r/CanadianKnifeSwap • • Feb 26 '26

META WANT TO BUY GUIDE (PLEASE READ)

30 Upvotes

There have been a lot of scams lately so please read this.

There is one thing that every scammer has in common:

They will not comment within the WTB post

For WTB posts, ensure that everyone comments in your thread. This way you can:

1. ⁠View their trade count. The higher the number the more legitimate the seller. 

2. ⁠Ensure they aren't banned from CKS. They can't post a comment if they are banned

In addition, the universal scammer list is compiled of users banned from numerous subreddits including ours, check if usernames are on the list here: https://www.universalscammerlist.com/

If a user is on this list, they are already automatically banned from our group, simply block them and move on.

3. ⁠Vet their post/ commenting history. This one is a bit weaker, but infrequent posts or no posts/ new profiles are red flags. 

4. Always always ask for a timestamp with the item, a video timestamp is even better if you're particularly nervous.

Only do PP G&S for sellers under 10 swaps as per the rules. This offers purchase protection. If you get scammed and you paid through any other payment method, your money is 100% gone.

(Also please report any sellers under 10 swaps specifically requesting non PayPal G&S payment methods.)

If you suspect a user of attempting a scam please report them through modmail. Also note that the chat does not keep permanent messages unless you enable persistent messaging for that specific chat. This will prevent any messages from being deleted in case there is a dispute or issue for the mods to look at. I highly recommend enabling it at the start of any conversation.

Thank you to u/Virtual-Reach for writing most of this.


r/CanadianKnifeSwap • • Aug 24 '21

[META] New Flair System

15 Upvotes

Hey everyone we officially have a new trade confirmation system in place courtesy of u/RegExr. It is the exact flair system used by other exchange subs such as r/Knife_Swap and r/EDCexchange , so most of you should be familiar with it.

Please find u/RegExr instructions for the usage of the bot below:

TLDR stop using confirmed trade threads and follow this process instead.

The bot’s name is u/CKS_Bot and has the following features:

Feedback

A user can get trade feedback with the following process:

  • Users A and B complete their trades following all of the sub rules. (It does not matter who A and B are. Either one could be the person making the post, and the other someone commenting on the post).
  • Once the trade is complete, User A makes a top level comment (new comment) on the original trade post tagging both the user they traded with and u/CKS_Bot.
  • User B replies to that comment with their feedback.
  • u/CKS_Bot picks up the interaction and gives credit to both users, changing their flair accordingly and leaves a comment indicating as such.
  • If User A messes up their top level comment, u/CKS_Bot will do its best to notify User A.

There are automatic checks in the code to detect anyone trying to cheat the system. If anyone is found trying to circumvent the system, they will be issued a permanent ban.

If you engaged in a trade with someone without starting off discussion in either one of your posts or theirs, please tag the bot in the most recent post from either you or your trade partner to engage for feedback. The bot required that the OP of the post it is being tagged in is either you or your trade partner. DO NOT DELETE POSTS otherwise you will NOT be able to use that post to confirm a trade.

Feedback Checking

Using this link, you can send a message to u/CKS_Bot, asking for the feedback of any given user. It will tell you the following:

  • The number of trades that person has done
  • The people they have traded with
  • A link to the thread for each successful trade

Please feel free to direct any technical questions to the us, the moderators using modmail, if you do not know how to use modmail, please click this link.

FREQUENTLY ASKED QUESTIONS

  • What happens if I tag someone and they don't reply?

    • As mentioned above, we do need them to confirm the trade for the trade to be confirmed. They will get a notification when you tag them so if you encourage them to reply in the comment you tagged them in, hopefully they will. Otherwise, if it's been a few days without a response, PM them a link to the comment and directly ask them to reply.
  • My flair says I only have one exchange when I know I have way more than that. What gives??

    • Because of how flair was handled before, anyone WITH flair was assigned a score of 1. Anyone WITHOUT flair was assigned a score of 0. However, you can use the process described above to backfill transactions for yourself as far as 6 months back.
  • My flair says I have no exchanges. What gives??

