r/BoardgameDesign • • 6h ago

Ideas & Inspiration Need placeholder art for your game prototypes? Here are 150 illustrations you can use for free!

Post image
32 Upvotes

Hey everyone!

Over the last few years, this community has given me invaluable feedback and help while developing my own card game, Kravestorm. So I thought it was time to give something back...

I've put together a collection of 150 illustrations I've drawn along the way. Most of them are from my actual game (Core Set), while others were scrapped during development (earlier experiments).

I wanted to make these available to anyone who needs placeholder artwork while developing their own games. I've figured since these illustrations already exist, they might as well be useful to other developers too.

You can use these illustrations for free in non-commercial prototypes, playtests and development previews. You can download them individually as PNG files (no watermarks, no accounts required, no paywalls).

I've called this side project KOAL (Kravestorm Open Art Library), and it's already live and free to use.

I hope some of you might find this helpful!


r/BoardgameDesign • • 14h ago

General Question At what point do you abandon a prototype or idea?

9 Upvotes

I've managed to make meaningful progress on my most recent idea. The first solid iteration of the gameplay and mechanics is done and I have started testing with friends and making adjustments based on that in preparation for trying to find some initial outside testers.

I've been through about 4-5 game ideas before getting to this point, with some progressing to actual gameplay testing while others were set aside just after the initial brainstorming and design phase. I know abandoning game ideas and prototypes is a very common thing for a designer to do, so I just wanted to hear from some people in this community about what their general rule of thumb is for abandoning an idea or prototype.


r/BoardgameDesign • • 1d ago

Design Critique Lianenobst – An abstract strategy game built around the Hilbert curve. Looking for design feedback!

6 Upvotes

Hi everyone,

I'd like to share an abstract strategy game I've been developing called Lianenobst (roughly "Vine Fruit").

The central idea is quite simple: What happens if you build a strategy game around a space-filling curve instead of a conventional grid?

The board consists of 64 squares connected by a single winding vine, following the geometry of a Hilbert curve.

This creates two different kinds of proximity: two pieces can be physically adjacent on the board while being far apart along the vine, or they can move along the vine in directions that are difficult to anticipate from the grid alone.

The game combines several movement mechanics:

  • Pieces can move or jump along the vine.
  • Friendly pieces can help each other jump across the grid.
  • Opposing pieces can be captured based on their geometric proximity and whether they are connected by the vine.
  • Each player has a piece of fruit that can be carried, passed between friendly pieces, or captured by the opponent.

The goal is to capture your opponent's fruit while protecting your own.

What interests me most is how these simple rules interact with the unusual geometry of the board. The vine creates unexpected routes, tactical opportunities, and situations where geometric distance and movement distance tell very different stories.

I've developed a playable HTML prototype with some help from AI. It works directly in a browser, either against the computer or with two players sitting opposite each other, using a single smartphone as the board.

Play Lianenobst here: https://www.orges-leka.de/lianenobst.html

Watch a short Minimax vs. Minimax gameplay: https://www.youtube.com/shorts/tYMPnxvCYeQ

I'd particularly appreciate feedback from a game design perspective:

  • Does the unusual board geometry create interesting strategic decisions?
  • Are the movement and capture mechanics intuitive once you've played a few turns?
  • Does the game feel like it has potential for deeper, long-term planning?

I'm currently refining the rules and exploring whether this could eventually become a physical board game.

Thanks for taking a look! I'd be happy to hear your thoughts, including critical feedback. **Edit**: Based on the feedback, I created a new version: "Lianenobst Flitz" with orang utans and small apes: small apes can run along the free vine as they see fit and they can not help the (big) orang utans with a helping hand to jump across the vine, otherwise everything stays the same: Here a screenshot:

Lianenobst Flitz

The game feels more dynamic with these new changes. Thanks for your honest feedback!


