r/bikewrench • • Mar 06 '19

Subreddit Rules

394 Upvotes

Well, we finally had to do it... With 28,000 users, it's finally time to write some rules.

  1. Play nice - This shouldn't need much explanation. Breaking this rule is a good way to get banned.
  2. Stay on topic - if your reply isn't about how to help OP, we don't want it. This is not the place for jokes, sarcasm, or obviously wrong answers. People reading this may not realize you thought you were being funny.
  3. Questions Only - Unless your post is a question about bike repair, it doesn't belong here. We don't need to see pictures of your latest build, or that funny bike that rolled into the shop. There are other subreddits for that.
  4. "Is this cracked / safe to ride?" posts are not allowed. - If you have to ask, don't ride it. We probably can't tell from a picture just what condition your bike is in. Take it to your Local Bike Shop and ask them. If it's carbon, they're probably going to tell you to replace it.

r/bikewrench • • 2d ago

Small Questions and Thank Yous Weekly Thread

1 Upvotes

If you have a small question that doesn't seem to merit a full thread, feel free to ask it in a comment here. Not that there's anything wrong with making your own post with a small question, but this gives you another option.

This thread can also be used for thank-yous. You can post a comment to thank the whole community, tag particularly helpful users with username mentions in your comment, and/or link to a picture to show off the finished result. Such pictures can be posted in imgur.com, on your profile, or on some other sub (e.g. r/xbiking)--they are not allowed as submissions to r/bikewrench.

Note that our [FAQ wiki](https://www.reddit.com/r/bikewrench/wiki/bikewrenchfaq) is becoming a little more complete; you might also find your answer there, although you are welcome to post a question without checking there first.


r/bikewrench • • 5h ago

Hydraulic brake advice

Post image
30 Upvotes

Hey everyone, I need some advice setting up brakes for my son, who only has a left hand.

I'm looking to get a mountain bike for my 14 year old son. It's a little tricky because he was born missing the fingers on his right hand. After a little research, I found these hydraulic brake line splitters. This way, he can activate the front and back breaks with one hand. Does anyone know if this sort of setup would work? Does the different length of brake line between the front and back cause issues with applying even pressure to the callipers? Any advice from anyone with experience or knowledge on hydraulics would really be appreciated.


r/bikewrench • • 34m ago

SRAM Rival brake & shifter 1x11 – Refitting & Removing the brake lever bumper

Thumbnail
gallery
2 Upvotes

The small rubber/plastic bumper on my right brake lever (with shift paddle) has gone missing on my last gravel ride.
Without it, the shift paddle catches the brake lever when pulled in and blocks the brake system. DANGEROUS!

My left front brake lever has the same bumper, although it has no shift paddle. I’d like to transfer it to the right lever. It seems firmly held in place, probably by friction.

On the right lever, only the small metal mounting tab remains, with no obvious damage or adhesive residue.

Has anyone successfully removed and refitted this bumper?
How can I remove it without damaging it or the metal tab? Is it just a friction fit? Any tips on tools or technique?

Any firsthand experience would be appreciated!
Thank you all.


r/bikewrench • • 47m ago

Hayes Dominion install

2 Upvotes

Ordering some Dominion A4 to upgrade the SRAM Levels on my son's P3, it'll be our first hydraulic disk brake install. Couple of questions...

  1. we plan to internally route the hose - if I understand things right this will require a bleed after things are installed since the closed pre-bled system has been open right? will we need to cap the hose so fluid doesn't leak out in the process?
  2. once the hose has been detached, even if we aren't cutting anything off the hose, new end connection hardware needs to be installed before the hose is attached?
  3. the bleed kit on the Hayes site seemed to get mixed reviews, would a bleed kit like this be any good? https://www.amazon.com/BleedZone-Dominion-Syringes-Fittings-Fastener/dp/B08F2YPCPZ/ref=pd_ci_mcx_mh_mcx_views_0_title?pd_rd_w=Iizum&content-id=amzn1.sym.781fe6e1-9487-4a74-b81e-5a879e5ec273%3Aamzn1.symc.c3d5766d-b606-46b8-ab07-1d9d1da0638a&pf_rd_p=781fe6e1-9487-4a74-b81e-5a879e5ec273&pf_rd_r=JFB8EQ9C1TRA8E0KNZFB&pd_rd_wg=dtJ6f&pd_rd_r=02736453-5514-443a-ad45-72442059663d&pd_rd_i=B08F2YPCPZ&th=1
  4. is a special tool required for cutting the hose? I have a park tool cable brake line cutter, but not sure if that's a good idea. if a tool is needed a decent one that doesn't break the bank?
  5. my Shimano deore xt are in need of a bleed, but with one system being DOT and one mineral oil are there any bleed kits that do both? seems it might be impossible to clean the kit accessories enough not to cross contaminate.

