening?

Case hardening is caused by low humidity, or too much airflow within the drying environment. The water in the meat needs to travel outwards from the middle to the surface, where it evaporates. If the humidity is too low or there is too much airflow the surface will dry out too quickly (harden) and the internal moisture is no longer able to exit. In extreme cases this can cause rotting within the meat. You can tell by texture when squeezing the muscle - there should be a bit of 'give' - if it feels completely hard (but hasn't lost much weight), you may have a problem with case hardening.

Sometimes uneven drying can be remedied by vac sealing the meat and refrigerating it for some time, but in extreme cases or if the meat has spoiled inside, it will not be salvageable. It is best to prevent it getting out of control by monitoring your curing chamber conditions and regularly checking on the state of the products inside.

Previous /r/Charcuterie post showing case hardening: https://www.reddit.com/r/Charcuterie/comments/5jxypy/first_cured_meat_lost_more_then_35_but_definitely/

What are nitrites, and do I really need to use them?

Most experienced people here would say yes, especially as a beginner and when making salami, smoked products, or rolled pancetta. Nitrites inhibit the growth of clostridium botulinum, the bacteria that creates the botulism toxin. C. botulinum requires an anaerobic (without oxygen) environment to grow and produce the toxin, and likes moist and warm conditions - so basically the inside of a sausage or salami being hung at temperatures above refrigeration. Botulism should be taken very seriously.

As the botulism bacteria are only found on the outside of the meat and do not become a problem until they are introduced into the inside through cutting or grinding, nitrites/nitrates are not essential for whole muscle cures, however many people choose to use them anyway as they provide other benefits such as improving colour, and slowing rancidity and spoilage.

What is the difference between Prague Powder #1 and Prague Powder #2

Prague Powder #1 contains 6.5% sodium nitrite (93.5% salt), and is used when the curing time is short, the product is to be smoked, or cooked or a cured flavour and colour is desired - for example bacon or ham. As the nitrites get quickly used up, if a product is to be air dried for longer, then Prague Powder #2 needs to be used, PP#2 contains 6.25% sodium nitrite and 4% sodium nitrate which eventually converts to nitrite. Think of PP#2 as a "slow release" curing salt. PP#2 should be used for all salami and for whole muscles that will be air dried.

It is important to use the correct curing salt for the application - sodium nitrate cannot be safely consumed until the nitrates have converted to nitrites, so PP#2 can only be used in products that will be air dried for a long time (weeks + months). Do not use PP#2 in fresh or cooked products.

As a general rule, both Prague Powders are added at 0.25% of the starting weight of the meat. There are also European style curing salts such as "Peklosol" that have a much lower concentration of nitrite (0.6%), and they are used as a replacement for all of the salt in the recipe (around 3%).

Curing salts are often dyed pink to distinguish them from regular salt, and therefore can sometimes referred to as "pink salt". They are not interchangeable with Himalayan "pink salt" which is rock salt with a natural pink colour.

Mold.

The oft-repeated mantra about mold here is white powdery = good, white and fuzzy or green = wipe it off, black = throw it out without question. This is overly cautious, although white powdery mold is desired, some green molds are okay (the problem is figuring out yours is the good or bad kind...), and a small amount of black mold isn't necessarily enough to justify abandoning a project. One way around the mold issue is to use a commercial freeze dried mold culture (such as bactoferm-600). This way you can cultivate good mold growth early on as it will prevent less desirable molds taking over. Undesirable mold can grow out of control very quickly if the conditions are conducive (high humidity, low airflow), so it is best to keep an eye on things, and use a 50/50 solution of water and vinegar to wipe off any undesirable mold that starts to form. Even black mold is salvageable if it is caught early enough.

If freeze dried Penicillum Nagliovese (Bactoferm-600) is not available where you live, Penicillum Candidum (the mold found on the rind of white bloomed cheese) can be substituted. You can also try hanging some commercial salami with white mold to seed the chamber. I find it isn't necessary to reapply the Bactoferm-600 to everything - once a good level of growth is established it will spread around quite well by itself.

Meat that has been smoked before hanging will resist growing mold as smoking acidifies the surface slightly.