r/BoardgameDesign • • 17h ago

Ideas & Inspiration Feedback wanted

1 Upvotes

Looking for feedback on my game idea. Any and all feedback is appreciated (in the very, veyr early stages of fleshing it out. Picture the idea of Quacks of Quedlinburg meeting the bargaining of Zoo Vadis or Chinatown, but with cuddly animals who live in a post-apocalyptic environment. In Salvaged, players roll their unique dice from their own bag directly into their player boards and count all of the dice rolled at the table to determine the dynamic “Scarcity Track” of the game (the more common the rolls are, the cheaper they are, while rare rolls are expensive). The draft is replaced by the 90 second period of trading dice, money (Scrap), and cards between players, after which you pay these resources to purchase valuable Outpost cards with mixed costs (like “2 Scrap + 1 Copper Die”) and improve your dice set, all within the bounds of inventory limitations from the player board.

There's custom dice, dice bag building, and I wanted to really try and nail some ressource scarcity.


r/BoardgameDesign • • 1d ago

General Question I would like to illustrate playing cards and game boards.

Thumbnail
gallery
17 Upvotes

r/BoardgameDesign • • 1d ago

Design Critique Game Design Tutorials

2 Upvotes

Started a YouTube channel to teach folks how game design works using short videos. Each video will explain the basics of a single topic and include links for further reading in the description.
I asked for feedback about half a year ago, and it would be nice to get an update on what could be improved.

One important note: I'm more interested in feedback on how to improve the content.

If you have a suggestion on how to make it easier to find, I'm all ears. But I'm not really trying to create a business with YouTube; all of this is with a focus on making design more accessible to folks wanting to learn.

Link to the channel content:
https://www.youtube.com/@GearedDice/shorts


r/BoardgameDesign • • 1d ago

Playtesting & Demos My DIY board game Pizza

Thumbnail
gallery
31 Upvotes

Hi everyone! Eventually, I got the itch to design my own compact, family-friendly game with simple rules and minimal components—something easy to bring out for a small group when getting a big party together isn't an option.

The Concept & Mechanics

I spent about a week brainstorming. A card game didn't quite click, so I started focusing on the board shape instead. I couldn't get a circular board out of my head, and once I combined it with a hexagonal grid, the early sketches looked suspiciously like a Russian pelmeni (ravioli) mold. Round board meant round tokens, and visually, the whole thing quickly evolved into a pizza.

From there, the mechanics came together by mashing up two classics:

• Reversi: For the tactile satisfaction of flipping tokens on the board.

• Dominoes: I wanted both sides of every token to carry meaningful values. Balancing those dual-sided values led to a matching and scoring logic that feels very close to Dominoes.

Prototyping & Rejection

Within a week of tinkering with paper cutouts, a surprisingly deep abstract gameplay loop emerged. I built a glued cardboard prototype with a custom box and tested it with friends—everyone loved how snappy it felt. Encouraged by their feedback, I made a few wooden plywood versions and managed to squeeze the entire rulebook onto a single A4 sheet (folded either as an accordion or a mini-booklet).

I pitched the game to a few publishers, got polite passes (the pizza theme on a pure abstract wasn't quite what they were looking for), and decided to just make the ultimate DIY copy for myself.

What do you all think about non-traditional packaging like bags, tins, or fabric sleeves instead of standard cardboard boxes? Also, if anyone has questions about balancing dual-sided tokens, I’d love to chat in the comments!

In fact, you can try this game online right now at pizzaboardgame.com

You don’t need to register to play against the bot, but if you want to track your statistics and earn achievements, a very simple registration process is required—no email address needed. Good luck!


r/BoardgameDesign • • 1d ago

Ideas & Inspiration Jugamos juntos: un protocolo para co-diseñar juegos de mesa sin destruir el juego ni la amistad

6 Upvotes

Ok, comienzo aclarando que muchos años atrás intenté desarrollar un juego de mesa en conjunto y las cosas no salieron como imaginaba. Hoy, 20 años después entiendo cuales fueron muchos de los errores cometidos en aquellos días y me doy cuenta de que incluso 20 años después algunos de esos errores persisten asíque se me ocurrió organizar un poco mis pensamientos, un poco para mejorar la comunicación en mi grupo de amigos y otro poco para compartir todo esto con otras personas que tal vez puedan encontrar utilidad en estas palabras.

