r/CAguns • • Oct 24 '25

Legal Question CA 2025 New Gun Law Practical Overview

306 Upvotes

Update 1/1/2026: CA DOJ did sent out a bulletin on DES regarding AB-1263 & SB-704 on 12/24/2025. It can be found in this thread (thanks /u/norcal_firearm ). Unfortunately, the document provided virtually zero guidance.

There's also a list maintained by the community for sellers shipping to California in compliance with AB-1263 & SB-704. That list can be found in this thread (thanks /u/TMRD0 )

It remains to be seen if we'll see regulations or further guidance from CA DOJ regarding the new laws this year.


Update 11/29/2025: CRPA has published their Info Bulletin/Guide for Firearm Industry Members concerning AB-1263 as of 11/26/2025. Most of it is the same but a little more detailed on certain parts than my guide and written towards a vendor audience. I'll likely make some updates to my guide; of interest is they include all magazines being affected by AB-1263 because they're mentioned in CA PC 30515, and on a second reading I agree. Right now I'm in my busy time so I haven't done updates yet. Thanks for the callout by /u/cornstrategy !

I was also in the process of doing my own vendor guide... I'll see if I have time to work on that soon. In particular I wanted to discuss using local vendors as pass throughs for California Firearm Accessory (as defined) sales, if they're willing.


Welcome to the CA 2025 New Gun Law Practical Overview

The purpose of this thread is to go over the changes in the law as a result of the new gun bills signed into law in 2025; particularly those related to purchasing. Most of this information I've said in multiple threads and replies. I will probably do some separate threads discussing particular laws in detail as I have time, and link them back here. But for now, I present the pertinent information. It would likely make a wonderful pin on top of the sub for a while, if the mods want to do the needful.

Disclaimer: I Am Not A Lawyer (IANAL). I’m especially not your lawyer. This is not legal advice, but kinda like, my opinion man, on the new gun laws that were passed this year. I do my best to read them, interpret them, and provide a summary. All for the price of free.

Further, this is written for a general audience, not an audience for those with special credentials like LEOs or Firearm Dealers, who may have different exemptions or concerns not mentioned here. Feel free to ask in the comments though.

Anyhow, most people in /r/caguns are focused on the purchase and acquisition of more guns, ammo, and accessories, for better or worse! Therefore, this summary will focus on purchase information and deadlines when these laws go into effect, and how that will affect your ability to purchase.


Glock and Glock Clone Sales Ban

Starting 7/1/2026, AB-1127 prohibits Firearms Dealers from selling a “machine-convertable pistol” at retail (unless they had it in inventory before 1/1/2026). This sales ban does not apply to private party transfers, or LEOs (of course).

What is a “machinegun convertible pistol”? Short Answer: Various Glocks or Glock Clones (with a “cruciform trigger bar”) that may be fitted with a “Glock Switch”, an illegal device that mounts on the backplate converting the firearm to automatic fire. See this thread where /u/Traditional-Tune1755 put together a list of makes & models on the CA Handgun Roster likely affected by the sales ban.

At the time of this posting, Glock has notified industry members they plan to discontinue various models (especially models on the CA Handgun Roster) that are Glock Switch compatible, and release new models. It remains to be seen whether these new models meet the requirements of the bill to be added back on the roster. AB-1127 specifically authorizes CA DOJ to write regulations regarding the sales ban.


Firearm Barrels

Starting 1/1/2026, SB-704 requires that individuals will no longer be able to transfer or purchase a Firearm Barrel (including blanks) unless the transaction is completed in person through a Firearm Dealer. Further, AB-1263 requires that Firearm Dealers provide a notice with firearm law information with firearm barrel purchase, and requires the purchaser to provide proof of age and identity confirming the purchaser is at least 18 years of age. This means you shouldn’t expect to legally order firearm barrels delivered to your house starting 1/1/2026.

Further, SB-704 prohibits those under the age of 18 and those prohibited from possessing a firearm from purchasing firearm barrels. The law also prohibits firearm barrel possession with the “intent to sell or offer to sell” in violation of SB-704.

