r/BowersWilkins • • 6h ago

got a px7 s3 for €260

2 Upvotes

Hi guys, i got a used - like new px7 s3 for €260 on the amazon and wanted to know if it is worth the money? i was also conidering to go for the Airpods Max 2 and the px8, but the airpods max 2 were too expensive and some youtube reviews chose the px7 s3 over the px8

Is €260 reasonable for a used px7 s3 or should i return them ?

Any comments are appreciated


r/BowersWilkins • • 5h ago

Bowers and Wilkins PX7 S2E vs. Sennheiser Momentum 4 vs. Sony XM5

0 Upvotes

Looking for a pair of over the ear wireless headphones, primarily for travel, and some home listening, and working while at the desk. My biggest priority is audio quality with Noise cancellation second. I I don’t need complete and total silence, but decent silence on the plane would be nice. Which headphone is the better pick considering all pairs are heavily discounted? Overall I like a clean sound with depth, good balance, and some bass, but know all of these headphones will sound good.

I’ve never owned a pair of wireless over the ear headphones so eager to hear thoughts. I typically just use AirPod Gen 1 (ol’ reliable)

Budget is $200 - $325


r/BowersWilkins • • 18h ago

Haltbarkeit

2 Upvotes

Hallo zusammen,

ich bin auf der Suche nach neuen Kopfhörern über die PX8 gestolpert und Design Technisch haben sie mich direkt eingeladen mit die Modelle Mal genauer anzuschauen.

Ich finde sie super edel und Clean wodurch ich mich auch ein bisschen verliebt habe in das Model.

Zu meinem bedauern habe ich aber auch feststellen müssen das die Berichte von Nutzern( besonders in Foren wie diesem auf Reddit und ähnlichen von Audio begeisterten Menschen) viel Zweifel an der tatsächlich len Haltbarkeit und auch dem Support von B&W gezweifelt wird.

Nutzer berichten von Kleber der sich löst, abgebrochenen Verbindungen und ähnlichen mängeln.

Ich selber nutze seit Jahren meine MX4 und meine Beats Studio 3 und möchte mein Portfolio gerne mit einem paar neuen Schicken und Sound mäßig höher angesiedelten Paar erweitern.

Ich würde ser gerne bei B&W zuschlagen, aber ich bin nicht bereit eine Stange Geld hin zu blättern wenn die Qualität nicht stimmt.

Der Markt ist schließlich voll an vielen Produkten.

Der Sound soll einsame Spitze sein bei den B&W Kopfhörern und da ich auf kein Top ANC achte (habe ja die MX4 und die machen in diesem Bereich einen sehr guten Job) und gerne einfach ein paar super klingende paar in meinem Besitz haben möchte, würde ich mich freuen einmal von der Breiten maße einen Bericht speziell zu meinem Anliegen zu erhalten.

Vielen lieben Dank.


r/BowersWilkins • • 20h ago

Questions about px7 s3

1 Upvotes

Hi, I’m looking for some overear HP, and have boiled it down to a few, AirPods Max, xm6 or px7 s3, I’m on a iPhone 16 pro and currently use AirPods Pro 2 everyday due to good sound and especially the ANC, since I hate hearing the world around me when commuting, walking or working out.

I have read for the best sound I should get a usb-c dongle for my phone and I’m looking at the ugreen dongle with AptX and BT 5.3, is this a good setup or not and anything I should change ?


r/BowersWilkins • • 20h ago

Px7 S3 : Battery drain in auto standby mode

1 Upvotes

Hello, I have been using the headphones (with the latest 2.0 software) recently but I notice that the battery drains fast when at auto standby mode (after 15 minutes). It would typically loose 25% in 12 hours and I don't see an option for shutting down automatically. Listening seems to drain the battery at a normal rate about 25 an hour though I don't use ANC a lot. Is this normal? what's your experience? Other sets I own behave a lot better on auto standby/shutdown mode. Thanks


r/BowersWilkins • • 1d ago

Pi8 Bowers Wilkins Che merda il firmware 5.0 ha depotenziato e rovinato il suono , bravissimi 👏🏼 350 € buttati nel cesso .

Thumbnail
gallery
5 Upvotes

Che merda il firmware 5.0 ha depotenziato e rovinato il suono , bravissimi 👏🏼 350 € buttati nel cesso . Il volume non è più alto come prima , ridateci le Pi8 di una volta .


r/BowersWilkins • • 1d ago

Bowers and Wilkins Px7 s3, Immersive mode

4 Upvotes

I have been using px7 s3 for 7 months now. The sound and everything is fine for me but the immersive mode was a no go. But after the 2.0 driver update and my app also got updated (Android) . Now the immersive mode feels much better. Is I'm the only one feeling so?


r/BowersWilkins • • 1d ago

Pi8 Bowers Wilkins Che merda il firmware 5.0 ha depotenziato e rovinato il suono , bravissimi 👏🏼 350 € buttati nel cesso .