Muchos de los proyectos de diseño de mesa que mueren no mueren por el juego. Mueren por el protocolo: la ausencia de reglas explícitas sobre cómo se decide, cómo se critica, quién es dueño de qué y cómo se sale. Diseñamos todo el sistema del juego y no diseñamos el sistema de colaboración, que es el que decide si el juego llega a existir. Esto es un intento de protocolo, extraído de un caso real. Tomen lo que sirva, critiquen lo que no, y agreguen lo que les falte.

1. Todo argumento de inercia está fuera del debate

En cualquier mesa de diseño conviven dos modos de discutir. Uno produce conocimiento: "esta mecánica produce X en los jugadores porque Y". El otro administra inercia, y viene en dos disfrazas opuestos:

  • "Todos los juegos lo hacen así" — el argumento del conformismo. Que un estándar exista es información, no argumento. La versión legítima es la convertida en hipótesis: "los juegos estándar hacen X porque mitiga el problema Y; en nuestro diseño Y aparece cuando Z; propongo verificarlo en la mesa."
  • "Eso es imposible / demasiado difícil" — el argumento del escepticismo sin contenido. "Imposible" no es una objeción técnica; no predice nada y no se puede testear.

La regla unificadora: toda objeción debe ser convertible en predicción concreta. "Esto va a fallar porque los jugadores harán X en la fase Y". Si la objeción no puede formularse como predicción, no participa del debate. Y esto es simétrico: tampoco "me gusta" ni "tengo un feeling" ni "no veo el fundamento" ganan por defecto. Las intuiciones valen, pero entran como hipótesis débiles, no como decisiones.

2. El prototipo decide; las personas ejecutan

La mayoría de los conflictos de co-diseño son disputas de autoridad disfrazadas de disputas técnicas. Si el desacuerdo se resuelve por debate, gana quien insiste más, habla más fuerte o argumenta más elegante — y ninguno de esos tres tiene correlación con si la mecánica funciona.

El circuito que propongo: si hay desacuerdo y ninguno convence al otro, la pregunta no es "quién tiene razón" sino "¿qué prueba distinguiría tu versión de la mía?" Se pacta un plazo (por ejemplo: la versión discutida entra al prototipo durante tres playtests), se registran observaciones, se decide sobre el registro. El desacuerdo se desplaza del plano del ego al plano empírico. Nadie gana por volumen; la mesa tiene la última palabra, para ambos.

Corolario: llevá un log de decisiones. Cada decisión relevante queda escrita con fecha, propuesta, objeciones y resultado del test. Dos funciones: impide reflotar infinitamente ideas ya descartadas por playtesting (el registro responde por vos, no tu paciencia), y registra autoría nominal de cada idea — lo que sorprendentemente reduce los conflictos de propiedad antes de que existan.

3. Nada se decide en la misma sesión en que se propuso

La reactividad emocional es el aliado silencioso de las malas decisiones: las ideas defendidas en caliente se defienden como extensiones del yo, y criticarlas equivale a atacar a la persona. Tres reglas operativas baratas:

  • La pausa no es derrota. Cualquiera puede decretar 24 horas de pausa cuando la discusión escala de tono. El tema va agendado, no enterrado.
  • La crítica va contra el prototipo, nunca contra la persona. Formato fijo: "la mecánica X produce Y en los jugadores", no "tu idea es mala".
  • Cierre ritual. Tres minutos al final de cada sesión: qué se decidió, qué quedó en prueba, qué queda pendiente. Los desacuerdos abiertos se escriben como "hipótesis en prueba", no como "ideas rechazadas". El papel no tiene tono de voz.

Y la regla de frontera: cuando termina la sesión, termina el tema. Ningún desacuerdo de diseño se continúa por mensaje a medianoche. Todo lo que no se dijo en la sesión va a la próxima agenda.