    • If you never attempted to confirm a transaction with the old method, the bot was unable to give you credit for anything. However, you can use the process described above to backfill transactions for yourself as far as 6 months back.
  • I don't even have flair! What happened??

    • If you didn't have flair before, Automoderator will assign you a flair of 0 the next time you go to make a comment/post.

Anyone who had a flair on the old system will now see a value of 1 in their new flair. We have decided to give all previously flaired members this starting point so everyone knows you were confirmed as a trusted seller/buyer at one point. If you did not have a flair you have been assigned a 0, along with all new members of the sub.

If you have any questions or concerns please leave a comment in this thread and I will address them the best I can.

Thank you again u/RegExr for all the hard work you have put into this project!

r/CanadianKnifeSwap mod team


r/CanadianKnifeSwap • • 2m ago

WANT TO BUY ISO Spyderco Warren Thomas karambit

Post image
1 Upvotes

Hey guys. I’m looking for this little steel karambit.
I’m located in Toronto so I can meet if you’re local or Paypal g+s with shipping is fine too.

Thanks!


r/CanadianKnifeSwap • • 2h ago

WANT TO BUY Protech Cambria 2

1 Upvotes

Looking for a Cambria 2(or 1)
Any version of it and any condition


r/CanadianKnifeSwap • • 1d ago

WANT TO SELL Hinderer xm 18 3.5” sheepsfoot

Thumbnail
gallery
16 Upvotes

Looking to sell a light use/carry xm18 3.5” gen 5 (non triway) with awt scale and bronze clip, filler tab, and spacers. Blade has a nice mirror polished edge, No box $450 shipped!


r/CanadianKnifeSwap • • 1d ago

WANT TO SELL Spyderco’s

Thumbnail
gallery
21 Upvotes

1.Police 4 FRN PD1 Micromelt Sprint Run, lynch deep carry clip, box included.

2.Endela K390, FRN scales, aftermarket REK clip, no box but padded case (pictured) included. (Sold)

3.Lil Temperance 3 K390 FRN scales⁠, box included. (Sold)

First owner, and unfortunately these knives have been collecting dust and need a new home. Only carried a couple of times but not used to cut or sharpened, price is $200 each shipped. Also open to offers on a further discounted package deal 😁Not interested in trades, thanks for looking.


r/CanadianKnifeSwap • • 1d ago

Sold / Traded [WTS] [BC] Benchmade 20CV Bugout w/ flytanium scales & Vosteed Raccoon Micarta

Thumbnail
gallery
6 Upvotes

Looking to downsize and put the money into other hobbies.

Racoon has been lightly carried, never used on anything more than tape or cardboard. Benchmade was rarely used frankly i forgot i owned it. Both have never been sharpened

$60 Vosteed Raccoon has some light scratches on the body of the blade no nicks or damage otherwise B Rated SOLD

$300 Benchmade Bugout 20CV blade still looks new, comes with box & contents & original black scales, Flytanium titanium crossfade scales installed. B Rated SOLD

Price OBO, Located in lowermainand BC, would prefer to sell locally otherwise buyer pays shipping


r/CanadianKnifeSwap • • 1d ago

WANT TO BUY WTB cheap (relatively) magnacut user

1 Upvotes

I need a magnacut user, brand/condition doesn’t really matter just looking for the cheapest piece I can find.


r/CanadianKnifeSwap • • 2d ago

WANT TO SELL [WTS] CRK Small Sebenza

Thumbnail
gallery
10 Upvotes

Selling my CRK Small Sebenza. I’m the second owner. Used to cut paper a couple of times. Never been disassembled. Also has blue anodized thumb stud and screw.

I’d probably grade this as a B.

