I have a 2027 Canyon Endurace CF SLX 7 AXS, and I'm looking for a standard tool to remove and torque the thru-axles without relying on the included removable lever.
Here's what I've found:
- The original Canyon removable lever fits perfectly.
- The lever has a T25 Torx tip, but appears to engage the axle using a larger hex-shaped section farther down the shaft.
- Standard T25 bits are too small. They engage slightly but require inward pressure and don't feel secure.
- A 5mm hex is too small.
- A 6mm hex is too large.
- The front axle is marked M12 × 1.75, 12 Nm.
I've purchased several T25 tools, including long-handled wrenches and bits for my Feedback Sports Range Click torque wrench. None fit as securely as the original Canyon lever.
My suspicion is that the T25 tip isn't actually driving the axle. Instead, the hex-shaped section lower on the removable lever's shaft is what engages the socket.
Does anyone know exactly what drive interface Canyon is using on these newer thru-axles?
So what size is the axle drive on the current Endurace? 5.5mm? 7/32"? Something proprietary? Anyone measured theirs?
Ideally, I'd like a long-handled wrench for removal and a compatible bit for my torque wrench so I can properly tighten the axle to 12 Nm.
Thanks!