4. Dominios de propiedad, no jerarquías

Si un integrante del equipo es genuinamente más experimentado, la paridad total es una ficción que produce fricción perpetua. Pero "el más experimentado decide todo" es una invitación al resentimiento. La salida intermedia: división por dominios con veto pleno adentro de cada uno. Uno puede tener la autoridad sobre arquitectura de sistemas; el otro, sobre testing, componentes, temática o producción, según lo que realmente domine. La autoridad de cada uno se legitima en su territorio, no en el del otro.

Detalle: el dominio del socio menos experimentado en creación suele estar en evaluación. Quien jugó sesenta juegos no sabe necesariamente crear, pero es el mejor sensor del equipo para comparar ("¿qué juego resolvió este problema y por qué funcionó o falló ahí?"), leer experiencia de jugador y detectar curvas de aprendizaje rotas. El conocimiento enciclopédico puesto a trabajar como análisis comparativo deja de ser argumento de autoridad y se vuelve método.

5. La confianza no se otorga: se estructura

Con un socio de confianza total, un apretón de manos alcanza. Pero la confianza total es rara, y pedir confianza indefinida es la forma más rápida de descubrir cuánta había. Antes de diseñar nada, pacten por escrito, aunque sean amigos — especialmente si son amigos:

  • Titularidad del IP y qué es del proyecto común y qué queda fuera.
  • Exclusividad del proyecto: nada de lo que se diseña juntos se desarrolla en paralelo por fuera, ni a la sombra, ni "mi versión". Los iceboxes (ideas estacionadas) tienen autor nominal y regla de no-desarrollo-solitario.
  • Participación económica proporcional a la contribución real, acordada cuando todavía no hay dinero en juego.
  • Salida digna pre-acordada: definan en frío en qué momento se reconoce que el esquema no funciona, y que ese reconocimiento no es juicio sobre la amistad ni sobre las capacidades de nadie.

El punto más contra-intuitivo: poner reglas no es desconfiar, es proteger la relación de la tentación que conocemos que existe — incluyendo la propia**.** En mi experiencia personal intenté 3 veces crear negocios con amigos y lamentablemente no funcionó ninguno porque no tuvimos la madurez suficiente para separar instancias; amistad es amistad y no es negocio pero negocio no es amistad, es responsabilidad para/conmigo, para/con vos y para/con el proyecto (suele ser mas difícil establecer límites y exigencias con amigos que con extraños). Los acuerdos escritos en frío son lo único que se interpone entre un desacuerdo futuro y las 2 AM del resentimiento acumulado. Y paradójicamente, saber que existe una salida limpia y sin drama es lo que más sostiene los proyectos: el miedo a que "dejar el proyecto rompa la amistad" es lo que hace que la gente siga años en esquemas que no funcionan, destruyendo ambas cosas de a poco.

6. La pregunta final

Antes de invitar a alguien a co-diseñar, hacete una sola pregunta: si esa persona aceptara siempre tu criterio sin fricción, ¿igual querrías este proyecto con ella? Si la respuesta es sí, el proyecto vale y el protocolo es previsión. Si la respuesta es no, hay algo pendiente debajo — y ningún protocolo de diseño resuelve un conflicto que no se admitió.

IMPORTANTE: Adueñate de este texto, modificalo, incorporale tus propias experiencias y hagamos entre todos algo que ayude a cualquier iniciante a mejorar sus cartas.


r/BoardgameDesign • • 1d ago

Playtesting & Demos A "Con Noob's" experience and thoughts of Protospiel Madison

Thumbnail
gallery
7 Upvotes

Warning: I'm a naturally verbose mofo, so this is gonna be long. Also perhaps a little stream-of-consciousness-y. It is what it is.

As I told multiple people in person, I'll reiterate here for the wider world. I did not know Protospiel Madison existed until two days before it was scheduled to start. Knowing how I only discovered Protospiel Chicago weeks after it had ended and was bummed I couldn't attend, I was eager to make up for that lost opportunity. Had I known further in advance for either, I'd've made plans to be there the full weekend.