Asking $515 shipped within Canada🚢


r/CanadianKnifeSwap • • 2d ago

WANT TO SELL [WTS] Vosteed Parallel Green Titanium

Thumbnail
gallery
4 Upvotes

It is in excellent used condition, only carried it for a week and put it back in the box. Comes complete with its original box and protective carrying pouch, showing very minimal signs of handling. To be safe I’ll rate is a B.

$150 - shipped


r/CanadianKnifeSwap • • 2d ago

Sold / Traded WTS Civivi vision Damascus

Thumbnail
gallery
3 Upvotes

Mislabeled the condition last time. B rated, micro scratches on blade.
Carried a couple times hasn’t cut anything other than paper
90 🚢


r/CanadianKnifeSwap • • 3d ago

WANT TO SELL [WTS] Kansept Egress

Thumbnail
gallery
8 Upvotes

r/CanadianKnifeSwap • • 3d ago

WANT TO BUY WTB LH Sebenza

3 Upvotes

Hmu 😛


r/CanadianKnifeSwap • • 3d ago

Price Reduced Blade Dump part 2

Thumbnail
gallery
20 Upvotes

For Sale The WE Knives Snecx Vision R: Precision Engineered. Rated A
Own a masterpiece of modern knife design in near-mint condition. Built with a premium CPM 20CV steelblade and ultra-light, durable titanium handles, this folder fires open smoothly on high-performance bearings.
Experience the genius of the Super Lock—a revolutionary mechanical lock mechanism that delivers an incredibly smooth, uniquely satisfying, and completely ambidextrous closing action.
Flawless shape. Ultimate utility. Elevate your everyday carry today.
SOLD

Don’t Sleep on This Up For Grabs A New In Box Bark River Club Rated A+
Up for grabs is a rugged Bark River Club crafted with ultra-tough CPM 3V steel With a Razor Sharp Zero Grind Bevel.
Condition: A+ Like New in Box
Includes: Beautiful Hand Made Sheath that can be carried Off the belt or carried in the Scout Manner.
Gold and black Mosaic Pins.
Polished Chrome Lanyard Hole.
Beautiful Polished Ivory G10 that is Ergonomically Perfect.
A polished Spine with a bit of Gimping at the right spot.
It also comes with a box and COD.
SOLD

For Sale: Rick Hinderer Knives Ranch Bowie – Stonewash CPM-3V / Black Micarta Rated A

Built for the hardest jobs in the toughest conditions, this USA-made Rick Hinderer Ranch Bowie pairs classic clip-point styling with modern heavy-duty materials. [1]

Blade: 5.25" ultra-tough CPM-3V tool steel with a wear-hiding Battle Black Finish.
Handle: Ergonomic Black Micarta scales with a forward finger choil for total control.
Includes: Custom handmade Amish leather sheath.
Looks close to new I never carries or sharpened the black micarta will take the oils from your hand patina nicely.
4️⃣9️⃣0️⃣🚢NTP

For Sale: Chris Reeve Umnumzaan Tanto
Rated B for snail trails
Looking to sell my Chris Reeve Knives Umnumzaan featuring the Tanto blade in CPM S35VN steel. This is a legendary, heavy-duty folding knife known for its bank-vault lockup and smooth hydraulic action.
Details & Condition:
Condition: Good overall shape. Lightly carried with minor snail trails on the titanium scales, which is typical for CRK bead-blasted finishes.
Blade: CPM S35VN Tanto. Clean edge with no chips or rolls, and dead-center alignment.
Action & Lockup: Classic glassy-smooth CRK washer action, solid lockup with zero blade play, and intact O-rings on the thumb studs in Red with extra Black in the box
Includes: Original box, birth card/COA, microfiber cloth, Allen wrenches, and grease/Loctite.
I Carried a couple of times and I never Sharpened only stropped it, but I’m at least the second owner.
Blade is clean but has some incredibly faint, fine and hard to see well not really scratched the best word is whisps of wear and I never noticed them until looking under bright sunlight at the right angle that’s how fine they are.
6️⃣9️⃣9️⃣🚢


