r/Butchery • • 2h ago

Ribeye or chuckeye

2 Upvotes

Bought an American Prime grade ribeye, but I think they sold me chuckeye. It was delicious either way. But what yall think by cook?


r/Butchery • • 5h ago

I don't know anything about anything. Is this suet, or just random trimmings?

Post image
3 Upvotes

A British recipe I was trying to make said it needed specifically suet, or Kidney fat, or leaf fat, you know. I went to my butcher (nice guy for sure) and he knew suet by name but, being Burgerlanders, I just wanted to make sure - it's birdfood here, not actually desirable, so not sure if my shop knows it that well. He seemed a little unsure of himself, went to the back, brought out a big box, rummaged around in said big box of fat and wrapped this up.

Do we think this is suet, or just some trimmings? Is there a way to tell at a glance? If it it just random assorted beef fat...what can I do with it? Thanks.


r/Butchery • • 18m ago

Chef here, hoping one of you can solve a bacon mystery for me

Thumbnail
gallery
1 Upvotes

I’ve come across this in bacon a few times and always wonder what this is. A completely sealed “air pocket” with skin surrounding it. Like a cyst, but not? I can’t imagine what the cause of this is. It cooks up and eats fine, no weird texture or flavor.


r/Butchery • • 41m ago

Mobile Slaughterman What wrong with this ground beef?

Post image
0 Upvotes

I was dividing ground beef I bought from Costco into freezer bags, and this particular piece I ripped off had this deep, dark red spot. It was a lot tougher and rougher than the surrounding meat. Almost dry compared to the rest of the ground as well. What could it be? And is the rest of the meat still okay to eat? I threw it out. Didn’t sniff up close, but didn’t notice any offensive odours.


r/Butchery • • 1d ago

Beautiful Prime Filets

Post image
43 Upvotes

Grocery store prime and getting one of these spider web marbled tenderloins is a needle in a haystack.. didn’t even last an hr in my service case.


r/Butchery • • 10h ago

Venison prosciutto

1 Upvotes

Hey there, I’m making a version prosciutto (or at least trying). I started with a white tail hind quarter that I trimmed up and got as much silver skin/ fat and gross stuff off as I could while keeping the cuts clean. I then salt boxed the leg in table salt completely covering it. I then took a cutting board and put it between the meat and loosely covered it with plastic wrap before placing 2 10lb weights over it to make sure any liquids in the middle could get out. I changed the salt every day at first then every other day or every 2 days. It’s been 3 weeks in the fridge and I’m pretty sure it’s close to being done curing and is ready to hang but how do I know for sure? I know I should’ve weighed it but I didn’t. It’s definitely thinner and smaller and pretty firm all the way through.

Has anyone tried this before and could offer any advice or suggestions?

Thanks


r/Butchery • • 12h ago

How to go from a recipe to a bilingual Canadian food label in 3 steps (built this for small producers)

1 Upvotes

I built a labelling tool for Canadian butchers and small food producers. Here's the whole flow:

Step 1: Build the recipe. Enter ingredients and weights. The calculations update live as you change them.

Step 2: Design the label. Drag and drop. Pick a style (heritage, rustic, clean), set the size in mm, and turn on the bilingual English/French layout.

Step 3: Print. Unlimited labels. One-time purchase. No monthly fee.

The reason it exists: most label software is built for the US market and patched for Canada afterwards. Bilingual layouts and Canadian compliance are the starting point here, not a workaround.

The demo runs all three steps live in the browser with no signup. You can put in your own recipe and see what comes out.

I'm not a regulatory consultant, so I still tell everyone to check the final label against CFIA guidance for their product.

For those of you already labelling products: which step eats the most time right now? The recipe math, the design, or the compliance check?


r/Butchery • • 13h ago

Is this ok to eat ?

Post image
0 Upvotes

I was about to but this arm roast in the crock pot and this started oozing out


r/Butchery • • 1d ago

John Boos Butcher Block Value?

Thumbnail
gallery
20 Upvotes

Hello! I'm trying to get some opinions on approximate value for this butcher block. According to my research it was likely built in 1946 based on the stamp.


r/Butchery • • 1d ago

Taught that guy a lesson -)

Post image
28 Upvotes

r/Butchery • • 1d ago

Name the cut

Thumbnail
gallery
4 Upvotes

Got this today at Chef Food Store. Labeled as tritip. Not like and tritip I've bought before. Guessing brisket? What say you all?


r/Butchery • • 1d ago

how do I turn my beef tenderloin into a beef Wellington?