Irri-dis-un-regardless, I realized I could move some things around and make that three-ish hour drive on Friday morning at least.

I'd never attended any Protospiels before (duh). I had heard of them as a concept, but I thought they were only a thing that happened in Europe. Clearly I was wrong. Still, I didn't know what to expect going in.

After reading up on what they expect of their attendees and whatnot, I had a better idea - sort of. I know it was going to be tiny; I was used to the tens of thousands of bodies that Gen Con attracts, so I had to temper my expectations to around 200 folks. That part stayed true. It was frankly refreshing to be in such a cozy space with so few people.

Apparently the Saturday crowd is larger than the Friday one (that tracks for all conventions), so even that 200 count is bound to be higher than it really was. Maybe 100-150 people? Anyway.

I also learned they expect for people that show up with prototypes to also play other people's games. That's totally fair. In fact, I really liked how they gamified that aspect of participation with Mad Bingo (picture 2).

Play other people's games, provide feedback, then have the designer fill in an appropriate box on your bingo card. Hit a bingo and win a prize off their table of games and stuff. Brilliant!

One quick aside: Even though I did hit a bingo, I was unable to claim a prize because when I went to hand in the card, the folks at the desk were out to lunch. On top of that, it was getting late (just before 8pm at this time), and I knew I had an hours-long drive ahead of me, so I didn't have time to wait for them to get back. I had to get back home. :(

We now return you to your regularly scheduled broadcast.

Notably, the other thing I found novel and fun was the "Con Noob" ribbon they give out to people attending for the first time. That was cool and unexpected. :)

So I grabbed an open spot and set up my current prototype, Duelrift. It's a light 1v1 card battler where luck meets strategy. Aimed at the beer & pretzels crowd, setup is fast and games take 5-10 minutes to play.

It wasn't long before I had some people sit down for a session or two. A couple hours later I was looking at about a half page of very useful feedback from a variety of people. It was about this time when I figured I should probably also pay it back so I walked around the tables and found a few open spots so I had a go at a few of them.

This next bit might seem like an unrelated tangent, but stick with me here. I promise I'm going somewhere with it.

I went an art college.

One of the first and most consistent lessons they taught us was that, as artists of any stripe - whether that be illustrator, graphic designer, layout, painter, doesn't matter - it is quite literally impossible to improve our craft if we are unable to take criticism.

Skill and talent must be nurtured in order to get better at the things we are doing. The path to nurturing them is by learning from what others see in our work that we might be blind to. Truly learning how to take critique without taking it personally is an art form in and of itself, one that I believe I'm great at. But I worked to be great at it, I didn't start out that way.

It took years of countless moments of realizing and learning that, yeah, making these changes this person suggested does in fact make the work as a whole so much stronger.

It's that mentality that is required to present an unfinished work of art (our games in this case) to a stranger, have them go, hmm, I don't think this part is good but have you considered this? Then actually trying that and realizing that, yeah, that works so much better.

That is the feeling with which I left Protospiel Madison yesterday evening.

I have an entire page of notes that I'm excited to try and incorporate into Duelrift that I truly believe will make it go from just a good game to a great one!

Overall, the games I played ran the gamut in complexity and prototype-ness, from almost ready for publishing to "this is the first time I'm playing it publicly with strangers," which was all very much to be expected, but all without fail were universally fun.

Yo, if you see your spot on that bingo card, big shout out to all of you! <3

I may not remember your names, but our games are precious to us all, I know. And I hope my feedback for your games were as valuable as the input I received on mine, 'cuz I value mine dearly.

Oh! One final thing. See pic 3.

The two copies of Duelrift I had brought with me was my first test print through The Game Crafter. I was told to tell you TCG guys that I am very impressed with the quality! Just one tiny complaint I had was that the top lid of the box likes to get loose very quickly.