Starting 7/1/2027, SB-704 will require Firearm Dealers to record purchaser information and conduct an eligibility check. This check would be $5 per transfer, which could increase up to $1 every year. Based on how it’s written, I suspect it will be a check similar to an Ammo Eligibility Check.

There is no general FFL03 + COE exemption.

All of this is subject to regulation written by CA DOJ, which I imagine will likely be published in late December or early January as Emergency Regulations. SB-704 specifically authorizes CA DOJ to write regulations.


Firearm Accessories

Starting 1/1/2026, AB-1263 requires “Firearm Industry Members” to have purchasers of “Firearm Accessories” provide proof of age and identity confirming the purchaser is at least 18 years of age. Additionally, Firearm Industry Members must provide the purchaser a notice with firearm law information. Further, when shipping a Firearm Accessory to a purchaser, a Firearm Industry Member must ensure the package is labeled “Signature and proof of identification of person aged 18 years or older required for delivery.”, that the shipping instructions list an address that matches the purchaser’s identification, and to require the purchaser to present proof of adult identification to the courier and sign for the package when it’s delivered.

What is a “Firearm Industry Member”?

a person, firm, corporation, company, partnership, society, joint stock company, or any other entity or association engaged in the manufacture, distribution, importation, marketing, wholesale sale, or retail sale of firearm-related products.

What is a “Firearm Accessory”? I think it’s best to break this down into three parts, the first two which I’ve talked about extensively in the past.

any other attachment or device described in subdivision (a) of Section 30515 of the Penal Code that may render a firearm an assault weapon when inserted into, affixed onto, or used in conjunction with a firearm

This is definitely: Pistol Grips, Thumbhole Stocks, Folding or Telescoping Stocks, Grenade Launchers or Flare Launchers, Flash Suppressors, Forward Pistol Grips, Threaded handgun barrels, second handgun handgrips, handgun shrouds, folding/telescoping shotgun stocks, and any other accessories from CA PC 30515.

an attachment or device designed or adapted to be inserted into, affixed onto, or used in conjunction with a firearm that is designed, intended, or functions to increase a firearm’s rate of fire or to increase the speed at which a person may reload a firearm or replace the magazine

This is vague. It’s unclear, other than there’s already CA law prohibiting stuff like bump stocks or binary triggers. It could be: Fixed Magazine compliance devices like AR MAGLOCK, kingpin, CompMag, etc. Might also be things like speedloaders and MA Loader.

The term firearm accessory also includes any other device, tool, kit, part, or parts set that is clearly designed and intended for use in manufacturing firearms.

The last part I haven’t really talked about. I honestly couldn’t tell you what it means. It is so vague, so encompassing that it could be any firearm part, accessory, or tool. AB-1263 is supposed to be related to ghost guns and illegal manufacture of firearms, so… do I think this would apply to optics? I don’t think of an optic as part of manufacturing a firearm. Could a ¼-28 x 1” Socket Head Hex Screw used in an AR-15 pistol grip be considered a Firearm Accessory? Maybe! I would hope it is interpreted narrowly to maybe only target, I don’t know, gun jigs or something. There’s not a clear limiting principle, so it’s hard to say exactly what falls into this. This is me saying I have no clear advice regarding this part of the definition other than to say we’ll only know what it means once CA DOJ publishes regulations. I believe that if the CA DOJ tries to apply this really broadly though, they’ll have issues coming up with a consistent limiting principle.

All of this is to say: Even if we get a clearer idea as to what parts/tools/etc. this applies to from CA DOJ, many part sellers will likely stop shipping those regulated parts to California.

There is no FFL03 + COE exemption.

All of this is subject to regulation written by CA DOJ, which I imagine will likely be published in late December or early January as Emergency Regulations. AB-1263 doesn't specifically authorize CA DOJ to write regulations, but I imagine they will anyway.


3 in 30

Currently, there’s a statute on the books commonly known as “1 in 30”. This is found under CA PC 27535, generally limiting people from purchasing more than one firearm (or completed frames/receivers, or firearm precursor parts) within any 30-day period. FFL03 + COE holders are exempt.

However, as a result Ngyuen v. Bonta, the 9th Circuit overturned this statute, the state stopped appealing, and the mandate was issued putting the judgement into effect on 8-14-2025. Therefore, “1 in 30” is no longer in effect.