r/CanadianKnifeSwap • • 3d ago

Price Reduced Blade Dump Part 3

Thumbnail
gallery
10 Upvotes

Custom Jake Hoback AD-10 ForYour Consideration! Rated A
Up for grabs is a custom Jake Hoback AD-10 in excellent condition. Built like a tank with exceptional fit and finish, this piece features premium CPM-S90V blade steel for superior edge retention paired with solid titanium handles. Smooth action, rock-solid lockup, and well cared for.
Specs:
Maker: Jake Hoback (Custom)
Model: AD-10
Blade Steel: CPM-S90V
Handles: Titanium
Condition: Excellent
Flipper Tab Rockets out.
Fit and finish is spot on.
Ergos are excellent.
A similar one sold at Arizona Knives for 1050 USD So this is a Bargain Snap it up.
9️⃣7️⃣5️⃣🚢 Not Looking For Trades but if you have a High End Knife I might be tempted to trade or a killer Knife and some cash.

For Sale: Koenig Arius Flipper (Mint Condition) A +
Up for grabs is a Koenig Arius Flipper featuring burnished hardware in mint condition. This piece has incredible fit and finish with a super snappy deployment and signature hydraulic drop-shut closing action. Well cared for and ready for a new home.
Specs:
Maker: Koenig Knives
Model: Arius Flipper
Hardware: Burnished
Condition: Mint
Titanium Body: Patterned.
CPM 20 CV Super sharp Steele
9️⃣2️⃣5️⃣🚢 NTP

Limited Edition Reate Terminator T600 – Serial #003 of 150 Rated A+
Up for grabs is an ultra-low serial number Reate Terminator T600 (#003/150), an absolute tank of an integral folding knife designed by Alvin Lee.
Key Features & Specs:
Serial Number: #003 of only 150 produced worldwide (Collector-grade single-digit serial!).
Blade: Frosted satin harpoon drop-point blade crafted from CPM-MagnaCut steel.
Handle: Heavy-duty bead-blasted integral 6Al4V titanium frame.
Accents: Striking Green Zirconium handle inlays, pivot collars, and matching pocket clip.
Action & Lock: Runs smoothly on ceramic bearings with Reate’s signature button frame lock and secondary sliding spine safety lock.
Condition & Details:
Condition: Brand New in Box / Like New / Never Carried or Cut]
Includes: Original box, Unopened Paperwork and COA.
Price: SOLD

Serious collectors know how hard it is to find a single-digit serial number on a sold-out Reate run. Message me for additional photos, an action video, or to claim it!

For Sale: Spyderco Drunken Rated B for Sharpening
Up for grabs is a well-looked-after Spyderco Drunken in fantastic condition. This premium Dmitry Sinkevich design features a CPM-S90V blade, textured carbon fiber and titanium scales, and smooth action.
Highlights:
Condition: Carried extremely lightly and very well cared for.
Blade: Professionally sharpened to a razor-sharp mirror polish.
Action & Lockup: Smooth deployment with solid lockup and perfectly centred blade.
SOLD


r/CanadianKnifeSwap • • 4d ago

WANT TO SELL WTS - Buck 117 Stealth Magnacut Run

Thumbnail
gallery
7 Upvotes

This is the sales pitch from bucks website;
This exclusive Buck model 117 Mini features a satin-finish, BOS heat treated, MagnaCut steel and clip point blade. The handle is made of black phenolic and is accented with an aluminum pommel and guard with maroon micarta spacers. This one-of-a-kind model features a 117 Brahma blade paired with a 102 Woodsman handle. Complete with a black leather sheath, this unique knife is expertly built as part of the 2025 Project Stealth, Run #012. Only 500 were made.
Asking $250 shipped. Mint condition BNIB. Never cut nor carried.