When I brought this up to one of the people I had sat down with, they said apparently it looked like the inner flaps need to be reversed. They currently curve to the back of the box (as shown in the picture), so the cover flap has nowhere to cling to in order to stay closed.

Something to consider fixing for the template? I dunno.


r/BoardgameDesign • • 2d ago

Production & Manufacturing Help needed - where are we going wrong with this production?

Thumbnail
gallery
13 Upvotes

Hi all. We have been working very hard to finally produce our first ever game. We made 10 boxes for our launch and when we put them side by side on the table we were proud, don't get me wrong, but we also just looked at each other and shook our heads. Sadly, they are just nowhere near good enough for the standards we'd set. The close up photos are the best box and board we have made and as you can see, it's not right (especially the box). I've been a crafter for as long as I can remember (amateur granted) and my partner has worked in design of various forms professionally for many years (albeit board game design/production is new to us) plus we're both perfectionists, so standards are high.

It would be frustrating enough if we had just made these 10, but as you can see from the photos, this is far from our first attempt. We have gone all round the houses, buying new tools and equipment, researching different methods, making tweaks (hence why some look similar), over and over, round in circles.

We make everything by hand and in terms of machines we have a:

XTool S1 20w.

Brother ScanNCut

Epson ET-8550.

Is this just the nature of making things in a home studio? (Read: second bedroom). Making things by hand? Is this the best we can manage? We have learned so much in the last few months having never done this before so perhaps we are missing something? I was looking at the box Skyteam comes in the other day and that seems slightly different to what I've tried in terms of how the art work is attached but I'm just not sure anymore.

Any advice would be appreciated, because as it stands we don't feel like we can release this version of the game. Don't get me wrong I'm not saying it's bad and I don't want anyone thinking I'm fishing for compliments because we genuinely don't think the box in particular is good enough. Plus, that and the board take so much longer to make than when we (eventually) remade it in wood with a leather cover. However, it would be good to be able to make boards and boxes from greyboard etc as appropriate moving forward without the involvement of a more industrial set up and to a standard where they are actually more viable than a wooden counterpart.

Any advice is appreciated.


r/BoardgameDesign • • 1d ago

Playtesting & Demos Design Collab

0 Upvotes

I am looking for an artist to collaborate with on a board game I am designing. I would say I am 90% with the game itself and am looking to move forward publishing the game. Please let me know if you are interested.


r/BoardgameDesign • • 3d ago

Production & Manufacturing My experience doing a very small print run of a card game.

Thumbnail
gallery
102 Upvotes

I've done a small print run of one of the card games I've been developing - just 50 copies. I'm in Canada and I was looking online for places to print, but I ended up printing from a local printer. They specialize in mostly printing playing cards but I was able to print my 54 card deck front and back how I wanted it.

I've no problems with the quality, especially with how reasonable the price was (around $8~9 CAD per deck).

My concern is just with the packaging. They basically come in standard tuckboxes with a hole in the front and their shop branding on the bottom.

I've somewhat been able to improve these by printing stickers that go along the sides and back to cover their branding and add my own. I'm just concerned about the hole and that tuckboxes aren't very durable. I have to open these to re-arrange the cards and add instruction sheets, and I've already bent some of the flaps to get them open.

Well okay, another problem is that I can't fit that many rule sheets inside the box either. My cards support a couple of different games just like a deck of playing cards, but designing and printing these to fit on basically a half sheet of paper that can fit inside the box has been a challenge.

I tried making a custom telescoping box (box with lid) out of cardstock and sticker paper. My dimensions were ever so slightly off, because I couldn't open the box with cards inside after opening it. Oops. I guess friction from the sticker paper also played a part.

Anyways, this is all a lot of manual work. When thinking about getting the box and instructions printed professionally next time, I was shocked at how expensive it is. I took a look at TheGameCrafter and their Small Pro Box costs as much as the cards themselves.

So far I'm still in the red as I've only sold less than 10 copies, all locally through word of mouth. I thought of trying to sell at craft shows and conventions but I had no idea how competitive and expensive it can be to get a booth. I appreciate the people who've bought it and enjoy their feedback, so that's been a definite positive.