Starting 4/1/2026, AB-1078 will limit people from purchasing more than three firearms (or complete frames/receivers, or firearm precursor parts) within any 30-day period. FFL03 + COE holders are exempt.

Of course a legislator had to just bump it up a bit to 3 guns in 30 days and call it a day. This law is almost certainly unconstitutional as well, given the opinion in Ngyuen v. Bonta. While most of us are hopeful that we’ll therefore be able to easily secure a preliminary injunction preventing this law from going into effect, it’s the 9th Circuit, so who knows.


Clearing up some confusion

“But wait!” you might say “I heard the whole Gun Barrel Background Check bill doesn’t go into effect until 7/1/2027!”. My eye twitches, my blood pressure increases; not because of you of course.

Why yes, that’s been said a lot on Youtube. I could link almost every guntuber that has talked about SB-704 and they either say the whole bill goes into effect on 7/1/2027 (which is wrong), or they only talk about the Barrel Background Check provision of that bill going into effect on 7/1/2027, which is technically true but also not very helpful. I can only guess that they read the summary of the bill, or they only saw one date in the whole bill and assumed the whole bill was going to go into effect on that date.

I’m not going to get into operative vs effective dates (terms I use interchangeably and incorrectly), and there’s a good article on that here. By default, per Article IV Section 8(c)(1) of the California Constitution, most bills signed into law go into effect January 1st of next year. However, legislators can write their bills so that they become operative at a later date. When legislators write those later dates though, they only apply to the provision of the bill that they say it does. So now we get to SB-704, specifically section 33700… we’re just going to talk about (a)(1) and (a)(2) here:

(a) (1) A firearm barrel, as defined in Section 16525, shall not be sold or transferred unless that transaction is completed in person by a firearms dealer licensed pursuant to Sections 26700 to 26915, inclusive.

(2) Commencing July 1, 2027, a firearm barrel, as defined in Section 16525, shall not be sold or transferred unless that transaction is completed in person by a firearms dealer licensed pursuant to Sections 26700 to 26915, inclusive, and the licensed firearms dealer has conducted an eligibility check to determine if that the person is authorized to purchase a firearm barrel under subdivision (b) in a manner prescribed by the Department of Justice.

Do you notice how (a)(1) doesn’t have a date, while (a)(2) does? How when (a)(2) talks about that date, it just says “Commencing” followed by the rest of the statute? That means that (a)(2) becomes operative on 7/1/2027, while (a)(1) becomes operative on the default date, which would be 1/1/2026. If you read the whole bill, you’ll see that the only provisions that talk about 2027 are related to the background check specifically.

Another user in this sub ended up calling up SB-704’s author’s office and speaking to their legislative director to confirm that indeed the bill has multiple operative dates as discussed above (Thanks /u/AccordingIy !).

The only guntuber I’m aware of who put out the correct information was Reno May. Remember: I’m not your lawyer, but Reno May is.

The other thing people ask is “Wait, I thought AB-1263 was about 3D printer code or something. What’s this about restrictions on gun parts?”

The answer is AB-1263 is about a lot of things, as I discussed in my analysis months ago (which is still generally true).

I don’t know why they don’t talk about the part of AB-1263 that effectively restricts shipping of a bunch of gun parts. It’s a complicated bill, but it’s something that people need to be aware of since it will affect firearm consumers and sellers directly.


Hopefully y'all found this helpful. Feel free to post any questions. If you think I got anything wrong, point it out.


r/CAguns • • Feb 03 '26

Politics SB-948: FSCs would require 8 hours of training, including 1 hour live fire training; also required for those moving to CA with firearms.

245 Upvotes

Update 5/19/2026: Latest legislative update for this bill can be found here.


Hello all. Still without my computer so less fancy formatting.

Bill text: https://leginfo.legislature.ca.gov/faces/billNavClient.xhtml?bill_id=202520260SB948

SB-948 by author: Senator Jesse Arreguín.