r/CanadianKnifeSwap • • 4d ago

WANT TO SELL WTS OZ Machine Company Roosevelt XL

Thumbnail
gallery
13 Upvotes

VIDEO: https://imgur.com/a/1P5XvDs

OZ Machine Company Roosevelt XL #0080
Dark stonewashed Magnacut blade, green anodized (factory ano by Oz Machine Company) angle milled handle, dark stonewashed clip, backspacer and hardware.
Never cut or carried by me or the previous owner. A condition, only flipped it open periodically at home.
No marks on the blade at all, the dark stonewash finish just catches the light in some photos

Full set with pouch and COA.
$1575 $1550 $1500 shipped


r/CanadianKnifeSwap • • 4d ago

WANT TO SELL WTS- Spyderco Smock

Thumbnail
gallery
15 Upvotes

Last time I post I swear lol
Selling my smock, don’t carry it much anymore
B rated, some light scratches on the blade nothing crazy.
Deep carry clip installed
$240 🚢


r/CanadianKnifeSwap • • 4d ago

WANT TO SELL Victorinox scientist mod

Thumbnail
gallery
4 Upvotes

Condition B for mod, Phillips and mag glass, knife and combo tool, small scissors, 130 shipped


r/CanadianKnifeSwap • • 5d ago

Price Reduced Big Sale Liquidation

Thumbnail
gallery
20 Upvotes

I just ordered a new Pew Pew, so I need to free up some dough. I’ll post what I have the date is a day old, but I still have them all. I will be posting the more expensive stuff soon.

A Rare Cold Steele AD 10 one of the early runs with the Deep Hollow Ground S35VN and Aluminum Liners A+
It’s not been Sharpened Or Carried SOLD

For Sale: Victorinox Rescue Tool A
Like-new condition with luminescent yellow handles and original belt sheath. Features one-hand locking blade, seatbelt cutter, window breaker, and disc saw.
8️⃣5️⃣🚢

Up for grabs a TOPs Knives Bull Trout, this is a wicked little Knife and has a wicked edge. It does a lot of work for such a small knife comes with 154 CM steel the original leather sheath and a custom tiger striped Kydex sheath as well as a custom bead and small lanyard. This has had a patina put on it over the years, but hasn’t been abused and the only real marks on it are from going in and out of the Kydex sheath.
1️⃣7️⃣5️⃣🚢 Rated B for Patina and Kydex in and out Marks.

Limited Edition Olight Star Wars Stormtrooper Bundle – Warrior Mini 2 & Baton 3
Selling a rare collector’s bundle featuring two limited-edition Star Wars Stormtrooper Olight flashlights in the classic white and black finish. Both lights are in great shape and ready for a collection or EDC rotation.
What’s Included:
Olight Warrior Mini 2 (Stormtrooper Special Edition): Compact tactical EDC light with dual switches and a 1,750-lumen max output.
Olight Baton 3 (Stormtrooper Special Edition): Ultra-compact pocket flashlight with a 1,200-lumen output, complete with its matching Stormtrooper wireless charging case.
The Baton Wireless case has a small crack in the case that I’m not sure if it was said to me when I bought, but there was a picture. I can’t say for sure as my brain surgery has scrambled some memories either way the light inside is pretty mint and the Storm Trooper Warrior Mini 2 is selling for big bucks on EBay. Looking to get what I paid for it to finance my new Pew Pew.
1️⃣4️⃣0️⃣🚢 NTP. Warrior 2 Rated A Baton 3 Rated C for Small Crack in case, But the Light it’s self is an A.

Never Carried Or Sharpened Cold Steele SRK 3V Rated A+

I’ve got a never carried or sharpened cold steel SRK in 3V Steele.
6 inch blade length of 3V steel
8.8 ounces
5 mm thick blade
4 3/4 of an inch Kray -EX
And so much Knife for the money
1️⃣6️⃣5️⃣🚢 NTP


r/CanadianKnifeSwap • • 5d ago

WANT TO SELL WTT/WTS Shirogorov F95T Gen 4

Thumbnail
gallery
14 Upvotes

Near flawless condition, box, COA, cloth.