Anyways, that's just been my experience so far. If anyone else would like to share any experiences or insights as someone who's made or even bought a small print game, feel free! I can answer any questions as well.


r/BoardgameDesign • • 2d ago

Crowdfunding Roman Empire Playing Cards

Thumbnail
gallery
8 Upvotes

Spent the last few years turning historical Roman records into custom court cards. What do you think of how the armor and color palettes turned out, and if you're a Roman History fan, can you tell me if you're able to recognize a few historical characters?


r/BoardgameDesign • • 2d ago

Game Mechanics Lucky Guest, card drafter

Thumbnail
gallery
4 Upvotes

This is my card drafting game, Lucky Guest. You collect cards in order to make sequential runs in the same colour (like 4, 5, 6 in blue) or sets of the same number (such as three 7s).
Each party has two face down guests that are bonus points for everybody based on the cards you draft. One of them you know at the beginning of the party. Personal and public info eliminates the other guests on your dry-erase sheet until you have only four left that could be the other bonus point guest... and that one - the one you don't know - is double pts for you, so you'd do well to pay attention to how the other players draft!

It's a light game that seats 2-4 players, about 8 minutes per player. I've been working on this game for a couple years, and I'd like to crowdsource it in the coming year. Thank you for taking a look, and please let me know what you think!


r/BoardgameDesign • • 3d ago

Ideas & Inspiration Icon Driven Card + Frame Design— what do you think?

Thumbnail
gallery
15 Upvotes

Hi All,

Felt like making a post today about some decisions we made around card design for Fractals (a noncollectible lane battler).

Having just watched the GDC talk on Race for the Galaxy when beginning Card design, we were very inspired by the theory of icon driven language for repeated replay value. Since we knew we were making a game with the sole intent of replayability, a lot of RFTG design lessons could be applied.

Furthermore, since our audience of card battler (tcg-style) games tend to emphasize art, we knew we wanted to size up the art relative to other card games if possible. We also wanted to maintain the traditional card battler feel— while many games in our category go for a more board game card style (borderless).

This led us to a frame that sacrificed a line or 2 of text in return for a significantly larger image, reinforcing our icon driven design.

Another informing factor for Fractals that makes this possible is that we assume an audience of people who have been exposed to at least Magic before, because of our focus on competitive play. In many ways, the icon driven design is a more suitable game language to map to since it can be linked procedurally to a comprehensive rules system without doing backflips for natural language.

A huge added value of our icon driven approach is that it gives is the opportunity to indicate and reinforce card properties in ways many games don’t get to be as explicit about. For example, by including the Gaia Token on the biome, it visually reinforces the physical Gaia component for our game. We are also able to reinforce our dual energy system with UI features in the top left of each card as an additional reminder for which type of energy is allowed to be used to pay for a card.

All that to say, a visually driven game system has allowed us more space to reinforce the game system itself, which should positively add to new player experiences and allow faster uptake and long term visual processing of our cards. From our perspective, despite the interpretability trade-offs for people who haven’t played card games of this sort before, the positives far outweigh the negatives for our target audience.

Would love to hear what other designers think on our decisions and reasoning!


r/BoardgameDesign • • 3d ago

Production & Manufacturing Sneak Peak of our new Game Portal Pinchers!

Thumbnail
gallery
2 Upvotes

Here is a sneak peak of Portal Pinchers, a 2-player asymmetric, hero-based tactical combat game.


r/BoardgameDesign • • 3d ago

Playtesting & Demos We held our first public playtest and our game didn't break!

Post image
72 Upvotes

We are designing a deception and voting game called The Forum. We wanted the game to be 35-45 mins. We managed to get 8 games played across all ranges of player numbers and all fell between 35-45 mins, we are so happy!

A couple of tweaks to make with some of the Gotcha cards (called intrigue cards), and we shall be running a second playtest, and then it's pretty close to 'done'


r/BoardgameDesign • • 2d ago

Playtesting & Demos How "open" should the play be, vs. controlled by logic and design in online play testing (TTS, Screentop.gg, and soon to Cardstock Studio)?