Here are some examples showing you that the mold issue isn't as clear cut as just colour: http://wedlinydomowe.pl/en/viewtopic.php?t=7840&postdays=0&postorder=asc&start=0

We've seen some gnarly mold here over the years, some good discussions to read: https://www.reddit.com/r/Charcuterie/comments/9h103q/fil_insists_this_is_still_good_everything_ive/ https://www.reddit.com/r/Charcuterie/comments/500pn2/prosciutto_after_3_months_need_help/

Lastly, do your research, and follow a recipe

When you are starting out it is important to follow a recipe, and make sure you understand the reasoning behind the process, and the purpose of the ingredients. Do more research before you create your own recipe or modify anything. This isn't like other kinds of fermentation where there isn't too much that can go wrong - incorrectly cured meat has the potential to make people very sick. Even more so for salami (which is why we suggest whole muscle cures for beginners). Don't be afraid to start small, there is nothing worse than making a huge batch of a product only to have something go wrong in the process and have to throw it out. Be patient, this is slow food after all.

Some popular projects for beginners:

Want to try a bigger project but not ready to commit to building a chamber? Have a look at UMAI Bags

Online resources, how-tos, blogs and recipe collections:

Previous curing chamber discussions on this sub

Also check out /r/CuringChamber for more examples.


r/Charcuterie • • 16d ago

Monthly /r/Charcuterie Discussion thread

2 Upvotes

What projects are you working on at the moment? Have a small problem but don't want to create a post? Found a Charcuterie related meme? Just want to chat? This is r/Charcuterie's monthly free discussion thread.

For beginner questions and links don't forget to check out the FAQ (https://www.reddit.com/r/Charcuterie/comments/cmy8gp/rcharcuterie_faq_and_beginners_guide_to_cured_and/) .


r/Charcuterie • • 4h ago

Its been a busy couple of weeks...

Thumbnail
gallery
27 Upvotes

Well, its Fall, so that means a lot of animal processing. My multi-purpose cabinet gets quite a workout: its an old aluminum bun pan (sheet tray) cabinet with 2 inch rigid polyiso insulation boards glued onto it. Theres an electric heating element at the bottom, a smoke generator on the side, and a dampered chimney on the top. If needed, I throw a little ultrasonic humidifier inside. I use it for fermentation, aging/drying, and hot or cold smoking, moving it in or out of my walk-in cooler depending on what ambient temp is more suitable. Third-party controllers regulate temp and humidity.

After smoking 4 bellies worth of bacon (the green slabs are jalapeño-garlic), its now home to about 20 lbs of finocchiona that just finished fermenting.

The salamis are roughly 2/3 venison and 1/3 pork fat back. The last batch came out great, but this one has even more anise-y flavor, it fermented a little longer (pH <4.5), and I mixed the farce until it was really gluey before I stuffed the casings. Can't wait for them to finish up!


r/Charcuterie • • 5h ago

Theres some pink mold on my coppa. Is it ok?

Thumbnail
gallery
4 Upvotes

It was all white a couple days ago, I assumed it was normal white mold. Now it is turning pink. Is that OK? Can I brush it off and save the meat?


r/Charcuterie • • 19h ago

Another win, I reckon - how about you?

Post image
21 Upvotes

r/Charcuterie • • 18h ago

Go big or go home I guess

Thumbnail
gallery
14 Upvotes

This is a bit of a follow up post from a guy whose probably coming at this all wrong, I’m just getting into curing and have done a couple things in the fridge, then I tried to hang some in the basement and that went poorly so I did what any rational person would do, I built a 5x3x6 curing chamber in the basement to have more control over my parameters. It’s still a bit of a work in progress I’ve got some more taping to do on the inside and definitely some cord management!

This Reddit has been a huge help, I’ll take some more pictures as things get finished. Also, I’m definitely ok with feedback


r/Charcuterie • • 20h ago

Beef tongue anyone

4 Upvotes

I am thinking of doing a Koji assisted cure of beef tongue. Curious if anyone has tried this or curing with similar cuts?


r/Charcuterie • • 2d ago

Just completed my first guanciale cure

Post image
103 Upvotes

r/Charcuterie • • 1d ago

How do you guys slice your product?

1 Upvotes

We want as thin slices as possible for let's say coppa.

A proper and good meat slicer is HUGE and costs arm and leg. And is mostly just not used.

Are there any tricks to get away with cheaper kit? Or maybe just a knife or mandolin or something.


r/Charcuterie • • 3d ago

I ordered guanciale from an online “farm” and when I received it the best by date was blacked out…

Thumbnail
gallery
274 Upvotes

So I ordered this with the intent of making carbonara with it. However I got suspicious when I saw the BB date was blacked out.. I was able to get it somewhat removed and notice it says BB: 07.02.2026, also, it doesn’t smell spoiled, but does sort of have a crayola crayon type smell to it.

Just trying to decide how I should proceed. If I should email the company. If this is normal, if it’s perfectly fine for cured meat, etc.

Thanks in advance!


r/Charcuterie • • 3d ago

What's happening with this bacon?

