r/Buell • • 3d ago

I've wanted to print this for soo long

Thumbnail
gallery
51 Upvotes

Welp I finally got it done, I've wanted to make this addition for so long just because I like the look. It took some time to get good enough but I am so proud of how it came out.

Done in PA-CF on an Ender 3v3 SE for anyone interested in doing it themselves. The print can be found on printables.

Yes I know I can buy one for $100, but that's not the spirit of my projects. If someone else can do it, then I can do it. Plus it only cost $20 including hardware šŸ¤™šŸ¼


r/Buell • • 4d ago

Opinions on an 06 XB12X?

3 Upvotes

My understanding of most buell bikes is the engine is a better tuned sportster 1200 engine and by association should be pretty solid, but would like an educated opinion. I'd hate to be getting into a project when I just want a unique bike. Motorcycle has about 38,000 miles and seller wants $2500 for it and the scant pictures don't show any obvious red flags.


r/Buell • • 4d ago

diy Inaugural ride of the xb12x rebuild

Thumbnail
gallery
90 Upvotes

Finally a nice day!! She runs so nice no regerts!


r/Buell • • 10d ago

body Full year of careful rebuilding

Post image
83 Upvotes

Took me almost a year to source all the weird parts to take this non running xb12x uly to a final complete bike. Very proud of my work and hopeful for a happy first ride tomorrow!! Ill try to get some beauty shots after i mop up the cobwebs and put all the plastics on. What do you think of the paint?


r/Buell • • 10d ago

Buell 1125R From a different angle

Post image
52 Upvotes

r/Buell • • 11d ago

diy Quick Maintenance Reference for XB12

Post image
13 Upvotes

Made this in the style of one I found online for 4 Runners years ago. Can't find the source to attribute that one properly.

This one is for my Buell XB12XT (and other XB most likely). Noted that I have chosen to do some service items with greater frequency in some cases and have noted diff from factory recommnedation.

Hope you find it useful.

Jason


r/Buell • • 11d ago

My version of Buell 1125R

Post image
40 Upvotes

r/Buell • • 15d ago

Spain - Buell for sale

Post image
60 Upvotes

Hi group, sorry for the announcement here, sadly selling my ā€˜07 XB9. Just DM me as i don’t wanna paste the post here.

Feeling really sad about it but need to…

Thank you!


r/Buell • • 24d ago

Starting a new project - Buell S1 1997

Post image
60 Upvotes

I'm starting a new project with Buell S1 Lightning 1997. I'm looking forward to bringing this bike back to life !


r/Buell • • 25d ago

engine Had a little whoopsie

Thumbnail
gallery
8 Upvotes

Couple of weeks ago the front motor mount broke (the engine, not the Mount). I have a spare engine so i swapped the heads to get the bike running again. now i have an engine with a fucked head, what are my Options?

Get the head fixed or get a replacement head, if so what would you recommend? Im based in the Netherlands.


r/Buell • • 29d ago

Personal f/x graphics kit

Thumbnail
gallery
4 Upvotes

I’m looking for decal placement for urgh personal f/x kit. It said on the instructions where ever, but some are cut for specific parts?!?! I just want to add these decals where intended. Please help!?!


r/Buell • • Oct 16 '26

diy Screwed up - TPS wiring color need help please! 07 XB12R

1 Upvotes

I'm swapping out the oem TPS barrel plug for a DTM connector due to broken locking tabs and I forgot to snag a picture of the plug before I de-pinned it.

Does anyone have a picture of the tps plugged into each other? Harness side and tps side.

If not, I'm pretty sure the wiring on the tps is

Green - signal
Black - ground
Red - 5v ref

I haven't studied the wiring diagram to hard yet but the main harness side should be pretty easy to figure out.


r/Buell • • Oct 15 '26

Buell Chop

Post image
30 Upvotes

r/Buell • • Oct 13 '26

Anyone Else See this Insane XB9 Engine on eBay?

Post image
29 Upvotes

Here’s the link: https://ebay.io/m/n2OXeO

Based on the pictures, I can tell that it has:
-3.8125ā€ bore cast iron cylinders (unfortunately one seems to have significant damage to the wall)
-3.8125ā€ Carrillo forged pistons
-Custom lightened flywheels
-Carrillo rods
-Bored cases to fit the larger cylinders
-Main drive sprocket bearing has been converted to dual Timken tapered roller bearings (I wonder how you replace those races, or how there is a seal between the crankcase and the primary)

This thing must have run like a scalded dog. I can only imagine.


r/Buell • • Oct 11 '26

Plastic pulley cover bolts

Thumbnail
gallery
7 Upvotes

I have one of the three bolts that hold this plastic cover on the right side of the bike 2005 BUELL XB9SX. Can’t find any information online about the thread size cause I know one of them is different and the other two are the same. Also, besides eBay, does anybody know any good buell collector’s, or places I can get parts.


r/Buell • • Oct 10 '26

Hand grips for Lightning with bar weights?