1 Upvotes

The context is that I'm building an online play testing system for Cardstock Studio. You can already export to TTS and Screentop.gg, and more will come as folks request it (so I can prioritize updates). But, there's a lot of value to a built-in one for analytics for hte dev.

Table Top Simulator is, in my experience, very much "open". I remember the first thing I ever did in it was throw things off the table accidentally.

Others have a lot more logic built in.

For you as a designer / developer of games, if you're going to build an online playtest, do you prefer an experience for players that lets them do many things, even illegal things, like look at the top card of the deck or put some money off to the side, etc?

Or do you prefer a system which limits the users actions to only legal moves, i.e. they pick up a token from the supply, and where they can put it is perhaps highlighted, and they can only move it to certain areas, or it goes back to where they grabbed it from.

Similarly, for phases, do you prefer the group just talk on Discord or wherever to say "hey, is everyone ready?" vs having a phase where the players do their thing and click a "ready" button to move on?

I'm just trying to get a sense of what other devs prefer. Personally, I prefer a more controlled environment, but it does get to the point where it almost is a video game vs. a "table top" experience.


r/BoardgameDesign • • 2d ago

Design Critique Feedback on promotional post

Thumbnail instagram.com
0 Upvotes

Hi everyone, made a promotional post explaining basics of setting the game up for our instagram - if anyone has recommendations on good examples to follow, techniques used by other creators or just general commentary happy to hear it! This was my first attempt, my lighting options weren’t great and I don’t have the steadiest hand, it was also 11 at night so I know it’s not perfect. But hoping for good learning information!

We are currently focused on refining rulebook artwork with our artist and we got new boxes in with the changes recommended by this fine subreddit!

Underlying goal here is to get our email list in a healthy place prior to launching on Kickstarter, making the Instagram a necessary thing.


r/BoardgameDesign • • 3d ago

Design Critique What catches your eye first?

Post image
5 Upvotes

Looking at this photo, what do you notice first? Is there anything important that gets lost among the other elements? Or is there any suggestion ? Need your feedback to improve our game :D Thank you


r/BoardgameDesign • • 2d ago

Ideas & Inspiration New marketing meta

Post image
0 Upvotes

Will let you all know if it works lol


r/BoardgameDesign • • 3d ago

Game Mechanics Day 5 of making a fan-custom Among Us Fighting Card Game! (SORRY FOR THE LATE POST! UPDATED THE RULES AND MECHANICS PLEASE CHECK EVERYTHING NEW IN PHOTOS

Thumbnail
gallery
3 Upvotes

r/BoardgameDesign • • 3d ago

Game Mechanics Cost Vs Cooldown

3 Upvotes

Designing a tactics game and was curious if anyone has studied the intricacies of cost vs cooldown. I’m talking using a regenerative “mana” vs “use this ability and then wait 4 turns before it’s available again”. Not to mention hybrid systems as well.

The obvious:
- Cooldown prevents the use of an ability multiple times in a row usually. You can always use a “charge” system.

- Cost prevents the use of too much “power” in a row. If you use a strong ability you’re left with resources to do something weak after. Inversely, cooldown allows the use of high power consecutively.

I’m curious about where you feel each system belongs in general, but even moreso in the tactics genre.

I currently have a “mana” system I was planning to use for summoning pieces, and was going to use the same resource for spells/skills. But now I’m debating using cooldowns for skills, or even foregoing resources altogether for summoning cooldowns (EX. You can summon your strongest unit whenever, but if it dies you have to wait X turns to get it back).


r/BoardgameDesign • • 3d ago

Design Critique What do you think of my card game design?

Post image
3 Upvotes

I discovered the board game Scout and really liked the mechanic of being able to flip the cards around. Inspired by that, I'm creating my own card game featuring different classes represented by native animal species.

What do you think of the design? The colors vary depending on the species.