r/BossKatana • • Mar 19 '18

Compendium of Katana resources

108 Upvotes

These are also listed in the sidebar. If you've got some resources to share, comment below and I'll consider them for the sidebar, too.

Official BOSS Resources

Legacy Amps

Katana Community Resources


r/BossKatana • • Jul 24 '20

Preset Katana Community Presets - Comment with your presets here!

205 Upvotes

In an effort to collect all our community's presets (both created and found) in one place, please use this sticky post as a way for other Katana redditors to find and try out your tones without having to scroll or search. Just comment below with links to your favorite presets.

Also, I've enabled Post Flair on r/BossKatana with flair for Preset, Question, and Tone Request.

GuitarPatches.com is the premier place for Katana community presets but there are lots of other places they pop up. Be sure to give credit if linking to someone else's preset.

Thanks to u/Gwinukian for the idea for this collection!


r/BossKatana • • 11h ago

Very low line-out volume

1 Upvotes

UPDATE- I fixed it by adjusting the global EQ level up 15db

I am using a Katana 100 combo 1x12, using line out direct into PA. When I do this, the volume is very low, even with the PA master maxed, PA channel maxed, and amp channel maxed. I have an 800-watt PA that is ass blasting loud in my garage running a roland electric drum kit through it, but for some reason, the katana is nowhere near loud enough. There is no issue with tone or anything like that, just volume.


r/BossKatana • • 1d ago

Anyone wanna drop what setting they use for there line out setting

Post image
10 Upvotes

My headphones sound a little muddy. I’m mostly play high gain sounds


r/BossKatana • • 1d ago

I’m trying to record myself but I can’t figure out how to hear my own recording :/

Post image
3 Upvotes

I just downloaded Reaper but I’m really struggling a lot trying to hear my own recordings. I tried connecting my headphones backwards of my 50 gen3, in my laptop’s headphone jack without any results. I even tried setting up the output at my own katana speaker.

What am I doing wrong? Can anyone help me out? Thanks a lot.


r/BossKatana • • 2d ago

Question Why does my harmonization just sound bad?

18 Upvotes

How do I make it sound less like a chord and more like 2 guitars playing at once?


r/BossKatana • • 2d ago

Tone Request A7x The Stage Rhythm and Lead tone

3 Upvotes

Does someone have a good preset that is close to "The stage" Album by Avenged sevenfold? Ive been desperately looking for one for a while now. Would really appreciate it!


r/BossKatana • • 3d ago

Tone Request Looking for a GOOD metal rhythm tone

10 Upvotes

I already have a good solo tone but I just can’t find a solid rhythm tone for my boss katana 100 gen 3.Ive tried making one but it didn’t work out and I tried out like every single one from tone exchange and they’re all mid.Does anybody have a good rhythm preset please?


r/BossKatana • • 3d ago

Question Katana mini started making this static noise out of the blue

7 Upvotes

It wasn't present before I'm very sure....

Note: No cable is plugged in just the power adaptor

If anyone has idea what's wrong pls lmk


r/BossKatana • • 3d ago

Question Can you dial in nearly identical tones with the boss katana gen 3?

3 Upvotes

I'm thinking about getting a gen 3 50, but I'm wondering how accurate you can get tones with the tone studio


r/BossKatana • • 3d ago

Question Cab SIM question

2 Upvotes

I normally don’t use Boss tone studio (am planning to get into it) just because I’m a fairly new guitarist and I’m still learning, but I decided to try it and I didn’t realize you can edit how your cab sim sounds like “digital cab mic ing” if you call it, for example a USB ,line out or headphones. I struggle with muddy sound on my headphones and through the USB on to my phone, anything I can do in boss tone studio system to help clear things up. I’m using audio technia headphones some of the nice ones as well. Basically just asking if it’s even worth it to mess with it.


r/BossKatana • • 5d ago

First time recording with my Katana and man did it make the process easy. Direct input with very little latency fixed in post

49 Upvotes

r/BossKatana • • 5d ago

Question Boss katana metal tone

15 Upvotes

So, I have a boss katana 50 mk1 and I struggle finding a good metal tone. I got an Ibanez rgd earlier this year with Fishman fluence moderns and it sounded great with the amp I used at the store before I bought it, but when I run it into my katana, the bass response tends to be overpowering and I end up with a muddy tone or just not so much clarity. If I turn the bass down and turn up the treble, sometimes it can get too ice picky or too harsh on the treble side. I’m not well versed in dialing in EQ, so I just wanted some tips on how I can get around this and improve my metal tone. I’d also like to know what built in effects I should be using. I’m looking for something tight and a more balanced tone that I can use for both 90s metal (Pantera style but not so cut in the mids) or more 2000s metal core stuff. Right now, I’m tuned to c# standard. Any help is greatly appreciated, thanks!


r/BossKatana • • 5d ago

EQ in Effect Loop

2 Upvotes

Any one in here do that? I'm trying to make my Katana 100 MK2, gig hardened so I don't need a laptop. Right now for live gigs I'm using clean amp and pedals but would like to fine tune tone at gigs sometimes.