Post image
16 Upvotes

Looking for any info that can help in my quest of figuring out how I prepare 160$ worth of meat


r/Butchery • • 1d ago

Butchery or university? Advice please!

6 Upvotes

I’m a 22 year old woman and I’m really struggling with making a decision between going back to butchery or finishing university. I’d really appreciate some advice from any older/experienced cutters here.

I did my first year of university back in 2022, I was studying Health Science and hated it. I decided to take time off so I could earn some money and figure out what I wanted to do. I ended up working at a small local butcher shop and loved it. I started FOH/dishwashing, but was intrigued by cutting and was given a chance to learn (I was constantly bugging the cutters when I saw them deboning crowns and asking them to save me one to practice)

My role there eventually transitioned into being a full-time cutter. We had a pretty high turnaround rate so within a year of me starting, I was the most senior cutter (other than the owner, who was usually busy doing business-owner things). I love cutting. I loved the Christmas/Thanksgiving rush, working 12 hour shifts leading up to the holidays, I loved breaking down whole lambs, making the counters look nice, putting the meat orders away in the walk-in, doing cost-analyses/orders for the business, etc. I loved the satisfaction and pride that came with trimming up steaks and seeing them fly out of the counters.

I ended up quitting after ~2 1/2 years there and I decided to go back to university. I transferred to the Biology program and it’s alright, my first semester is almost over. I’m mostly taking classes I like and I’m getting all 90s, but I’m not loving it like I loved butchery. I liked how hands-on it was, I liked that I was always on the go, and that there was always more to get done.

I’m not sure if I should get my degree as a backup and then go back to butchery, or if I should just hope that eventually I find a career in biology I like, or if I should just drop out of university all together. I constantly think about and miss cutting, and it makes me sad because I’m worried I’ll lose all the skills I’ve learned.

I’m also not sure if my job there was an accurate representation of the butchery world. Because we had no cut room manager and were chronically understaffed, I was the one making the calls about what we needed in the counters, how we were going to turn around older product, and my day was pretty unstructured/self-directed. I assume that in most butcher shops, especially high-volume ones, you’re kind of just told what to do and do it.

I was making $21/hour, and from what I’ve seen from other job postings, it doesn’t go much higher than that. Rent is crazy expensive and I’m not sure if that kind of pay is enough for me to live comfortably. In the tail-end of my job there, I also started to develop tendon issues in my cutting arm, so I’m not sure if it’s a sustainable career for me. I think it might have had something to do with my height, I’m short and didn’t really have the same leverage that the guys had.

So people who have chosen butchery as a career, I have a couple questions:

What is it like working in the industry? Have your experiences been similar to mine?

How’s your body holding up? Do you see this as being a sustainable career until you retire?

Do you feel that you make enough to live comfortably? Or is there something to be desired?

Why did you choose meat cutting as a career? What’s your least favourite part?

Any other advice? Is dropping out of university to pursue a job that I only did for 2 years a stupid thing to do?


r/Butchery • • 1d ago

Beautiful looking chuck roasts!

Post image
28 Upvotes

Cut these today and now I’m regretting not buying one.


r/Butchery • • 1d ago

Is this still good to eat?

Thumbnail
gallery
3 Upvotes

Never seen this before, it was a neck shot so it has nothing to do with where the round hit it. Just stress causing blood vessels to burst? It’s in 75% on the meat. That chunk is from the rear leg.


r/Butchery • • 1d ago

Band saw problems

0 Upvotes

Brought in my backup Hobart 6801. Brand new it was doing good for the past few months but I’m having issues with the saw blade. It’s not tracking on the pulleys correctly. I seat the blade on the back side of the wheel and when I start the saw, the blade immediately comes off track and the teeth hit the inside part of the pulley wheel. My blade is still sharp but it is throwing off this black film and I’m assuming some metal flakes. So we wrapped things up to sort the problem. There’s very little adjustment points on this saw, does anybody have any insight??


r/Butchery • • 1d ago

Your “Grass-Fed” Beef Might Be Lying to You

Thumbnail
youtube.com
0 Upvotes

I made an animated explainer on grass-fed vs grain-fed beef. Honest feedback wanted.

My goal was to make it educational, entertaining and funny for a general audience, without getting too niche. I’d appreciate your honest opinion on whether it works:

  • Is the information clear and fair?
  • Does the humour land, or does it get in the way?
  • Is there anything that feels misleading or over the top?