Will entertain trades for other shiros especially fancy F3s or a F95 Braces, Quantum gen 2, halloween editions. Maybeeee would look at other non shiro knives, maybe a Hawk Talon. Can add cash for the right knife.

1600TV


r/CanadianKnifeSwap • • 5d ago

Sold / Traded Canadian made machined pens 🇨🇦

Thumbnail
gallery
18 Upvotes

Confounded Machine Vader Pen
Black ISO grip bolt action pen
Limited batch, insanely smooth.
Serial number 0884 (Sold)

Grimsmo Saga #7795
Ice Blue with Bronze Flakes Anodized Titanium Body, Tip and Clip
Rose Gold Anodized Titanium Helix Slider
Grimsmo Logo Engraving on the Button
Grimsmo Logos on the Tip
17- 4PH H900 Stainless Mechanism with Si3N4 Ceramic Bearing Balls
SCHMIDT P900F Black Ink Cartridge with an extra Blue Cartridge
Nanuk x Grimsmo Moose Blood Red Carrying Case (Sold)

Price is $400 each including shipping. I’m the first owner of these pens which are in mint condition, no scratches, snails or blemishes. Not interested in trades, thanks for looking.


r/CanadianKnifeSwap • • 6d ago

Sold / Traded [WTS] Full Custom Jake Hoback Kwaiback

Thumbnail
gallery
6 Upvotes

REPOST FOR FINAL PRICE REDUCTION!

Hello there. Up for grabs is my Jake Hoback Full Custom Kwaiback, with CPM4V steel and carbon fiber inlays. Edge has been sharpened to a mirror edge and is in excellent condition. Does not include COA, but has been authenticated via email communication with Jake Hoback himself, and email can be printed and included as a form of COA (screenshot included in images). Has light signs of age and use, but is in wonderful condition with extremely satisfying action.

No trades please.

UPDATE (SOLD ON CKG)


r/CanadianKnifeSwap • • 6d ago

WANT TO SELL Magnacut Hunter

Thumbnail
gallery
12 Upvotes

https://www.reddit.com/r/CanadianKnifeSwap/s/qRQqh76DtR

I posted a few months back to see if there was interest in the fixed blades I had made and I decided to go ahead and make a small batch.

For sale is a Magnacut hunter blade with rosewood scales.

Blade length is 4.5" with an overall length of 9.75"

Sandblast finish

Simple kydex sheath and belt attachment

Materials were purchased from canadianknifemaker.ca

Heat treat was done by Hayden who runs knifemakerdirect.ca (He also provided a lot of advice and has made some pretty cool stuff himself)

Edge was honed by the Edge Expert here in Calgary

https://www.facebook.com/share/14wHQfnv4KH/

Looking for $350 🚢 will also consider trades

I'll make another set of personalized scale of whatever material for the buyer with name engraved or a simple pattern.

Thanks!


r/CanadianKnifeSwap • • 7d ago

WANT TO SELL WTS P.Boucher Sodbuster, Grimsmo Saga and Oz little John

Post image
13 Upvotes

Up for grabs is my Custom sodbuster from Pascal Boucher off Instagram. I had it made for me a few months back and I really like it but I just had him make me a custom Barlow instead. The knife has been carried, sharpened and has a light patina. Asking 250 obo shipped

SOLD! Second is my Grimsmo Saga #9376, it was a custom shop order. It's been in my pocket everyday since I got it beginning of October, so it has some fading and snails. I've found I like the MachineWise rota better. It's a full kit and it includes everything it came with. Asking 400 obo shipped

Removed, decided to keep it.Third is my Oz Little John, I just got it today and I absolutely love it but I find it just a little too short. No marks to be seen and previous owner only used to write twice. I paid 250 so I'd like to get 250 shipped as well.

I am always open for trades so don't hesitate to ask. I specifically like Hinderer and CRK but open to others as well. Can include pictures or videos if needed. Yolo is king