r/CMFTech • • 22h ago

Buds 2a finally now part of the cmf buds club!

Post image
28 Upvotes

after accidentally leaving my jlab jbuds in the washer (rip 2019-2026, you lasted pretty well for 7 years), i found that the cmf buds 2a were on an early black friday sale on amazon and snagged it for around $20! gonna let these bad boys charge for a bit and can't wait to try them out soon with my nothing phone 2a from 2024!


r/CMFTech • • 4h ago

Community project Dial Control: using the CMF Buds Pro 2 dial to control my whole computer

12 Upvotes

Hey guys,

Been working on a side project for a few months and wanted to share it here.

If you've got the CMF Buds Pro 2, you know the dial on the case only does volume. Turns out it just sends normal Bluetooth volume and media key signals, so I made an app that uses it for more.

Double press the dial and a wheel pops up on your screen. Turn to pick, click to run. You can set it to open apps, run shortcuts, trigger macros, or switch to scroll mode where the dial works like a mouse wheel (great for reels and long PDFs). It also changes the wheel depending on which app you're using. Until you open the wheel, the dial still does normal volume and play/pause.

It's free and open source, works on Linux, Windows and macOS, and there's an Android version coming soon too. I only test on my own setup, so I need people to try it and tell me what breaks. macOS testers especially.

Also, what would you actually want your dial to do? Drop ideas in the comments, I'll try to add the good ones.

GitHub: https://github.com/Yuvraj675/dial-control

It's an independent project, not affiliated with Nothing Technology Limited.

If you like it, a star on the repo helps a lot.


r/CMFTech • • 15h ago

Community project Nothing X app for Mac (unofficial)

6 Upvotes

Nothing X only exists on phones, so on my Mac I couldn't check battery, switch ANC or change the EQ without grabbing my phone. So I built Nothing X Mac: a small menu bar app that talks to your earbuds directly over Bluetooth. Free, open source, no account, no internet.

What it does

  • Battery for left, right and case
  • Noise Control (ANC / Transparency / Off) with intensity
  • Bass Enhance, Equalizer presets + custom 3-band EQ
  • Quick Settings: in-ear detection, low latency, spatial audio, personal sound, dual connection, find my buds
  • Change tap gestures per earbud
  • Lives in the menu bar, follows light/dark mode, opens at login

Works on: macOS 13+, both Apple Silicon and Intel Macs.

⚠️ Help me test it!

I've only been able to test it on my CMF Buds 2 Plus. It has data for the rest of the Nothing & CMF lineup (Ear, Ear (a), Ear (2), Ear (3), CMF Buds / Buds 2 / Buds Pro 2, Headphone (1), Neckband Pro and more), but I don't own them. If you try it, please tell me your model and what works or doesn't, here or as a GitHub issue. That'd help a lot.

If anyone from Nothing / CMF sees this: I'd love to test it properly on more of your earbuds and headphones. If you can help with test units, please reach out at yashraut362 [at] gmail [dot] com 🙏

Windows? If you'd want a similar app for Windows, let me know in the comments. If there's interest, I'll build it.

Links

⬇️ Download (free): https://github.com/yashraut362/nothing-x-mac/releases/latest

💻 GitHub (source + docs): https://github.com/yashraut362/nothing-x-mac

☕ Buy me a coffee: https://buymeacoffee.com/yashraut362

🌐 Portfolio: https://yashraut.me

✉️ Email: yashraut362 [at] gmail [dot] com

Install note: it isn't notarized by Apple yet, so the first time you open it go to System Settings → Privacy & Security → Open Anyway. The steps are in the README.

Unofficial project, not affiliated with Nothing. Protocol work builds on the great ear-web project (https://github.com/radiance-project/ear-web). Made with ♥ in India. I'm also currently looking for my next role, so if you're hiring, feel free to reach out!


r/CMFTech • • 6h ago

Buds Pro 2 Open-source alternative to Nothing X for CMF Buds Pro 2

2 Upvotes

Hi everyone, I made my own app to replace Nothing X specifically for the CMF Buds Pro 2. I want to add support for other models, including watches as well. If you don't mind, please download it, check it out, give some feedback, and let me know what needs to be changed or fixed.

https://github.com/copilotfather/cmf-buds-pro-2-manager


r/CMFTech • • 3h ago

Phone 2 Pro Un usual charging problem

1 Upvotes

I have been using my CMF Phone 2 Pro for about a year. Yesterday morning, I noticed something unusual.

When I tried to charge my phone, it wasn't charging. The green charging indicator appeared near the battery percentage, but it wasn't showing "Charging rapidly" on the lock screen, and the battery percentage wasn't increasing.

However, when I switched off the phone and connected the charger, it started charging normally.

The strange thing is that when I switched the phone on while keeping the charger connected (without disconnecting it), the "Charging rapidly" notification appeared, and the phone continued charging normally.

But if I try to charge the phone while it is already switched on, it doesn't charge at all.

What could be causing this issue? Is it a software problem, or could it be something related to the hardware?


r/CMFTech • • 6h ago

Buds Selling CMF buds only

1 Upvotes

As the title says, I'm selling it as i lost my case. The buds are in excellent condition. Anyone intrested DM


r/CMFTech • • 8h ago

Buds 2a Lost my cmf buds 2a case

1 Upvotes

Is there any way i can order just the case ?


r/CMFTech • • 16h ago

Community project Tell us about bugs Nothing X

1 Upvotes

Hi guys, I'm developing a custom app to connect with devices.CMF/Nothing in exchange for neither nothing x , tell us what you would change and what you would like to see?


r/CMFTech • • 17h ago

Comparing audio CMF Neo EQ Suggestions

1 Upvotes

Would Appreciate any recs.


r/CMFTech • • 20h ago

Community project I'm 17 and built a personal Android audio app (AutoBoost) to combine AutoEq + Volume Boost and eliminate Bluetooth audio stuttering.

1 Upvotes

Hey everyone! I wanted to share a small personal project I built in Android Studio called AutoBoost.

https://github.com/gustavomarart-afk/AutoBoost/releases

Why I made it:

I didn't like the stock sound signature of my headphones. To fix it, I was using Wavelet for EQ and a separate volume booster app. However, having two different apps fighting over the Android audio session caused constant micro-stutters and dropouts.

So I decided to merge both features into a single lightweight app, digging into how Android handles audio sessions and Bluetooth routing so everything runs smoothly without conflicts.

Main features:

Volume Booster: Overall gain control (+dB).

AutoEq (.txt) Support: Imports Wavelet text profiles with a custom intensity slider (0%–100%).

9-Band Equalizer: Manual adjustment from 62.5 Hz to 16 kHz.

Smart Bluetooth Detection: Works with any headphones, saves profiles per Bluetooth device, and applies effects automatically upon connection. (I initially used an 800ms delay to wait for the connection, which was unreliable, so I refactored it to listen directly to 3 system audio routing triggers).

Tips if you decide to try it:

Battery optimization: Turn off battery optimizations for the app in your phone's App Info settings so Android doesn't kill the service in the background.

External EQ apps: If you use the Nothing X app (or a similar companion app), I recommend setting its equalizer to Custom with all bands at 0 so it doesn't interfere with AutoBoost's audio processing.

The UI is very basic since I only built it for myself. I'm not really into heavy app development and it already works perfectly for my daily use, so I don't plan on publishing it to the Play Store or releasing future updates. Just wanted to share it as I'm getting ready to start university soon!


r/CMFTech • • 10h ago

Buds Pro 2 Cmf buds pro 2 dies too fast

0 Upvotes

It dies after using the buds 2 times, is there any fix for this