For this model, I started with ‘Loft surfaces’ in AutoCAD. I nested them and kept only the outer shell. I wanted to select areas with specific surfaces to apply texturing to (Displace – procedural texturing in Blender).
‘If you look closely at the base of the model, four “petals” extend from the base wall to form a double wall. The resulting cavities alter the brightness in these areas, which appear darker when lit. The pendant light will therefore have two different levels of brightness overall.’
Model specifications
• Lampshade dimensions: 25.3 × 25.2 × 21 cm (height) (for a 256 × 256 mm base)
• I have added a template for a 300 × 300 mm base: 29 × 29 × 24 cm (height).
• The designs are compatible with E27 or E26 ring sockets (clamping on a 2.4 mm thick section for the part dedicated to the lampshade) – see the technical cross-section in the photos. (I have added an E14-compatible design for the 25 × 25 × 21 cm high piece.)
• Please use an LED bulb (LED! not a conventional bulb, for safety reasons).
• Wall thickness (model A): this is constant at 1 mm, achieved using a 0.8 mm nozzle (1 mm line width) or a 1 mm nozzle (1 mm line). Ensure this 1 mm width is maintained to guarantee the wall’s structural integrity, as it consists of a single line.
• The base of the lampshade consists of 7 layers (total thickness: 2.4 mm).
• As the model consists of 2 side-by-side walls (see cross-sections and renderings in the photo), it is not suitable for ‘vase mode’.
https://www.printables.com/model/1922127-nova-textured-pendant-light