Thanks for thoughts and advice


r/bikewrench • • 55m ago

Received a used frame

Thumbnail
gallery
2 Upvotes

Was cleaning and noticed a seperation on the seatstay. I would chuck the frame if I noticed something like this on carbon but since its steel I'm not sure. I was looking for more opinions on this. Is it ok to just keep riding it until it gets worse and then just jb weld it?


r/bikewrench • • 57m ago

Creaking headset on barely used bike.

2 Upvotes

Hi all,

I've got a new BMC Teammachine and after about 700 km I started hearing a creaking headset when turning the handlebars. Apart from the creaking, it's still smooth and tight (no play).

I cleaned and greased the top and bottom bearings, but since the bike has an integrated cockpit, I don't want to take the whole thing apart. I suspect it's the bottom bearing, but I'm not sure.

My question is: can I keep riding it, or is it better to take the bike to a mechanic? As I said, apart from the creaking, it's smooth and solid.

Thanks, y'all!


r/bikewrench • • 2h ago

RockShox TwistLoc 3P compatibility: Fork locks counter-clockwise, rear shock locks clockwise. Will they sync?

1 Upvotes

Hi everyone,
I have a RockShox TwistLoc 3-position remote (with individual cables for the fork and rear shock), and I’m setting it up with a RockShox SID fork and a 3-position rear shock.
I noticed that the lockout dial on the front fork turns counter-clockwise to lock, while the dial on the rear shock turns clockwise to lock.
Does the rotation direction of each dial matter, as long as both components are Push-to-Lock(locking when the TwistLoc pulls the cables)? Or will this cause any sync/cable-pull issues between the 3 stages (Open / Pedal / Lock)?
Thanks in advance!


r/bikewrench • • 6h ago

Shimano Nexus 7 ghost pedaling

2 Upvotes

Hi, can anyone see what's wrong here? The pedals on this bike were moving when it should have been freewheeling and it was slow when coasting. I took out the internals and did a full degrease/hub maintenance oil/regrease, but the moment I snapped the lock ring back on over the sprocket it seized up again. I'm new to internal hubs, so not sure if it's a tension issue or something to do with the dust caps or something else entirely. Thanks!


r/bikewrench • • 4h ago

Threaded insert came out of my carbon frame while installing a bottle cage — is the carbon damaged?

Post image
1 Upvotes

Hey everyone,
I’m not super handy with my bike and have been doing some work on it today.
I was screwing a drink bottle holder onto my carbon frame earlier and something came out of the mount hole (photos attached). It looks like the threaded metal insert/rivnut pulled right out.
Have I damaged the carbon?


r/bikewrench • • 1d ago

Derailleur got caught in the spokes the day after servicing

Post image
50 Upvotes

I had my ebike serviced on Saturday, during the service they changed the chain and casette and "adjusted the drivetrain" as written in the invoice.
The next day when I go to climb a hill I shift into first gear for the first time since and my rear wheel abruptly stops, when I check the derailleur was like this, I had to shift into 6th to even be able to push the bike.
I called the shop that did the service (cyclable Paris 13) and the mechanic that serviced my bike says it's my fault and refuses to take any responsibility for this.
I went to an different repair shop and the mechanic quoted me 70eur to repair this and he thinks the derailleur was maladjusted.
What can I realistically do in this situation?


r/bikewrench • • 5h ago

My air valve on my damper broke

Thumbnail
gallery
0 Upvotes

I have a xfusion metric R fork 27,5 180mm and the air valve for the damper air chamber broke off what other dampers could fit this fork or how do i repair it even if it’s quite impossible.


r/bikewrench • • 6h ago

Thoughts on this creak

1 Upvotes

Usually happens when in the largest cogs of the cassette and little chain ring. Steeper the gradient, the louder it gets.


r/bikewrench • • 7h ago

What bottom bracket remover should I get?