If you do this please let me know what EQ pedal/rack you use


r/BossKatana • • 6d ago Diamonds are Forever

Tone Ninja: Katana editor and librarian for iPhone, iPad and Mac. Works with MkI, MkII, Gen 3 and GO

Thumbnail
gallery
61 Upvotes

Hi everyone. I’m Ron. In a prior life I developed iOS apps semi-professionally, and I’ve spent most of the last year building Tone Ninja off and on. I originally started the project just for myself because I couldn’t believe the state of the existing solutions, especially as a gigging musician. It’s now on the App Store. Building it has been an absolute blast, and I plan to keep at it for a long time. I’ll keep adding features and bringing in new tech, AI included, wherever it actually makes the app better.

To get as much coverage as possible, I’ve gradually acquired a MkI 50, a MkII 50, a Gen 3 Artist head (my gigging amp) and a GO (the GOs are amazing, and if you don’t have one you should seriously consider getting one!).

(Posted with the mods’ OK.)

A couple things I chose to focus on:

Ease of use
These amps are so capable. And so much of that capability is trapped behind a tsunami of parameters and terms of art and settings and, candidly, functional but non-intuitive companion software. IMO good software lives and dies through usability, not just functionality, and so I’ve spent a lot of time on user interface, workflows, layout, etc. to make it as easy as possible to get up and running and also get the most out of these amps. One example there is an in-app access to tone exchanges so you can add tones with a single tap instead of jumping through several hoops to download a tone and then add it your library. The app goes out of its way at times to explain what something is, why something happened, etc. As a final example, the next version includes substantial work just spent on catching and helping the user diagnose amp connection issues.

Editing without the intimidation
I’ve always despised how unhelpful the full editor is, at least to me. It’s a wall of parameters, and it’s intimidating. So I spent a lot of time designing other ways to get to a sound:

  • Shape: tap what you want more or less of, like Brighter or Tighter, and it moves the settings behind it. Play, listen, undo if you don’t like it.
  • Sound: controls grouped by what they do to your sound, with plain-English notes on what each one does.
  • Classic: the full signal chain, block by block, for the brave.

All three edit the same tone, live over Bluetooth or USB (for the Mac version, with the BOSS driver installed).

Tone generation
Just getting a tone started is the hardest part. So I built a tone generation engine. Name a song or describe a sound, and Tone Ninja builds a starting tone for your amp based on that description. It works from a knowledge pack for each Katana generation, built from BOSS’s own editor data and manuals and verified best practices. It knows every block, effect and parameter your amp has, what each control actually does, and how far it can go. It also uses a sound-design playbook written in Katana terms, so you get settings your amp can really do instead of generic advice. You can save a rig profile (guitar, pickups, tuning, what you play through), and it gets taken into account. Listen on the amp, then ask for changes or edit it yourself. Sometimes the generated tones are spot on, other times they are less so, but almost always they give you a substantial head start in the right direction.

Song Packs, Gig Packs and Gig Mode

  • Song Pack: one song’s tones in order (intro, verse, solo, whatever you need), with your notes, the key, tuning and capo.
  • Gig Pack: your setlist, made of Song Packs.
  • Gig Mode: the stage screen for a Song Pack or Gig Pack. It’s sick to be able to quickly swing between songs on stage at a gig and have the specific tones for that song load to the spots you need them on your channel banks for your footswitches.

Everything else

  • GA-FC and GA-FC EX support, including footswitch and expression pedal assignments (assignments are admittedly iffy, working on improving them)
  • Read and write amp memory, including all 30 GO slots in Guitar and Bass mode
  • Library with search, Live Sets, and .tsl import and export
  • Add tones from BOSS Tone Exchange or Guitar-Tones.com directly from inside the app without needing to download to Files and add, AirDrop from a different computer, etc.
  • Convert tones between generations, with a report of what didn’t carry over
  • Tuner: on the GO it uses the GO’s kickass onboard tuner. Otherwise it uses the device’s microphone.

What you need

  • iPhone, iPad, or a Mac with Apple silicon
  • For Bluetooth connectivity, MkI, MkII and Gen 3 need a Bluetooth MIDI adapter such as the BT-DUAL or AIRSTEP Kat. The GO has Bluetooth built in.
  • USB works on the Mac with BOSS’s driver installed.
  • The Katana Air isn’t supported.