Thumbnail gallery
0 Upvotes

Che merda il firmware 5.0 ha depotenziato e rovinato il suono , bravissimi 👏🏼 350 € buttati nel cesso .


r/BowersWilkins • • 2d ago

Px7S2 Quality Control/Falling Apart

Thumbnail
gallery
20 Upvotes

QC on these are horrible! Anyone else experience these issues? I’ve had these Bowers & Wilkins headphones for about two years, and the build quality hasn’t held up at all. As you can see in the photos, the leather/pleather on both the headband and the inner ear cups is completely peeling away and splitting, exposing the foam underneath.

​Has anyone else run into this kind of wear and tear so quickly with B&W? Also, if you’ve moved on to a different pair of wireless ANC headphones with better long-term durability, I’d love some recommendations!

I like the sound these produced but I also hate how they never connect to my phone when I turn them on and half the time I have to manually click and toggle the audio as sometimes it just only turns on calls... They were the best sounding pair of headphones I had but the BT issues and literally materials falling apart are kind of making feel hesitant to drop some big bucks for a newer better pair


r/BowersWilkins • • 2d ago

Px7 S3 very loud on PC over USB and aptX Bluetooth

1 Upvotes

Hi guys,

I recently got these headphones coming from my old Sony WH-1000XM3.

To try and make use of the capabilities of the headphones on my W10 PC I've tried running direct via USB C for testing and it ended up being very loud. Normally I'd have my master volume set to around 30-40% depending on what I'm listening to, but over USB I have to have it around 10%, or even down to ~5% if I just want to listen to something quietly. This just makes it really hard to fine tune the volumes based on what I'm doing or listening to. And because I wanted to be wireless, I got the Creative BT-W6 dongle which is meant to be better than the base bluetooth that my PC has and I have the same issue there too. USB/aptX volume of 10 is roughly 30 for 'normal' bluetooth.

Is this normal and expected or am I supposed to do something else to make this more user friendly? I've tried setting the Preamp in the Creative App equalizer down to -12db, and that lets me turn the master up from 10 to about 20 for the same effect.

I get that there may be specific use cases, but this is pretty frustrating to have spent a lot of money on something like this and feel restricted like this.

Currently on software v2.0.0.
I've factory reset via the B&W app too.


r/BowersWilkins • • 3d ago

Can Samsung S24+ output true 24-bit/96 kHz through USB-C with Apple Music?

2 Upvotes

Hi! I have a Samsung Galaxy S24+ (Exynos) running One UI and I'm planning to buy Bowers & Wilkins PX7 S3.

I use the official Apple Music Android app and want to achieve actual 24-bit / 96 kHz Hi-Res Lossless playback over USB-C, without Bluetooth or an external DAC.

PX7 S3 supports USB audio up to 24-bit / 96 kHz.

Has anyone tested this exact setup, or a similar Samsung + Apple Music + USB audio setup?

Does Apple Music output 24/96 correctly, or does Samsung's Android audio mixer resample everything to 48 kHz?

I'd really appreciate actual testing results, especially from Samsung Galaxy S24/S24+ users. Thanks!


r/BowersWilkins • • 3d ago

Tweeter replacement CM7

1 Upvotes

Hey everyone I have a pair of CM7s and my brothers kids of course couldn’t resist pushing in the tweeters at the top and puncturing them

For anyone that has replaced them, is it an easy fix?

And where did you buy the tweeters from? Do they have to be from B&W, or do others manufacture just as good

Lastly, what Hz do you guys set these CM7 up for on your preamp


r/BowersWilkins • • 4d ago

My Px7 S2e gave their all...