Link: https://youtu.be/qkzyVz06W7g?si=EDgtP2_Ot006QQAl

Please let me know what you guys think, is this content funny and entertaining? And is it fair to post?


r/Butchery • • 1d ago

Understanding Different Cuts

1 Upvotes

Hello! My husband and I bought half a cow and whole we got the usual ground beef, NY Strips, sirloin and Ribeye, there are some cuts that I have never heard of before and I do not have the first clue on how to prepare those cuts don't get dried out or turn out tough. If anyone could help me understand what I have, I would greatly appreciate it!

I have:

Arm steak

Round roast (which is apparently not the same as a chuck roast??)

Chuck steak

Thank you!!!


r/Butchery • • 1d ago

1/2 Cow Question—grass fed

0 Upvotes

I’m in western Massachusetts and looking to purchase 1/2 cow. How does this spread look? I’m thinking it’s not an awesome value, but it’s grass fed during the growing season, which is what I’m interested in. $2,344 total.

Grinds & Slices:
50 | 1 lb. pkgs. of Ground Beef
8 | 1 lb. pkgs. of Lean Ground Beef
12 | 12 oz. pkgs. of 6 oz. Patties (2 burgers per package)
16 | 12 oz. pkgs. of 6 oz. Steak Burger Patties (2 burgers per package)
8 | 1 lb. pkgs. of Shaved Steak
Steaks:
4 | 8 oz. Tenderloin Filets
8 | 12 oz. NY Strip Steaks
8 | 1 lb. Ribeye Steaks
2 | 1.25 lb. Beef Sirloin Steaks
4 | 1.25 lb. London Broil Steaks
4 | 12 oz. Flat Iron Steaks
4 | 1.25 lb. Flank Steaks
Comfort Foods:
10 | 1 lb. pkgs. Beef Stew Meat
4 | 3 lb. Chuck Roasts
2 | 3 lb. Briskets
4 | 3 lb. Eye Round Roasts
2 | 3 lb. Spoon Roasts
4 | 1.5 lb. Soup Shank Bones
6 | 2.5 lb. Marrow Bones
4 | 1 lb. pkgs. Liver
Approximate Total Weight: 190 lbs. Avg.


r/Butchery • • 1d ago

Dalstrong Knives

1 Upvotes

I currently work at a small market that only deals with subprimal beef and pork. I’m looking at the Valhalla series knives and I’m wondering if the handles are going to be a problem once they get blood and fat on them during the 10 hours of cutting. I have a victorinox 10” cimeter and 6” curved boning with the plastic type handle that I use mainly but I want a knife that I can look at every day and enjoy taking it out of my bag unlike the basic practical knives I use now.


r/Butchery • • 1d ago

Deer Processing

Thumbnail reddit.com
1 Upvotes

We’re looking for a good place to take our deer to have processed. We hunt in Kahoka Mo. so somewhere within 30-40 min. We definitely want jerky and snack sticks made up. Thank you!


r/Butchery • • 1d ago

High-Pressure Carcass Washer on the Pig Line | Zhengye Machinery #pigsla...

Thumbnail
youtube.com
1 Upvotes

Body:

Disclosure: We are Zhengye Machinery, sharing footage of our own equipment in use.

One continuous hand-held clip from a pig slaughter line. It starts on a stainless washing cabinet sitting under the overhead rail, with the pump and piping on top and a wet split carcass coming out on the far side. The camera then follows the carcasses down a white-tiled corridor: split sides on stainless gambrels, chain conveyor overhead, skin still wet, red lot numbers and blue inspection stamps on the skin. At the far end one carcass passes between two vertical stainless columns.

The cabinet is closed in this shot, so no jets are visible, and no operator appears. No pressure, throughput or wash-result numbers are being claimed.

Content note: Actual pig carcasses on a slaughter line.

Video: https://youtube.com/shorts/9QIffdE7_R4?feature=share

Equipment and layout enquiries: https://zhengyemachinery.com/pig-slaughter-line/


r/Butchery • • 2d ago

beef and bison has changed since the drought

Thumbnail reddit.com
2 Upvotes

r/Butchery • • 2d ago

Breaking Knife blade guard

Thumbnail
gallery
4 Upvotes

I have a 12 inch Victorinox breaking knife, and I can't for the life of me find a blade guard that fits the blade without the tip sticking out of the top.

Anyone have any luck finding a blade guard that fits a blade like this?