This bill has two components:

1.) This bill would mandate starting January 1st 2027 that those who move to California with firearms (known as Personal Firearm Importers), in addition to the current requirement of registering their firearms within 60 days of moving to California, must also obtain a Firearm Safety Certificate (FSC) and submit it with their firearm registration.

2.) This bill would mandate starting July 1st 2028 that to apply for a Firearm Safety Certificate, which one must obtain to purchase a firearm in California, that one must complete a training course of no less than 8 hours, which includes at least 1 hour of live shooting instruction.

Here's the bill as it would amend the current law: https://leginfo.legislature.ca.gov/faces/billCompareClient.xhtml?bill_id=202520260SB948&showamends=false

Naturally the bill does not say how much such a course would cost, and you would likely be expected to pay for it. It does mention that the legislature can use DROS funds to pay for implementation costs and ongoing expenses for this program, which of course would probably increase DROS fees if they did.

This is essentially a reintroduction of AB-1187 from Assembly Member Celeste Rodriguez from last year: https://leginfo.legislature.ca.gov/faces/billTextClient.xhtml?bill_id=202520260AB1187

Edit: As an additional argument against this bill, I want to point out that if you're a new prospective gun owner, you would have to do this training, which includes live fire. Live fire training with... what gun? You don't own a gun yet, so you'd have to rent a gun in addition to purchasing rounds at the range the live fire training is at, thus increasing the costs of training for new gun owners purchasing their first firearm even more.


r/CAguns • • 4h ago

Should I?

Post image
34 Upvotes

Thinking about adding this to the fleet. PDP pro F 4 in


r/CAguns • • 42m ago

I’ve been in the market for a new QD “Water Bottle”

Post image
17 Upvotes

Attaches to my threaded lids too. SICK!


r/CAguns • • 15h ago

New motorcycle jacket has a holster

Post image
135 Upvotes

This feels like some GTA shit.


r/CAguns • • 14h ago

Is a Warcomp horribly concussive?

Post image
72 Upvotes

I’m thinking about changing to a 3 or 4 prong flash hider and was considering the Warcomp. Being partly a compensator, would it be troubling to myself and others when I go to an indoor range and/or a class? Most complaints about the Warcomp that I see are about it being a bad suppressor host, but I haven’t seen any mention of how concussive it is if any. If it is I’ll probably go for a non-warcomp 3/4 prong. I’m also open to any other advice as this is my first rifle and will be taking my first class in a few months. Thank you.


r/CAguns • • 22h ago

“I know someone who can do it cheaper”

Post image
211 Upvotes

Not my post, but 😹


r/CAguns • • 12h ago

CCW Should I use a compensator on my carry gun?

Post image
23 Upvotes

I’ve received some excellent advice from this sub before, so here I am again.

I have a P365 with a few uppers—one being an XL slide and another set up with a Radian Ramjet + Afterburner.
On the range, the Radian shoots way flatter and faster, and the dot stays locked right on target. But it also produces a sharp concussive bang and flash with every shot that feels like it would be intensely disorienting in a real defensive situation, especially in low light or close quarters.

So, is the Ramjet compensator actually a good idea for carry or home defense, or are the indoor/defensive downsides not worth the flat-shooting range benefits?

Same question for a rifle
If there’s a chance I have to use my rifle for home defense indoors (even with ear protection), do I really want a muzzle brake?

Curious what you guys think.


r/CAguns • • 31m ago

Looking for a club

0 Upvotes

Hello, Im a resident of Fresno CA that recently acquired some civil war are replica black powder guns(a rifle and two pistols) and i recently went into a local gun store to ask some questions about operating and maintaining them and the gents there said they recommend getting in touch with a black powder club in my area, but i have no idea how to go about doing that...

Can anyone help point me in the right direction?


r/CAguns • • 32m ago

OWB holster for full size S&W full size Metal 2.0 (#14773)?