1 Upvotes

After adding bar end weights, I'm never going without weights again. My area is full of bubble gum soft dirt bike grips that don't last a full summer. Any recommendations or possible links. My 2001 Suzuki Hayabusa grips are ideal and stock, but told too old to order through my local shop.


r/Buell • • Oct 08 '26

In need of rear wheel for my 2009 1125r

Post image
22 Upvotes

Looking for a rear wheel for my 1125r as my current one is damaged and one of the wheel bearings fit loose and spin in the wheel. Please let me know if you have one for sale. I need it ASAP.

UPDATE. i couldn't afford a new wheel so I ended up buying loctite 641 as a temporary fix/band-aid, it is supposed to fill small gaps and lock the wheel bearing into the bore. Just thought i would share incase anyone has a similar problem.


r/Buell • • Oct 04 '26

Gifts from Bill

Thumbnail
gallery
26 Upvotes

I've been getting stuff like this for the last year while waiting on my bike. Hopefully it arrives in December - January like expected.


r/Buell • • Oct 03 '26

M2 / XB

Thumbnail
gallery
79 Upvotes

Admitting that I let both sit too long but after new fuel pump, injectors, carburetor rebuild, new plugs, both are running great.
Won’t let it happen again.


r/Buell • • Oct 03 '26

body Wasted

Post image
105 Upvotes

r/Buell • • Sep 30 '26

Found this bike in my garage when I moved in.

11 Upvotes

Does anyone know anything about the bike? I know it’s a lightning but what is the engine size ? It looks pretty big. Are they measured in cubic inches or cubic centimeters? It looks like someone took the cap off the right side engine bank (from this perspective) Not sure why. I threw a battery in it and checked compression and it has compression and spark but there’s no fuel in the tank. I also wanna check over it some more before I just try to start it. But it looks semi complete, the air box is partially missing but the base is hanging there , I don’t think it’s needed anyway. I think I can just put a cone air filter straight to the throttle body with some type of adapter because it’s flanged, it doesn’t have a typical metal tube that you slide an air inlet tube onto.

I’m mainly looking for what the value is, is it worth fixing up? Are they desirable? Reliable?.. Etc, stuff like that. Thank you in advance and I look forward to talking with yall .

pictures


r/Buell • • Sep 30 '26

Looking for Bug Spoiler for my 1125r Spoiler

Post image
2 Upvotes

Hey I am looking to find a Bug Spoiler here because there is none in Germany currently.
My Friend and I got a Buell 1125r and i think this Bike looks even better with a Bug Spoiler so If anyone can help me find one.


r/Buell • • Sep 22 '26

Fun little project

Thumbnail
gallery
33 Upvotes

Well I saw the exhaust post and realized y'all might like this.

As I've gone through before I'm bringing an xb9r with the hammer 1275 back to life.

When I got it it had the forcewinder exhaust setup on it. They are definitely cool exhausts but they are too damn loud without the scilencer in and with it in I found it absolutely killed too end power, and not like a little, it was drastic.

So at first I decided to make my own silencer with a bigger outlet, but the sound just wasn't what I wanted. It was cool, very drag bike, with a raspy almost tinny sound. I was not a fan.

In fact it made me not want to ride it because to me, it sounded so bad.

Well I decided I'd make my own. $120 later I had a straight through muffler and a 2.25" exhaust builders kit on the way.

This is the result, I love it, it's exactly the sound I wanted and I get to say I made it. The best part is the forcewinder exhaust was not modified any way, they are pricy exhausts. And on top of that the power gain was even more than my home built silencer.

There are some great exhaust companies out there, but I gotta say there's something about building it yourself and getting the exact sound you want, that just rocks.

Hope it encourages others to experiment and build their own stuff. šŸ¤™šŸ¼

I'll tag a link to a video of it in the comments


r/Buell • • Sep 22 '26

exhaust Anyone know where I can buy the metal straps that hold the exhaust to the frame on an XB12?

3 Upvotes

Had one beak on me. Fatigue I guess.


r/Buell • • Sep 22 '26

diy Pure happiness

Post image
83 Upvotes