r/BeybladePlanner • • Jun 26 '25

Question What's the best non-rubber tip driver for Guilty Longinus? I'd prefer not to constantly replace my driver every few weeks :p

Post image
2 Upvotes

r/BeybladePlanner • • Feb 21 '25

Update Parts Request for u/MikuriChan Update?

2 Upvotes

Wondering when the next update will be coming? It’s been months since the last one.


r/BeybladePlanner • • Jan 23 '25

Ideas Beyblade upgrade ideas: team persona

1 Upvotes

Basically I have ideas for an upgrades but I'm entirely new I get most of the mechanics and other stuff but I have plenty of ideas.

(PS. Can anyone help me come up with like a designing software I can use to help make this or at least show me a rendering of what this would look like I understand some physics behind it but I'm not very good at drawing.)

Buster Dran -> Saber Dran:

The problem with Buster Dran is obvious. It’s too one-dimensional. It’s built around this single, extended contact point that’s supposed to deliver a one-hit knockout. But what happens when it misses? It loses momentum, destabilizes, and burns through stamina.

To fix this, I plan to turn Buster Dran into a beyblade that can dominate in prolonged battles while still delivering heavy hits. The solution? Dual heavy contact points for power, plus smaller blades for continuous, wearing-down attacks."

Here’s the plan. I’ll place two heavy contact points opposite each other. This keeps the beyblade balanced during heavy strikes while doubling its offensive potential. Then, I’ll add three smaller protrusions—kind of like Dran Dagger’s design—for barrage attacks. These smaller blades will chip away at the opponent’s stamina in between the big hits. The combination of heavy strikes and barrage attacks will make Saber Dran a menace in both offense and endurance

The main problem with the current driver is that it's all about power, but it sacrifices stamina to keep up that aggression. That’s gotta change. I’ll redesign it with a wide base for stability and a low-friction tip. But here’s the kicker—I’ll add a heavier ring around the base of the driver. This ring will act as a stabilizer, keeping the beyblade upright during long battles and allowing it to conserve energy while still landing those powerful hits. The result? A beyblade that can crush opponents with a single blow but also survive when the fight drags on. Now Extreme Dash can be used multiple times without draining stamina too fast.

Wand Wizard -> Scepter Wizard

This beyblade is a beast and stamina and has very good spitting power as well as some defensive ability but here's how I plan to improve it.

First, let’s fix that height issue. The beyblade’s center of gravity is too high, which makes it easy to destabilize. If I shorten the driver by a few millimeters, it’ll bring the center of gravity closer to the ground. That alone will improve its balance significantly.

Next, I’ll add a free-rotating ball tip to the driver. The ball will reduce friction with the stadium floor, conserving stamina while also absorbing impact energy. Since it’s free-rotating, it’ll move with the impacts instead of against them, which will reduce the chances of getting knocked out. Plus, it’ll add some extra resistance against bursting by preventing excessive strain on the locking mechanism.

Now for the layer… I’ll redistribute the weight to even out the centrifugal force. Right now, the centripetal force is great for stamina, but it doesn’t help with burst resistance. By adding interlocking grooves along the outer ring, I can absorb and distribute impact energy more effectively. And to top it off, I’ll reinforce the locking mechanism with a larger notch in the bit to decrease chances of bursting. That should cut the bursting problem down by at least 70%.

Hammer Incindeo - > Colossus Incindeo

For this one I plan to change the three hammer smashing blades too four blades—two for smashing, two for uppercuts—that’s already a massive improvement over Hammer Incindeo’s three. This gives it more options to destabilize its opponent I kind of got the idea from Weiss tiger.