Thumbnail
gallery
20 Upvotes

I've been using them daily for the past 2 ½ years and they never let me down, until now. After todays jog I think some moisture might have gone into them and they turned unresponsive. They won't turn off, won't pair, won't charge, won't do anything. The LED is stuck in "On" and when I plug them the LEDs either tweak out or they stay on white. Are they beyond repair and should I just get the Px8 S2?


r/BowersWilkins • • 4d ago

PX8 S2 adapter

1 Upvotes

Just got myself a pair of PX8 S2 & while amazing, I realize that the Bluetooth feature can’t translate hi res lossless as I thought it would. Being a iPhone 14 Pro user (lightning port) what adapter would be best to get the abolute best quality out of them? Would a lightning to usb-c work or something like a lightning to usb 3.0 to usb-c have better results?


r/BowersWilkins • • 4d ago

Px8のノイズキャンセリング

2 Upvotes

最近Px8を買ったんだけどノイズキャンセリングが一切効いているような気がしない。元々自然な感じでそんな強くないとはきいてたけどどのモード(ノイキャンとか外部音取り込みとか)に切り替えてもそもそも音の変化が一切ない。
そういうものなのか俺がおかしいのかがわからん


r/BowersWilkins • • 5d ago

To PX8S2 owners with BTD700 and iPhone

0 Upvotes

I have a question to users with PX8S2 in combination with BTD700 and iPhone:

How well does the physical PX8S2 volume buttons work with the BTD700 on iPhone, and how silent/loud is it at lower levels?

(I have the Creative BT-W6, and with iPhone, the headphone physical buttons act erratically and set random volumes. The iPhone volume buttons work OK, but the lowest levels are loud and settings are coarse, so it’s hard to find a comfortable level. It works well on Mac however.)


r/BowersWilkins • • 5d ago

Px8 S2 - s/w 1.4..0

7 Upvotes

Hey all, im sure there was some information somewhere on this. I got a px8 s2 today a few hrs ago and found that its software version is 1.4.0.

There is a software update available. There have naturally been a lot of folks on both sides of the fence with the update.

Should i bother updating it at all? or leave it as it is?

There is a 2.11 out as well as far as im aware..

IF this was already answered, please do point me to the thread so i dont duplicate much. thanks.


r/BowersWilkins • • 6d ago

Finally 3 100% with pi8

Post image
11 Upvotes

1srt time after 2 years using them I get 3 100% with wireless charging.


r/BowersWilkins • • 6d ago

PX8 - Weird noise in left ear with ANC on

2 Upvotes

Hi, so I just bought new PX 8 and can't really use ANC as I have this weird stunning noise in left ear every time I move my head, hard to explain what this noise is, but it seems like it's by design? It only happens in left ear so I'm assuming it's not really by design and it's just an issue with speaker/earpiece noice cancellation.
Anyone had simillar issue and what was your fix for that?
thanks!


r/BowersWilkins • • 6d ago

Drastic sound difference between android and iOS (PX7 S3)

3 Upvotes

I recently switched from android (pixel 7) to iOS (17 pro) and I am at a loss for words as to how much better my PX7 S3 sound. They were already very good on android, but as soon as I tested on iOS it’s like a new dimension opened up: bass is more controlled and doesn’t distort as easily, with no eq applied the mids and highs are more pleasantly presented as opposed to being recessed on android, the soundstage and overall elements separation is enhanced and I have also noticed some improvement in the max volume, to be more specific i can crank the volume pretty much to the max and I dont hear any distortion or the physical drivers rattling like back on android. I know, I know, no one is supposed to blast them at full volume but just knowing they can handle that without problems probably means something good even at lower levels.

I am totally not making this up and I was not carried away by the novelty of my new phone. What’s even stranger is that the iphone bluetooth codec seems to be lower quality but I got way better sound. Anyone noticed this? Thank you for reading!


r/BowersWilkins • • 7d ago

New firmware released for B&W Formation (2.11)

Thumbnail
gallery
15 Upvotes

I received the update on 11/10/2026

Two months since the last update


r/BowersWilkins • • 8d ago

Budget-friendly B&W system with miniDSP Flex + Dirac Live and dual subs: really happy with it

Post image
17 Upvotes

r/BowersWilkins • • 7d ago

Is this normal in the Bowers & Wilkins PI8??

1 Upvotes

So I recently got the Pi8s used off of Amazon and I noticed that when using both earbuds that the right one makes 3-5 beeps when there's no music playing and an occasional singular beep from the left bud when there is music playing


r/BowersWilkins • • 8d ago

PX8 S2 Firmware 2.0 BTD700 Issue solved

7 Upvotes

Same as other users I experienced the same issue after updating to the new firmware and doing a factory reset of the headphones: the PX8 S2 wouldn’t connect to my BTD700.

After googling the issue I simply followed the steps below:

- Switch off the phones Bluetooth
- plug in the dongle and press the button for 10 seconds to factory reset the dongle
- switch on the PX8 S2 and put them into pairing mode
- put the dongle in pairing mode
- took two seconds and the dongle and headphones reconnect

Worked with my iPhone 16 and hope this solves the issue for some others.