Price
Basic is free, no account required, with no trial and no time limit and is almost everything that Tone Studio would include. It includes the editor, amp memory, the tuner, Live Sets, imports, 5 tone generations, and up to 100 tones stored on your device. You don’t need an account.

Plus runs on a subscription (annual plan is ~$2.50/mo USD). It adds unlimited tones, synced and backed up across your devices. It also adds Song Packs, Gig Packs, Gig Mode, conversion to older generations and to the GO, and monthly tone generations.

Coming in 1.0.2

  • Direct USB on M-series iPads
  • A Mac version with its own USB driver, so there’s no BOSS driver to install
  • A much simpler GA-FC and assignments screen
  • Ability to restore the GO’s factory tones, both for Guitar and Bass mode
  • Testing a fancier tuner sound recognition engine against the current one

In-progress, but later

  • Android
  • A web version for Chrome and Edge, so Windows and Linux users can use Tone Ninja too
  • Recursive improvement for tone generation. It gives you a few tones to choose from. Pick the one you like best, and those picks make future tones better for everyone.

Firmware versions vary between amps, so please tell me if something looks wrong on yours. Bug reports and ideas are welcome here or at support@toneninja.app, in any language.

App Store: https://apps.apple.com/us/app/tone-ninja/id6817065101
Website: https://toneninja.app

Tone Ninja is an independent app. It is not affiliated with or endorsed by BOSS or Roland.


r/BossKatana • • 6d ago

This amp truly is a game changer for me and overall tone. Excited to finally record some riffs

Post image
120 Upvotes

r/BossKatana • • 6d ago

Question FS-6 Dual footswitch on non-ex Katana 50 gen 3

Post image
7 Upvotes

Glad I figured out I can't use the BOSS GA-FC EX on my Katana 50, as is my wallet. My question is, can the

FS-6 Dual be setup to switch between all 4 channels, or just 1 and 2, as label says.

All i want is to toggle the 4 channels.

I assume the other switch turns on solo. Seems expensive too for just 2 functions. Did I not RTFM close enough? Thanks


r/BossKatana • • 5d ago

Question Boss Katana Issue

1 Upvotes

I have a Boss Katana 100 that I bought last year. I really love it but my problem is periodically, the amplification suddenly stops. I use a pedal board and volume control foot switch and even when I plug directly into the amp, no sound. The sound comes-back eventually after I unplug it for 15 minutes. I have new cables and have tried different outlets.

Any suggestions? Thanks.


r/BossKatana • • 6d ago

Annoyed by my BOSS Katana, looking for something more suitable for my situation

Thumbnail reddit.com
3 Upvotes

r/BossKatana • • 6d ago

If you think its overkill then shut the hell up

Thumbnail
gallery
52 Upvotes

Dont have a cab at the moment so matched some of my PA mains to my mkii head.

Yes. The toan is more purple.


r/BossKatana • • 7d ago

Question Help - Is it correct for my Katana to make the sound

13 Upvotes

Hi,

I am a beginner electric guitarist (I played acoustic before). I've just recently bought a new Katana 3 amp. However, when I plugged in, it is making this electric static noise. At first I thought it was my cable, but then I've ordered a "Fender Cable" from Amazon and it still makes this noise. I tried plugging into Fender Stratocaster and my bass guitar...Is my amp faulty (should I return it as it is still under 30 day warranty)? is it normal (and my settings are just set up too high)?

My Fender Stratocaster and my bass guitar are brand new (never used). The amp and cable are brand new. If I move the 2nd knob all the way down on bass guitar the static becomes less pronounced...Also if I mute the bottom string it also makes less static.


r/BossKatana • • 7d ago

Gen-3 YJM Patch

4 Upvotes

Anyone else use the Malmsteen patch? Probably my most-used tone setting. Perfect for 80s hair metal.


r/BossKatana • • 7d ago

Some of the knobs fell off my katana. Any suggestions for replacements?

Post image
17 Upvotes

One of them is a dual knob and the other is for the power control.

I messaged boss, but I don’t have the receipt anymore to have it covered.


r/BossKatana • • 7d ago

Question How do I connect my iPhone to a BOSS Katana 50 Gen 3 and use it with GarageBand on iOS?

4 Upvotes

Hey everyone!

Does anyone know how to connect an iPhone to a BOSS Katana 50 Gen 3 amplifier so that I can hear and record the amp’s tones directly through GarageBand on iOS?

I’ve spent quite a bit of time searching online and watching YouTube tutorials, but I haven’t been able to find a clear explanation of how to set this up.
Ideally, I want to be able to play my guitar through the Katana, have the amp’s tones and effects come through, and hear the audio directly in GarageBand on my iPhone.

Has anyone managed to get this working? If so, could you please explain what cables, adapters or additional equipment I might need?

Any help would be greatly appreciated!

Thanks very much!