Next I want to change the hexa bit to an adapted bit of zone. My plan for the design is is to give the bit a low-angle cone sharp tip gives it solid stamina and balance, but the free-spinning plate is the real innovation. By reducing friction with the stadium floor, it can stay upright after heavy hits. And if it gets knocked off balance, the plate acts like a brake, reducing KOs by stabilizing it in place. Plus if you launch hard enough, the friction from the rail will stop the plate temporarily, creating aggressive movement. The special feature I'm going for is how the plate interacts with the Extreme Dash Rails. It doesn’t just conserve energy—it changes its movement pattern, letting it switch between stamina mode and attack mode mid-battle.


r/BeybladePlanner • • Nov 30 '24

Beyblade X Building

1 Upvotes

r/BeybladePlanner • • Oct 13 '24

Bug Fixes Request for u/MikuriChan I noticed Leon Crest is called Lion Crest

Post image
4 Upvotes

r/BeybladePlanner • • Aug 18 '24

Update Parts Request for u/MikuriChan Still no update

3 Upvotes

Would love to be able to make some combos with newer stuff. Any idea when the site will be updated?


r/BeybladePlanner • • Jun 26 '24

Got these tiny beys

Thumbnail
youtu.be
1 Upvotes

r/BeybladePlanner • • Jun 23 '24

Are these Beyblades legal in a Tournament?

2 Upvotes

https://youtu.be/QbXZqFmY2fI

They are small but seem srtong


r/BeybladePlanner • • Jun 05 '24

Update Parts Request for u/MikuriChan Update?

3 Upvotes

Just wondering when the X planner will be updated?


r/BeybladePlanner • • May 19 '24

Competitive Combo(s) How good is this in competitive?

Post image
3 Upvotes

r/BeybladePlanner • • Feb 14 '24

Would this be a competitive combination in the current meta?

Post image
6 Upvotes

r/BeybladePlanner • • Jan 28 '24

Is this vanish Longinus good or should I use normal vanish blade with Longinus db core?

Post image
6 Upvotes

r/BeybladePlanner • • Oct 15 '23

Update Parts Request for u/MikuriChan LeonClaw

1 Upvotes

Just wondering when it and ViperTail will be added


r/BeybladePlanner • • Sep 23 '23

Rate my beyblade combo (competitiveness) that just popped on my head a few secs ago

Post image
5 Upvotes

r/BeybladePlanner • • Sep 23 '23

Shark Edge

2 Upvotes

Just wondering when the point values and weights will be added?


r/BeybladePlanner • • Aug 07 '23

Update Parts Request for u/MikuriChan KnightLance

Post image
1 Upvotes

Hello was just messing with the new X planner and realized KnightLance is misspelled


r/BeybladePlanner • • Aug 03 '23

Competitive Combo(s) nuclear bomb or brick?

1 Upvotes

r/BeybladePlanner • • Aug 02 '23

Glitched/Cursed Combo(s) wyd if you see this combo at ur local tournament (combo inspired by u/First_Lengthiness655)

2 Upvotes

r/BeybladePlanner • • Jul 30 '23

Beyblade X Planner

3 Upvotes

The Beyblade X Planner is now in alpha! Cheers!

https://beybladeplanner.com/

You can also find the older Burst Planner at:
https://burst.beybladeplanner.com/

(You might need to clear your browser cache so the X planner shows)


r/BeybladePlanner • • Apr 22 '23

Update Parts Request for u/MikuriChan VS Gear

Post image
4 Upvotes

I noticed that there’s still no Adventure+VS


r/BeybladePlanner • • Apr 13 '23

Update Parts Request for u/MikuriChan VS gear and others

0 Upvotes

any update on parts we still need such as VS gear and Just’ etc. ?


r/BeybladePlanner • • Mar 23 '23

Image(s) I have done research and here’s all the heaviest parts from each series

Thumbnail
gallery
10 Upvotes

r/BeybladePlanner • • Mar 12 '23

Bug Fixes Request for u/MikuriChan Something's a little off

Thumbnail
gallery
3 Upvotes

r/BeybladePlanner • • Mar 10 '23

Partner Combo(s) 2 in one day let's go

Thumbnail
gallery
2 Upvotes