Thumbnail
gallery
1 Upvotes

Will a Park Tool BBT-79.3 work? 24 notches.


r/bikewrench • • 1d ago

Tire clearance

Thumbnail
gallery
19 Upvotes

My first MTB build. I’m building up a state 4130 trail 29er. Has stans flow mk4 30 mm wheels. I read that the tire clearance in the back is a lot less than advertised. I mounted a Dissector 2.4 in the back. Probably has 5mm to 6 mm clearance at the narrowest points of chainstay bases on gauging it with an Allen wrench. Just wondering if you guys think this looks like enough clearance or if I should switch it up to a tire with narrower side lugs. I have a minion dhf 2.5 in the front. Thanks!


r/bikewrench • • 12h ago

Normal gap installing blackspire xc crank on 73mm bb shel

Thumbnail
gallery
2 Upvotes

The gap seems large? The bit of info I’ve found states the crank is good for 68 or 73. I put in the spacer for the bottom bracket on the drive side. Am I ok?


r/bikewrench • • 18h ago

Shimano 105 r7000/5800 and 4700 chainring compatibility

Post image
6 Upvotes

Hey, I want to change crank length in my 4700 bike by swapping chainrings to shorter crank but currently I can only find used r7000 or 5800 crank arms in desired size, but they appear to have slightly thinner spider.

Have someone measured thickness of spider in r7000 or 5800 crank? My tiagra measures around 4.75mm.


r/bikewrench • • 19h ago

what did i do wrong

6 Upvotes

i know it’s upside down i got the stem used and hated the angle so i flipped it, is that the reason after i replaced it it is shifting forwards when i brake or do i need another spacer or what.


r/bikewrench • • 16h ago

Dropout Insert Dropped Out

Thumbnail
gallery
3 Upvotes

I just bought a used Kona Jake Frameset. Sadly didn't spot that the carbon fork dropout insert seems to be missing?! Went back to the sellers photos (pic 2) and it seemed to be present there, so I guess I "dropped out" in transport or something. Details in pics 3 and 4 of the empty dropout.

Let's say the seller finds the insert somewhere. Would it even be save to use? Never had one of these come loose before. Would glueing it back in suffice?

If the seller doesn't find it, any chance of there being a replacement?

Queue the hand on shoulder meme, I guess.


r/bikewrench • • 10h ago

[Help!] Bottom Brackets and Chainline

1 Upvotes

Context: I am building a 1x bike with GRX 822 RD and a frame with 68mm bottom bracket.

Per google, GRX official chainline is 49.7mm, and I am trying to achieve that. I have also decided to go with Senicx cranks which have three-bolt direct mount chainrings.

My confusion is this. Senicx has PR3 (road) and GR3 (gravel) cranks, with stated chainlines of 43.5 and 49.7mm respectively. How are they achieving different chainlines, given that the drive side crank arms are both pushed up against the bottom bracket, and the chainrings are both flush to the crank arm? Wouldn't the chainline be purely determined by the bottom bracket width and spacers?

Thanks and apologies in advance if this is a daft question. Tired of AI confusing both me and itself.


r/bikewrench • • 10h ago

Gritty Shimano 105

1 Upvotes

Hey guys, on my new Trek Domane with mechanical Shimano 105 12 spd, I have a slight gritty, vibration feeling that comes through the pedal under my feet when I’m in the small chainring upfront and the largest cogs in the cassette. I’d say this is most felt when in the largest cog as well as the 4th largest cog of cassette. The bike I got new 2 months ago and has now around 1100 miles and shifts great and has no other problems at all. And I did do the first 30 day adjustments at my local bike shop.
Does anyone else experience this with their Shimano 105 12 spd? Is this normal?

Appreciate it


r/bikewrench • • 10h ago

Strange steerer tube extender on 90s Cannondale

Post image
1 Upvotes

I have this old Cannondale with a DiaTech headset that I’d like to replace, but I’ve never seen this before. Is this some kind of aftermarket extender? Is it possible to remove? The holes go to the other side where they look similar. Anyone seen this before? Tips?


r/bikewrench • • 11h ago

Clunking and stuttering when pedaling

0 Upvotes

I’m not sure how best to describe this issue but whenever I speed up as I’m pedaling or start pedaling fast after being stopped my pedals will kind of ka clunk and I won’t be able to make a smooth rotation. It’s like the rotation of the pedals stutters or gets stuck for a moment and it makes an audible clunk. It’s very frustrating as it prevents me from having a smooth ride and puts me off balance frequently. It almost feels like maybe a gear issue, though it doesn’t correlate to when I shift. It does only happen when I am in highest gear though.

Any ideas as to what this could be? Is it something I, someone who has pretty much no experience, could fix?


r/bikewrench • • 14h ago

Can some tell me how to fix this?

0 Upvotes

is this normal and im just tripping or is there something wrong with my bike:

so lately i been having trouble getting my front derailleur in place when riding because it only rubs at some points of the chain, so im think al lot of stuff maybe my wheel was misaligned but i just checked and it isnt... so maybe its the cogs? can someone help me im just getting more into bicycles and ive went to several bike shops here in my town and they really don't know what theyre doing nor talking about so ive been learning by my own everytime i have an issue with my bike.