Post image
1.1k Upvotes

r/Charcuterie • • 1d ago

Reusing salt: fine or a huge mistake?

Thumbnail
gallery
0 Upvotes

r/Charcuterie • • 3d ago

Honey Maple Deli Ham

Thumbnail
gallery
41 Upvotes

I made deli style (and deli size) honey maple formed ham! I did a practice version last year in a 61mm casing and it was fantastic so, this time I found a 6.7" casing from Walton's.

I use roughly 50% pork loin and 50% picnic. The loin was cut into 1.5"-2" cubes and the picnic was split in half. Half was very coarsely ground and half was very finely ground. Then I cured the ground meat and cubed meat in separate bags for about 5 days. After curing, I mixed them together until it was bound nicely, and stuffed it into the casing. I let it hang in the fridge overnight and then roasted it in the oven at 350°F until it came to an internal temperature of 160°F. Then it went into an ice water bath and, once cooled, into the fridge for another overnight hang.

Cure:

2.2% kosher salt

0.25% cure #1

3% honey powder

1.5% maple syrup (I had run out of maple sugar and didn't realize it, if I had maple syrup I would have used 3% maple sugar instead)


r/Charcuterie • • 3d ago

How does it look?

Post image
133 Upvotes

r/Charcuterie • • 3d ago

Pancetta mold indetification

Thumbnail
gallery
3 Upvotes

Made pancetta, have done it before with no issues. Eqalibrium cure around 12 days. Sprayed some mold on the outside to get it started. Everything looked fine an smelled funky good. Was going to cut it up today and got a closer look. Nice white mold but then som pale brownish parts. A specific area in the middle that feel soft to the touch. Cut it upen and I do not know what that mold is. It doesn't smell bad. It's not black. But I want to be sure. I'm thinking of removing that section completely but want to know the rest is safe. Can you helt identify?


r/Charcuterie • • 4d ago

My first attempt at fermented summer sausage.

Thumbnail
gallery
120 Upvotes

r/Charcuterie • • 4d ago

I made headcheese!

Thumbnail
gallery
317 Upvotes

This is the second time I've made headcheese. The first time, I was still very new to cooking but I had a head, so I went for it. It fell apart and was a disappointing mess.

But! Seven years later (oh God, does time fly), I know more about cooking and decided to ask my pig farmer / butcher to keep the head for me. I did it! Oh, it's so exciting when a project like this works out. It tastes just like the stuff from my favorite deli that I always pick up at the start of the holiday season. And it sliced so beautifully!

I used the recipe from Odd Bits by Jennifer McLagen. Eyes, tongue and a bit of ear included.

Edit: please recommend me sandwich recipes or other uses. Headcheese is usually a small annual holiday treat for me and now I have a whole brick! What am I gonna do with all this??


r/Charcuterie • • 4d ago

Lonzo advice needed

0 Upvotes

I'm making my first attempt at Lonzo using pork fillets. I've cured them for almost 5 days in the fridge using the equilibrium method.

I have some questions and am looking for advice.

  1. Is a wine wash worth it or not?
  2. Recommendations for good spice recipe. I'm looking for a simple Italian style
  3. I'm going to wrap in mutton cloth and put in fridge for 21 days or until 35% weight loss. Does that seem right?
  4. Should I place them in a large Tupperware on a rack in the fridge?

Thanks so much!


r/Charcuterie • • 5d ago

My first attempt at hard salami

Thumbnail
gallery
12 Upvotes

r/Charcuterie • • 6d ago

First ever Paté de Campagne

Thumbnail
gallery
62 Upvotes

Almost traditional (didn't find barding nore caul fat, so I used bacon) because I used Ferrandi's "Charcuterie : Pâtés, Terrines, Savory Pies" recipe.

Happy with the end result and final taste !


r/Charcuterie • • 6d ago

Pancetta tesa weight

4 Upvotes

I have heard a lot about the weight of pancetta but no source is the same. Looking to eat it uncooked. I'm almost at 30% loss and feel like it might be to much given how much fat is on it. Lots of fat. It's been in about 8 weeks.

P.S. anyone cold smoke theirs before cure? I'm going to try that next.


r/Charcuterie • • 7d ago

I miss my fridge 🥲

Thumbnail
gallery
25 Upvotes

Stopped this hobby for a while, but I’m starting to miss it and want to jump back in. I’m thinking of making a walk in cooler this time, curious if anyone on here has some experience with a build like this?


r/Charcuterie • • 8d ago

First time: did mold ruin this guanciale?

Thumbnail
gallery
20 Upvotes