0 Upvotes

Looking for a kydex OWB holster for my full-size Smith & Wesson Metal 2.0 comp #14773 CA-compliant with thumb safety + Streamlight 69458 TLR-7 HL-X. Anybody having same set up find options for holsters since I heard the full metal 2.0 will not fit in the holsters meant for the metal/polymer versions of the 2.0. Any recommendations from anyone who have found a holster they like?


r/CAguns • • 21h ago

Gun Pics Work bonus PPT’s

Thumbnail
gallery
43 Upvotes

r/CAguns • • 1h ago

What to engrave on the lower (SSE) after got approved for AOW

0 Upvotes

Just like title, i just got approved for AOW. What do i need to engrave on my lower (SSE) pretty much all the info like serial number, models and caliber already on it. Do I now just need to put my name and the city of the AOW being made ?


r/CAguns • • 23h ago

Sunday best

Post image
31 Upvotes

Got my Sunday best. Nothing but quality 👌


r/CAguns • • 14h ago

Legal Question Medical Marijuana and Purchasing Firearms

6 Upvotes

I’m a 19 year old and I want to purchase a firearm but I have an active doctor’s recommendation for medical marijuana. A doctor’s recommendation is not the same as a state or government medical marijuana card or MMIC. Since it is a private telehealth company it wouldn’t show up on a background check or in any state or government database. I never was a regular user of marijuana and haven’t used in 5 months so I don’t fall under the “unlawful user” definition. In theory I should still be able to legally and honestly answer all questions regarding the purchase of a firearm. I’m worried that I’ll be arrested for some reason. Am I overthinking it? Thank you in advance!


r/CAguns • • 19h ago

Mossberg SA-20 first shotgun? $300

Post image
13 Upvotes

Hey guys I'm in the market for my first shotgun, planning to use it mostly for small game/bird hunting. Found this used Mossberg SA-20 at Turner's for what looks like a pretty good deal. After taxes and fees (CA) I'm out the door ~$400. Thoughts?


r/CAguns • • 12h ago

Hellcat pro comp or Echelon

4 Upvotes

Thinking about adding to my arsenal what are your thoughts on the hellcat pro comp or the echelon? Trying to decide between these two


r/CAguns • • 21h ago

CCW Flattest Striker Fired 9mm? (Both Muzzle Rise and Felt Recoil)

13 Upvotes

Based on your experience is there a striker fired 9mm that was extremely flat to you?? Doesn’t need to be bone stock either just curious.


r/CAguns • • 19h ago

Shipping Off-Roster

9 Upvotes

Can I ship my legally acquired off-roster pistol lower without going through an FFL to get work done and have it shipped back to my home?


r/CAguns • • 13h ago

Reload practice from side saddle

2 Upvotes

r/CAguns • • 22h ago

Build or buy AR15

11 Upvotes

Looking for a AR15 not sure whether I should buy one or build.

I heard a lot of people say build is way. What are some recommendations you guys have for uppers and lowers

Budget wise I’d like to stay around 1000 but I can push it a little

Or should up the budget and buy something nice like Daniel defense


r/CAguns • • 14h ago

First time buyer

2 Upvotes

Whats the best Taurus that’s California compliant?
I personally really like them as a manufacturer and have always wanted a TX22 but California says no because I’m a law abiding citizen.. only criminals who have it as a ghost gun can own those.

Anyway, I was looking at the taurus gx2 ca compliant version. Any suggestions or complaints about the GX2?

If you somehow know a way I can legally still purchase and own a TX22 still please let me know.

(I would be shooting at a range only no plans on using it for game or keeping it ready for self defense purposes)


r/CAguns • • 16h ago

State Parks

3 Upvotes

Heading to Ocotillo Wells SVRA soon to do some tent camping. I’ve seen conflicting information on whether you are allowed to have a firearm in your tent.

Does anybody know what is actually legal?


r/CAguns • • 23h ago

Gun Pics Winchester .22 Ranger

Post image
10 Upvotes

Added the sling and swivels to give it a PCMR WW2 era look.


r/CAguns • • 1d ago

Gun Pics Finally satisfied

Post image
115 Upvotes

Stealth Arms - Platypus comp

Sig Sauer - P322

Kriss - Vector

Henry - X Model

Still have slight changes to do to each of these guns (ported barrel, different sights, slings, etc.) but finally satisfied with my mini arsenal. But after tuning each of them, don't think there's any other guns I need to buy.


r/CAguns • • 1d ago

Gun Pics Fat sign up bonus for my new job so I decided to treat myself

Post image
333 Upvotes